--- zzzz-none-000/linux-3.10.107/arch/arm/boot/dts/at91sam9g20ek_common.dtsi	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/boot/dts/at91sam9g20ek_common.dtsi	2021-02-04 17:41:59.000000000 +0000
@@ -5,12 +5,13 @@
  *
  * Licensed under GPLv2.
  */
-/include/ "at91sam9g20.dtsi"
+#include "at91sam9g20.dtsi"
 
 / {
 
 	chosen {
-		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
@@ -18,12 +19,11 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
 
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
+		main_xtal {
 			clock-frequency = <18432000>;
 		};
 	};
@@ -34,10 +34,17 @@
 				board {
 					pinctrl_pck0_as_mck: pck0_as_mck {
 						atmel,pins =
-							<2 1 0x2 0x0>;	/* PC1 periph B */
+							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC1 periph B */
 					};
 
 				};
+
+				mmc0_slot1 {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PC9 gpio CD pin pull up and deglitch */
+					};
+				};
 			};
 
 			dbgu: serial@fffff200 {
@@ -65,7 +72,7 @@
 			};
 
 			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 5 0>;
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
 
@@ -79,16 +86,7 @@
 				slot@1 {
 					reg = <1>;
 					bus-width = <4>;
-					cd-gpios = <&pioC 9 0>;
-				};
-			};
-
-			pinctrl@fffff400 {
-				mmc0_slot1 {
-					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
-						atmel,pins =
-							<2 9 0x0 0x5>;	/* PC9 gpio CD pin pull up and deglitch */
-					};
+					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -98,7 +96,6 @@
 			};
 
 			spi0: spi@fffc8000 {
-				status = "okay";
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
 				mtd_dataflash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
@@ -106,6 +103,24 @@
 					reg = <1>;
 				};
 			};
+
+			shdwc@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd50 {
+				status = "okay";
+			};
 		};
 
 		nand0: nand@40000000 {
@@ -180,16 +195,16 @@
 
 		btn3 {
 			label = "Button 3";
-			gpios = <&pioA 30 1>;
+			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		btn4 {
 			label = "Button 4";
-			gpios = <&pioA 31 1>;
+			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
 			linux,code = <0x104>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};