--- zzzz-none-000/linux-3.10.107/arch/arm/boot/dts/at91sam9x5.dtsi 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/arch/arm/boot/dts/at91sam9x5.dtsi 2021-02-04 17:41:59.000000000 +0000 @@ -9,7 +9,12 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include +#include +#include +#include +#include / { model = "Atmel AT91SAM9x5 family SoC"; @@ -31,6 +36,7 @@ i2c1 = &i2c1; i2c2 = &i2c2; ssc0 = &ssc0; + pwm0 = &pwm0; }; cpus { #address-cells = <0>; @@ -46,6 +52,31 @@ reg = <0x20000000 0x10000000>; }; + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + adc_op_clk: adc_op_clk{ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + }; + }; + + sram: sram@00300000 { + compatible = "mmio-sram"; + reg = <0x00300000 0x8000>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -69,53 +100,354 @@ ramc0: ramc@ffffe800 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe800 0x200>; + clocks = <&ddrck>; + clock-names = "ddrck"; }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; - reg = <0xfffffc00 0x100>; + compatible = "atmel,at91sam9x5-pmc", "syscon"; + reg = <0xfffffc00 0x200>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + main_rc_osc: main_rc_osc { + compatible = "atmel,at91sam9x5-clk-main-rc-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCRCS>; + clock-frequency = <12000000>; + clock-accuracy = <50000000>; + }; + + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91sam9x5-clk-main"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCSELS>; + clocks = <&main_rc_osc>, <&main_osc>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <2000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <745000000 800000000 0 0 + 695000000 750000000 1 0 + 645000000 700000000 2 0 + 595000000 650000000 3 0 + 545000000 600000000 0 1 + 495000000 555000000 1 1 + 445000000 500000000 2 1 + 400000000 450000000 3 1>; + }; + + plladiv: plladivck { + compatible = "atmel,at91sam9x5-clk-plldiv"; + #clock-cells = <0>; + clocks = <&plla>; + }; + + utmi: utmick { + compatible = "atmel,at91sam9x5-clk-utmi"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKU>; + clocks = <&main>; + }; + + mck: masterck { + compatible = "atmel,at91sam9x5-clk-master"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MCKRDY>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; + atmel,clk-output-range = <0 133333333>; + atmel,clk-divisors = <1 2 4 3>; + atmel,master-clk-have-div3-pres; + }; + + usb: usbck { + compatible = "atmel,at91sam9x5-clk-usb"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + prog: progck { + compatible = "atmel,at91sam9x5-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = ; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = ; + }; + }; + + smd: smdclk { + compatible = "atmel,at91sam9x5-clk-smd"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + ddrck: ddrck { + #clock-cells = <0>; + reg = <2>; + clocks = <&mck>; + }; + + smdck: smdck { + #clock-cells = <0>; + reg = <4>; + clocks = <&smd>; + }; + + uhpck: uhpck { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + udpck: udpck { + #clock-cells = <0>; + reg = <7>; + clocks = <&usb>; + }; + + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + }; + + periphck { + compatible = "atmel,at91sam9x5-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + pioAB_clk: pioAB_clk { + #clock-cells = <0>; + reg = <2>; + }; + + pioCD_clk: pioCD_clk { + #clock-cells = <0>; + reg = <3>; + }; + + smd_clk: smd_clk { + #clock-cells = <0>; + reg = <4>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <5>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <6>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <7>; + }; + + twi0_clk: twi0_clk { + reg = <9>; + #clock-cells = <0>; + }; + + twi1_clk: twi1_clk { + #clock-cells = <0>; + reg = <10>; + }; + + twi2_clk: twi2_clk { + #clock-cells = <0>; + reg = <11>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <12>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <13>; + }; + + spi1_clk: spi1_clk { + #clock-cells = <0>; + reg = <14>; + }; + + uart0_clk: uart0_clk { + #clock-cells = <0>; + reg = <15>; + }; + + uart1_clk: uart1_clk { + #clock-cells = <0>; + reg = <16>; + }; + + tcb0_clk: tcb0_clk { + #clock-cells = <0>; + reg = <17>; + }; + + pwm_clk: pwm_clk { + #clock-cells = <0>; + reg = <18>; + }; + + adc_clk: adc_clk { + #clock-cells = <0>; + reg = <19>; + }; + + dma0_clk: dma0_clk { + #clock-cells = <0>; + reg = <20>; + }; + + dma1_clk: dma1_clk { + #clock-cells = <0>; + reg = <21>; + }; + + uhphs_clk: uhphs_clk { + #clock-cells = <0>; + reg = <22>; + }; + + udphs_clk: udphs_clk { + #clock-cells = <0>; + reg = <23>; + }; + + mci1_clk: mci1_clk { + #clock-cells = <0>; + reg = <26>; + }; + + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <28>; + }; + }; }; rstc@fffffe00 { compatible = "atmel,at91sam9g45-rstc"; reg = <0xfffffe00 0x10>; + clocks = <&clk32k>; }; shdwc@fffffe10 { compatible = "atmel,at91sam9x5-shdwc"; reg = <0xfffffe10 0x10>; + clocks = <&clk32k>; }; pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&mck>; + }; + + sckc@fffffe50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffe50 0x4>; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + clocks = <&slow_xtal>; + }; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc>, <&slow_osc>; + }; }; tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; - interrupts = <17 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; - interrupts = <17 4 0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; }; dma0: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <20 4 0>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; + clocks = <&dma0_clk>; + clock-names = "dma_clk"; }; dma1: dma-controller@ffffee00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffee00 0x200>; - interrupts = <21 4 0>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; + clocks = <&dma1_clk>; + clock-names = "dma_clk"; }; pinctrl@fffff400 { @@ -128,351 +460,434 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <0 9 0x1 0x0 /* PA9 periph A */ - 0 10 0x1 0x1>; /* PA10 periph A with pullup */ + ; /* PA10 periph A with pullup */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = - <0 0 0x1 0x1 /* PA0 periph A with pullup */ - 0 1 0x1 0x0>; /* PA1 periph A */ + ; /* PA1 periph A */ }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = - <0 2 0x1 0x0>; /* PA2 periph A */ + ; /* PA2 periph A */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = - <0 3 0x1 0x0>; /* PA3 periph A */ + ; /* PA3 periph A */ }; pinctrl_usart0_sck: usart0_sck-0 { atmel,pins = - <0 4 0x1 0x0>; /* PA4 periph A */ + ; /* PA4 periph A */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = - <0 5 0x1 0x1 /* PA5 periph A with pullup */ - 0 6 0x1 0x0>; /* PA6 periph A */ + ; /* PA6 periph A */ }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = - <2 27 0x3 0x0>; /* PC27 periph C */ + ; /* PC27 periph C */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = - <2 28 0x3 0x0>; /* PC28 periph C */ + ; /* PC28 periph C */ }; pinctrl_usart1_sck: usart1_sck-0 { atmel,pins = - <2 28 0x3 0x0>; /* PC29 periph C */ + ; /* PC29 periph C */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = - <0 7 0x1 0x1 /* PA7 periph A with pullup */ - 0 8 0x1 0x0>; /* PA8 periph A */ + ; /* PA8 periph A */ }; - pinctrl_uart2_rts: uart2_rts-0 { + pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = - <1 0 0x2 0x0>; /* PB0 periph B */ + ; /* PB0 periph B */ }; - pinctrl_uart2_cts: uart2_cts-0 { + pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = - <1 1 0x2 0x0>; /* PB1 periph B */ + ; /* PB1 periph B */ }; pinctrl_usart2_sck: usart2_sck-0 { atmel,pins = - <1 2 0x2 0x0>; /* PB2 periph B */ - }; - }; - - usart3 { - pinctrl_usart3: usart3-0 { - atmel,pins = - <2 22 0x2 0x1 /* PC22 periph B with pullup */ - 2 23 0x2 0x0>; /* PC23 periph B */ - }; - - pinctrl_usart3_rts: usart3_rts-0 { - atmel,pins = - <2 24 0x2 0x0>; /* PC24 periph B */ - }; - - pinctrl_usart3_cts: usart3_cts-0 { - atmel,pins = - <2 25 0x2 0x0>; /* PC25 periph B */ - }; - - pinctrl_usart3_sck: usart3_sck-0 { - atmel,pins = - <2 26 0x2 0x0>; /* PC26 periph B */ + ; /* PB2 periph B */ }; }; uart0 { pinctrl_uart0: uart0-0 { atmel,pins = - <2 8 0x3 0x0 /* PC8 periph C */ - 2 9 0x3 0x1>; /* PC9 periph C with pullup */ + ; /* PC9 periph C with pullup */ }; }; uart1 { pinctrl_uart1: uart1-0 { atmel,pins = - <2 16 0x3 0x0 /* PC16 periph C */ - 2 17 0x3 0x1>; /* PC17 periph C with pullup */ + ; /* PC17 periph C with pullup */ }; }; nand { pinctrl_nand: nand-0 { atmel,pins = - <3 0 0x1 0x0 /* PD0 periph A Read Enable */ - 3 1 0x1 0x0 /* PD1 periph A Write Enable */ - 3 2 0x1 0x0 /* PD2 periph A Address Latch Enable */ - 3 3 0x1 0x0 /* PD3 periph A Command Latch Enable */ - 3 4 0x0 0x1 /* PD4 gpio Chip Enable pin pull_up */ - 3 5 0x0 0x1 /* PD5 gpio RDY/BUSY pin pull_up */ - 3 6 0x1 0x0 /* PD6 periph A Data bit 0 */ - 3 7 0x1 0x0 /* PD7 periph A Data bit 1 */ - 3 8 0x1 0x0 /* PD8 periph A Data bit 2 */ - 3 9 0x1 0x0 /* PD9 periph A Data bit 3 */ - 3 10 0x1 0x0 /* PD10 periph A Data bit 4 */ - 3 11 0x1 0x0 /* PD11 periph A Data bit 5 */ - 3 12 0x1 0x0 /* PD12 periph A Data bit 6 */ - 3 13 0x1 0x0>; /* PD13 periph A Data bit 7 */ + ; /* PD13 periph A Data bit 7 */ }; pinctrl_nand_16bits: nand_16bits-0 { atmel,pins = - <3 14 0x1 0x0 /* PD14 periph A Data bit 8 */ - 3 15 0x1 0x0 /* PD15 periph A Data bit 9 */ - 3 16 0x1 0x0 /* PD16 periph A Data bit 10 */ - 3 17 0x1 0x0 /* PD17 periph A Data bit 11 */ - 3 18 0x1 0x0 /* PD18 periph A Data bit 12 */ - 3 19 0x1 0x0 /* PD19 periph A Data bit 13 */ - 3 20 0x1 0x0 /* PD20 periph A Data bit 14 */ - 3 21 0x1 0x0>; /* PD21 periph A Data bit 15 */ - }; - }; - - macb0 { - pinctrl_macb0_rmii: macb0_rmii-0 { - atmel,pins = - <1 0 0x1 0x0 /* PB0 periph A */ - 1 1 0x1 0x0 /* PB1 periph A */ - 1 2 0x1 0x0 /* PB2 periph A */ - 1 3 0x1 0x0 /* PB3 periph A */ - 1 4 0x1 0x0 /* PB4 periph A */ - 1 5 0x1 0x0 /* PB5 periph A */ - 1 6 0x1 0x0 /* PB6 periph A */ - 1 7 0x1 0x0 /* PB7 periph A */ - 1 9 0x1 0x0 /* PB9 periph A */ - 1 10 0x1 0x0>; /* PB10 periph A */ - }; - - pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { - atmel,pins = - <1 8 0x1 0x0 /* PB8 periph A */ - 1 11 0x1 0x0 /* PB11 periph A */ - 1 12 0x1 0x0 /* PB12 periph A */ - 1 13 0x1 0x0 /* PB13 periph A */ - 1 14 0x1 0x0 /* PB14 periph A */ - 1 15 0x1 0x0 /* PB15 periph A */ - 1 16 0x1 0x0 /* PB16 periph A */ - 1 17 0x1 0x0>; /* PB17 periph A */ + ; /* PD21 periph A Data bit 15 */ }; }; mmc0 { pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 17 0x1 0x0 /* PA17 periph A */ - 0 16 0x1 0x1 /* PA16 periph A with pullup */ - 0 15 0x1 0x1>; /* PA15 periph A with pullup */ + ; /* PA15 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = - <0 18 0x1 0x1 /* PA18 periph A with pullup */ - 0 19 0x1 0x1 /* PA19 periph A with pullup */ - 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + ; /* PA20 periph A with pullup */ }; }; mmc1 { pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { atmel,pins = - <0 13 0x2 0x0 /* PA13 periph B */ - 0 12 0x2 0x1 /* PA12 periph B with pullup */ - 0 11 0x2 0x1>; /* PA11 periph B with pullup */ + ; /* PA11 periph B with pullup */ }; pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { atmel,pins = - <0 2 0x2 0x1 /* PA2 periph B with pullup */ - 0 3 0x2 0x1 /* PA3 periph B with pullup */ - 0 4 0x2 0x1>; /* PA4 periph B with pullup */ + ; /* PA4 periph B with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = - <0 24 0x2 0x0 /* PA24 periph B */ - 0 25 0x2 0x0 /* PA25 periph B */ - 0 26 0x2 0x0>; /* PA26 periph B */ + ; /* PA26 periph B */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = - <0 27 0x2 0x0 /* PA27 periph B */ - 0 28 0x2 0x0 /* PA28 periph B */ - 0 29 0x2 0x0>; /* PA29 periph B */ + ; /* PA29 periph B */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = - <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */ - 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */ - 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */ + ; /* PA13 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = - <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */ - 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */ - 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */ + ; /* PA23 periph B SPI1_SPCK pin */ }; }; i2c0 { pinctrl_i2c0: i2c0-0 { atmel,pins = - <0 30 0x1 0x0 /* PA30 periph A I2C0 data */ - 0 31 0x1 0x0>; /* PA31 periph A I2C0 clock */ + ; /* PA31 periph A I2C0 clock */ }; }; i2c1 { pinctrl_i2c1: i2c1-0 { atmel,pins = - <2 0 0x3 0x0 /* PC0 periph C I2C1 data */ - 2 1 0x3 0x0>; /* PC1 periph C I2C1 clock */ + ; /* PC1 periph C I2C1 clock */ }; }; i2c2 { pinctrl_i2c2: i2c2-0 { atmel,pins = - <1 4 0x2 0x0 /* PB4 periph B I2C2 data */ - 1 5 0x2 0x0>; /* PB5 periph B I2C2 clock */ + ; /* PB5 periph B I2C2 clock */ }; }; i2c_gpio0 { pinctrl_i2c_gpio0: i2c_gpio0-0 { atmel,pins = - <0 30 0x0 0x2 /* PA30 gpio multidrive I2C0 data */ - 0 31 0x0 0x2>; /* PA31 gpio multidrive I2C0 clock */ + ; /* PA31 gpio multidrive I2C0 clock */ }; }; i2c_gpio1 { pinctrl_i2c_gpio1: i2c_gpio1-0 { atmel,pins = - <2 0 0x0 0x2 /* PC0 gpio multidrive I2C1 data */ - 2 1 0x0 0x2>; /* PC1 gpio multidrive I2C1 clock */ + ; /* PC1 gpio multidrive I2C1 clock */ }; }; i2c_gpio2 { pinctrl_i2c_gpio2: i2c_gpio2-0 { atmel,pins = - <1 4 0x0 0x2 /* PB4 gpio multidrive I2C2 data */ - 1 5 0x0 0x2>; /* PB5 gpio multidrive I2C2 clock */ + ; /* PB5 gpio multidrive I2C2 clock */ + }; + }; + + pwm0 { + pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 { + atmel,pins = + ; + }; + pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 { + atmel,pins = + ; + }; + pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 { + atmel,pins = + ; + }; + + pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 { + atmel,pins = + ; + }; + pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 { + atmel,pins = + ; + }; + pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 { + atmel,pins = + ; + }; + + pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 { + atmel,pins = + ; + }; + pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 { + atmel,pins = + ; + }; + + pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 { + atmel,pins = + ; + }; + pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 { + atmel,pins = + ; + }; + }; + + tcb0 { + pinctrl_tcb0_tclk0: tcb0_tclk0-0 { + atmel,pins = ; + }; + + pinctrl_tcb0_tclk1: tcb0_tclk1-0 { + atmel,pins = ; + }; + + pinctrl_tcb0_tclk2: tcb0_tclk2-0 { + atmel,pins = ; + }; + + pinctrl_tcb0_tioa0: tcb0_tioa0-0 { + atmel,pins = ; + }; + + pinctrl_tcb0_tioa1: tcb0_tioa1-0 { + atmel,pins = ; + }; + + pinctrl_tcb0_tioa2: tcb0_tioa2-0 { + atmel,pins = ; + }; + + pinctrl_tcb0_tiob0: tcb0_tiob0-0 { + atmel,pins = ; + }; + + pinctrl_tcb0_tiob1: tcb0_tiob1-0 { + atmel,pins = ; + }; + + pinctrl_tcb0_tiob2: tcb0_tiob2-0 { + atmel,pins = ; + }; + }; + + tcb1 { + pinctrl_tcb1_tclk0: tcb1_tclk0-0 { + atmel,pins = ; + }; + + pinctrl_tcb1_tclk1: tcb1_tclk1-0 { + atmel,pins = ; + }; + + pinctrl_tcb1_tclk2: tcb1_tclk2-0 { + atmel,pins = ; + }; + + pinctrl_tcb1_tioa0: tcb1_tioa0-0 { + atmel,pins = ; + }; + + pinctrl_tcb1_tioa1: tcb1_tioa1-0 { + atmel,pins = ; + }; + + pinctrl_tcb1_tioa2: tcb1_tioa2-0 { + atmel,pins = ; + }; + + pinctrl_tcb1_tiob0: tcb1_tiob0-0 { + atmel,pins = ; + }; + + pinctrl_tcb1_tiob1: tcb1_tiob1-0 { + atmel,pins = ; + }; + + pinctrl_tcb1_tiob2: tcb1_tiob2-0 { + atmel,pins = ; }; }; pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioAB_clk>; }; pioB: gpio@fffff600 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; - interrupts = <2 4 1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; #gpio-lines = <19>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioAB_clk>; }; pioC: gpio@fffff800 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioCD_clk>; }; pioD: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; - interrupts = <3 4 1>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; #gpio-lines = <22>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioCD_clk>; }; }; ssc0: ssc@f0010000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0010000 0x4000>; - interrupts = <28 4 5>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>, + <&dma0 1 AT91_DMA_CFG_PER_ID(14)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; status = "disabled"; }; mmc0: mmc@f0008000 { compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; - interrupts = <12 4 0>; - dmas = <&dma0 1 0>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; + pinctrl-names = "default"; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -481,144 +896,181 @@ mmc1: mmc@f000c000 { compatible = "atmel,hsmci"; reg = <0xf000c000 0x600>; - interrupts = <26 4 0>; - dmas = <&dma1 1 0>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; + pinctrl-names = "default"; + clocks = <&mci1_clk>; + clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; dbgu: serial@fffff200 { - compatible = "atmel,at91sam9260-usart"; + compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>, + <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; + clocks = <&mck>; + clock-names = "usart"; status = "disabled"; }; usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x200>; - interrupts = <5 4 5>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>, + <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; + clocks = <&usart0_clk>; + clock-names = "usart"; status = "disabled"; }; usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x200>; - interrupts = <6 4 5>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>, + <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; + clocks = <&usart1_clk>; + clock-names = "usart"; status = "disabled"; }; usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x200>; - interrupts = <7 4 5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; - status = "disabled"; - }; - - macb0: ethernet@f802c000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; - reg = <0xf802c000 0x100>; - interrupts = <24 4 3>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_macb0_rmii>; - status = "disabled"; - }; - - macb1: ethernet@f8030000 { - compatible = "cdns,at32ap7000-macb", "cdns,macb"; - reg = <0xf8030000 0x100>; - interrupts = <27 4 3>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>, + <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; + clocks = <&usart2_clk>; + clock-names = "usart"; status = "disabled"; }; i2c0: i2c@f8010000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8010000 0x100>; - interrupts = <9 4 6>; - dmas = <&dma0 1 7>, - <&dma0 1 8>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>, + <&dma0 1 AT91_DMA_CFG_PER_ID(8)>; dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&twi0_clk>; status = "disabled"; }; i2c1: i2c@f8014000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8014000 0x100>; - interrupts = <10 4 6>; - dmas = <&dma1 1 5>, - <&dma1 1 6>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>, + <&dma1 1 AT91_DMA_CFG_PER_ID(6)>; dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&twi1_clk>; status = "disabled"; }; i2c2: i2c@f8018000 { compatible = "atmel,at91sam9x5-i2c"; reg = <0xf8018000 0x100>; - interrupts = <11 4 6>; - dmas = <&dma0 1 9>, - <&dma0 1 10>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>, + <&dma0 1 AT91_DMA_CFG_PER_ID(10)>; dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; + clocks = <&twi2_clk>; + status = "disabled"; + }; + + uart0: serial@f8040000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8040000 0x200>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&uart0_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + uart1: serial@f8044000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8044000 0x200>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + clocks = <&uart1_clk>; + clock-names = "usart"; status = "disabled"; }; adc0: adc@f804c000 { - compatible = "atmel,at91sam9260-adc"; + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9x5-adc"; reg = <0xf804c000 0x100>; - interrupts = <19 4 0>; - atmel,adc-use-external; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&adc_clk>, + <&adc_op_clk>; + clock-names = "adc_clk", "adc_op_clk"; + atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xffff>; atmel,adc-vref = <3300>; - atmel,adc-num-channels = <12>; atmel,adc-startup-time = <40>; - atmel,adc-channel-base = <0x50>; - atmel,adc-drdy-mask = <0x1000000>; - atmel,adc-status-register = <0x30>; - atmel,adc-trigger-register = <0xc0>; + atmel,adc-sample-hold-time = <11>; atmel,adc-res = <8 10>; atmel,adc-res-names = "lowres", "highres"; atmel,adc-use-res = "highres"; trigger@0 { + reg = <0>; trigger-name = "external-rising"; trigger-value = <0x1>; trigger-external; }; trigger@1 { + reg = <1>; trigger-name = "external-falling"; trigger-value = <0x2>; trigger-external; }; trigger@2 { + reg = <2>; trigger-name = "external-any"; trigger-value = <0x3>; trigger-external; }; trigger@3 { + reg = <3>; trigger-name = "continuous"; trigger-value = <0x6>; }; @@ -629,9 +1081,14 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0000000 0x100>; - interrupts = <13 4 3>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>, + <&dma0 1 AT91_DMA_CFG_PER_ID(2)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -640,16 +1097,106 @@ #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xf0004000 0x100>; - interrupts = <14 4 3>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>, + <&dma1 1 AT91_DMA_CFG_PER_ID(2)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + + usb2: gadget@f803c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9g45-udc"; + reg = <0x00500000 0x80000 + 0xf803c000 0x400>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&utmi>, <&udphs_clk>; + clock-names = "hclk", "pclk"; + status = "disabled"; + + ep0 { + reg = <0>; + atmel,fifo-size = <64>; + atmel,nb-banks = <1>; + }; + + ep1 { + reg = <1>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep2 { + reg = <2>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep3 { + reg = <3>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep4 { + reg = <4>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep5 { + reg = <5>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep6 { + reg = <6>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + }; + + watchdog@fffffe40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffe40 0x10>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; + atmel,watchdog-type = "hardware"; + atmel,reset-type = "all"; + atmel,dbg-halt; status = "disabled"; }; rtc@fffffeb0 { compatible = "atmel,at91sam9x5-rtc"; reg = <0xfffffeb0 0x40>; - interrupts = <1 4 7>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; + status = "disabled"; + }; + + pwm0: pwm@f8034000 { + compatible = "atmel,at91sam9rl-pwm"; + reg = <0xf8034000 0x300>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; + clocks = <&pwm_clk>; + #pwm-cells = <3>; status = "disabled"; }; }; @@ -666,10 +1213,11 @@ atmel,pmecc-lookup-table-offset = <0x0 0x8000>; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + atmel,nand-has-dma; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - gpios = <&pioD 5 0 - &pioD 4 0 + gpios = <&pioD 5 GPIO_ACTIVE_HIGH + &pioD 4 GPIO_ACTIVE_HIGH 0 >; status = "disabled"; @@ -678,22 +1226,26 @@ usb0: ohci@00600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; usb1: ehci@00700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; - interrupts = <22 4 2>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&utmi>, <&uhphs_clk>; + clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; }; i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 30 0 /* sda */ - &pioA 31 0 /* scl */ + gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ + &pioA 31 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; @@ -707,8 +1259,8 @@ i2c@1 { compatible = "i2c-gpio"; - gpios = <&pioC 0 0 /* sda */ - &pioC 1 0 /* scl */ + gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */ + &pioC 1 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; @@ -722,8 +1274,8 @@ i2c@2 { compatible = "i2c-gpio"; - gpios = <&pioB 4 0 /* sda */ - &pioB 5 0 /* scl */ + gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ + &pioB 5 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain;