--- zzzz-none-000/linux-3.10.107/arch/arm/boot/dts/exynos4210-origen.dts 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/arch/arm/boot/dts/exynos4210-origen.dts 2021-02-04 17:41:59.000000000 +0000 @@ -15,11 +15,13 @@ */ /dts-v1/; -/include/ "exynos4210.dtsi" +#include "exynos4210.dtsi" +#include +#include / { model = "Insignal Origen evaluation board based on Exynos4210"; - compatible = "insignal,origen", "samsung,exynos4210"; + compatible = "insignal,origen", "samsung,exynos4210", "samsung,exynos4"; memory { reg = <0x40000000 0x10000000 @@ -30,57 +32,23 @@ chosen { bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; + stdout-path = &serial_2; }; - mmc_reg: voltage-regulator { - compatible = "regulator-fixed"; - regulator-name = "VMEM_VDD_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 0>; - enable-active-high; - }; - - sdhci@12530000 { - bus-width = <4>; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; - pinctrl-names = "default"; - vmmc-supply = <&mmc_reg>; - status = "okay"; - }; - - sdhci@12510000 { - bus-width = <4>; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>; - pinctrl-names = "default"; - vmmc-supply = <&mmc_reg>; - status = "okay"; - }; - - g2d@12800000 { - status = "okay"; - }; - - codec@13400000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - status = "okay"; - }; - - serial@13800000 { - status = "okay"; - }; - - serial@13810000 { - status = "okay"; - }; - - serial@13820000 { - status = "okay"; - }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; - serial@13830000 { - status = "okay"; + mmc_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; gpio_keys { @@ -90,36 +58,36 @@ up { label = "Up"; - gpios = <&gpx2 0 1>; - linux,code = <103>; + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; + linux,code = ; gpio-key,wakeup; }; down { label = "Down"; - gpios = <&gpx2 1 1>; - linux,code = <108>; + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; + linux,code = ; gpio-key,wakeup; }; back { label = "Back"; - gpios = <&gpx1 7 1>; - linux,code = <158>; + gpios = <&gpx1 7 GPIO_ACTIVE_LOW>; + linux,code = ; gpio-key,wakeup; }; home { label = "Home"; - gpios = <&gpx1 6 1>; - linux,code = <102>; + gpios = <&gpx1 6 GPIO_ACTIVE_LOW>; + linux,code = ; gpio-key,wakeup; }; menu { label = "Menu"; - gpios = <&gpx1 5 1>; - linux,code = <139>; + gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; + linux,code = ; gpio-key,wakeup; }; }; @@ -127,7 +95,7 @@ leds { compatible = "gpio-leds"; status { - gpios = <&gpx1 3 1>; + gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; }; @@ -143,4 +111,232 @@ clock-frequency = <24000000>; }; }; + + display-timings { + native-mode = <&timing0>; + timing0: timing { + clock-frequency = <47500000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <64>; + hback-porch = <16>; + hsync-len = <48>; + vback-porch = <64>; + vfront-porch = <16>; + vsync-len = <3>; + }; + }; +}; + +&cpu0 { + cpu0-supply = <&buck1_reg>; +}; + +&fimd { + pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&g2d { + status = "okay"; +}; + +&i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + + max8997_pmic@66 { + compatible = "maxim,max8997-pmic"; + reg = <0x66>; + interrupt-parent = <&gpx0>; + interrupts = <4 0>, <3 0>; + + max8997,pmic-buck1-dvs-voltage = <1350000>; + max8997,pmic-buck2-dvs-voltage = <1100000>; + max8997,pmic-buck5-dvs-voltage = <1200000>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VMIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDD_RTC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD_AUD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo9_reg: LDO9 { + regulator-name = "DVDD_SWB_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD_PLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD_AUD_3V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "AVDD18_SWB_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "VDD_SWB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "VDD_MIF_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + /* + * HACK: The real name is VDD_ARM_1.2V, + * but exynos-cpufreq does not support + * DT-based regulator lookup yet. + */ + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "VDD_INT_1.1V"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "VDD_G3D_1.1V"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDDQ_M1M2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "VDD_LCD_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + status = "okay"; +}; + +&sdhci_0 { + bus-width = <4>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>; + pinctrl-names = "default"; + vmmc-supply = <&mmc_reg>; + status = "okay"; +}; + +&sdhci_2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; + pinctrl-names = "default"; + vmmc-supply = <&mmc_reg>; + status = "okay"; +}; + +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&tmu { + status = "okay"; +}; + +&watchdog { + status = "okay"; };