--- zzzz-none-000/linux-3.10.107/arch/arm/boot/dts/imx23-olinuxino.dts	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/boot/dts/imx23-olinuxino.dts	2021-02-04 17:41:59.000000000 +0000
@@ -12,7 +12,8 @@
  */
 
 /dts-v1/;
-/include/ "imx23.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include "imx23.dtsi"
 
 / {
 	model = "i.MX23 Olinuxino Low Cost Board";
@@ -40,21 +41,21 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
+						MX23_PAD_GPMI_ALE__GPIO_0_17
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
 				led_pin_gpio2_1: led_gpio2_1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+						MX23_PAD_SSP1_DETECT__GPIO_2_1
 					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 			};
 
@@ -69,6 +70,16 @@
 		};
 
 		apbx@80040000 {
+			lradc@80050000 {
+				status = "okay";
+			};
+
+			i2c: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c_pins_b>;
+				status = "okay";
+			};
+
 			duart: serial@80070000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&duart_pins_a>;
@@ -97,9 +108,12 @@
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_usb0_vbus: usb0_vbus {
+		reg_usb0_vbus: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "usb0_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -116,7 +130,7 @@
 
 		user {
 			label = "green";
-			gpios = <&gpio2 1 1>;
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };