--- zzzz-none-000/linux-3.10.107/arch/arm/boot/dts/kirkwood-cloudbox.dts	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/boot/dts/kirkwood-cloudbox.dts	2021-02-04 17:41:59.000000000 +0000
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "LaCie CloudBox";
@@ -14,14 +14,11 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
-			pinctrl-0 = < &pmx_spi &pmx_uart0
-					&pmx_cloudbox_sata0 >;
-			pinctrl-names = "default";
-
+		pinctrl: pin-controller@10000 {
 			pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
 				marvell,pins = "mpp15";
 				marvell,function = "sata0";
@@ -29,11 +26,12 @@
 		};
 
 		serial@12000 {
-			clock-frequency = <166666667>;
 			status = "okay";
 		};
 
 		sata@80000 {
+			pinctrl-0 = <&pmx_cloudbox_sata0>;
+			pinctrl-names = "default";
 			status = "okay";
 			nr-ports = <1>;
 		};
@@ -44,7 +42,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "mx25l4005a";
+				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <20000000>;
 				mode = <0>;
@@ -64,8 +62,8 @@
 
 		button@1 {
 			label = "Power push button";
-			linux,code = <116>;
-			gpios = <&gpio0 16 1>;
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -74,16 +72,31 @@
 
 		red-fail {
 			label = "cloudbox:red:fail";
-			gpios = <&gpio0 14 0>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 		};
 		blue-sata {
 			label = "cloudbox:blue:sata";
-			gpios = <&gpio0 15 0>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
 	gpio_poweroff {
 		compatible = "gpio-poweroff";
-		gpios = <&gpio0 17 0>;
+		gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
 	};
 };