--- zzzz-none-000/linux-3.10.107/arch/arm/boot/dts/kirkwood-ib62x0.dts	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/boot/dts/kirkwood-ib62x0.dts	2021-02-04 17:41:59.000000000 +0000
@@ -1,11 +1,11 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
-	compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0",  "marvell,kirkwood-88f6281", "marvell,kirkwood";
+	compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
 	memory {
 		device_type = "memory";
@@ -14,17 +14,11 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
-
-			pinctrl-0 = < &pmx_nand
-				      &pmx_led_os_red &pmx_power_off
-				      &pmx_led_os_green &pmx_led_usb_transfer
-				      &pmx_button_reset &pmx_button_usb_copy >;
-			pinctrl-names = "default";
-
+		pinctrl: pin-controller@10000 {
 			pmx_led_os_red: pmx-led-os-red {
 				marvell,pins = "mpp22";
 				marvell,function = "gpio";
@@ -50,6 +44,7 @@
 				marvell,function = "gpio";
 			};
 		};
+
 		serial@12000 {
 			status = "okay";
 		};
@@ -58,64 +53,93 @@
 			status = "okay";
 			nr-ports = <2>;
 		};
-
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0000000 0x100000>;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x0100000 0x600000>;
-			};
-
-			partition@700000 {
-				label = "root";
-				reg = <0x0700000 0xf900000>;
-			};
-
-		};
 	};
 
 	gpio_keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>;
+		pinctrl-names = "default";
+
 		button@1 {
 			label = "USB Copy";
-			linux,code = <133>;
-			gpios = <&gpio0 29 1>;
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 		};
 		button@2 {
 			label = "Reset";
-			linux,code = <0x198>;
-			gpios = <&gpio0 28 1>;
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
 		};
 	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green
+			     &pmx_led_usb_transfer>;
+		pinctrl-names = "default";
 
 		green-os {
 			label = "ib62x0:green:os";
-			gpios = <&gpio0 25 0>;
-			linux,default-trigger = "default-on";
+			gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
 		};
 		red-os {
 			label = "ib62x0:red:os";
-			gpios = <&gpio0 22 0>;
+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
 		};
 		usb-copy {
 			label = "ib62x0:red:usb_copy";
-			gpios = <&gpio0 27 0>;
+			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
 	gpio_poweroff {
 		compatible = "gpio-poweroff";
-		gpios = <&gpio0 24 0>;
+		pinctrl-0 = <&pmx_power_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
 	};
+};
 
+&nand {
+	status = "okay";
 
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0xe0000>;
+	};
+
+	partition@e0000 {
+		label = "u-boot environment";
+		reg = <0xe0000 0x20000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x600000>;
+	};
+
+	partition@700000 {
+		label = "root";
+		reg = <0x0700000 0xf900000>;
+	};
+
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
 };