--- zzzz-none-000/linux-3.10.107/arch/arm/boot/dts/kirkwood-iconnect.dts	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/boot/dts/kirkwood-iconnect.dts	2021-02-04 17:41:59.000000000 +0000
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "Iomega Iconnect";
@@ -14,57 +14,60 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
 		linux,initrd-start = <0x4500040>;
 		linux,initrd-end   = <0x4800000>;
 	};
 
-	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
+	mbus {
+		pcie-controller {
+			status = "okay";
 
-			pinctrl-0 = < &pmx_gpio_12 &pmx_gpio_35
-				      &pmx_gpio_41 &pmx_gpio_42
-				      &pmx_gpio_43 &pmx_gpio_44
-				      &pmx_gpio_45 &pmx_gpio_46
-				      &pmx_gpio_47 &pmx_gpio_48 >;
-			pinctrl-names = "default";
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
 
-			pmx_gpio_12: pmx-gpio-12 {
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_button_reset: pmx-button-reset {
 				marvell,pins = "mpp12";
 				marvell,function = "gpio";
 			};
-			pmx_gpio_35: pmx-gpio-35 {
+			pmx_button_otb: pmx-button-otb {
 				marvell,pins = "mpp35";
 				marvell,function = "gpio";
 			};
-			pmx_gpio_41: pmx-gpio-41 {
+			pmx_led_level: pmx-led-level {
 				marvell,pins = "mpp41";
 				marvell,function = "gpio";
 			};
-			pmx_gpio_42: pmx-gpio-42 {
+			pmx_led_power_blue: pmx-led-power-blue {
 				marvell,pins = "mpp42";
 				marvell,function = "gpio";
 			};
-			pmx_gpio_43: pmx-gpio-43 {
+			pmx_led_power_red: pmx-power-red {
 				marvell,pins = "mpp43";
 				marvell,function = "gpio";
 			};
-			pmx_gpio_44: pmx-gpio-44 {
+			pmx_led_usb1: pmx-led-usb1 {
 				marvell,pins = "mpp44";
 				marvell,function = "gpio";
 			};
-			pmx_gpio_45: pmx-gpio-45 {
+			pmx_led_usb2: pmx-led-usb2 {
 				marvell,pins = "mpp45";
 				marvell,function = "gpio";
 			};
-			pmx_gpio_46: pmx-gpio-46 {
+			pmx_led_usb3: pmx-led-usb3 {
 				marvell,pins = "mpp46";
 				marvell,function = "gpio";
 			};
-			pmx_gpio_47: pmx-gpio-47 {
+			pmx_led_usb4: pmx-led-usb4 {
 				marvell,pins = "mpp47";
 				marvell,function = "gpio";
 			};
-			pmx_gpio_48: pmx-gpio-48 {
+			pmx_led_otb: pmx-led-otb {
 				marvell,pins = "mpp48";
 				marvell,function = "gpio";
 			};
@@ -80,73 +83,49 @@
 		serial@12000 {
 			status = "ok";
 		};
-
-		nand@3000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x0000000 0xc0000>;
-			};
-
-			partition@a0000 {
-				label = "env";
-				reg = <0xa0000 0x20000>;
-			};
-
-			partition@100000 {
-				label = "zImage";
-				reg = <0x100000 0x300000>;
-			};
-
-			partition@540000 {
-				label = "initrd";
-				reg = <0x540000 0x300000>;
-			};
-
-			partition@980000 {
-				label = "boot";
-				reg = <0x980000 0x1f400000>;
-			};
-		};
 	};
 
 	gpio-leds {
 		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_level &pmx_led_power_blue
+			      &pmx_led_power_red &pmx_led_usb1
+			      &pmx_led_usb2 &pmx_led_usb3
+			      &pmx_led_usb4 &pmx_led_otb >;
+		pinctrl-names = "default";
 
 		led-level {
 			label = "led_level";
-			gpios = <&gpio1 9 0>;
-			linux,default-trigger = "default-on";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
 		};
 		power-blue {
 			label = "power:blue";
-			gpios = <&gpio1 10 0>;
-			linux,default-trigger = "timer";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
 		};
 		power-red {
 			label = "power:red";
-			gpios = <&gpio1 11 0>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 		};
 		usb1 {
 			label = "usb1:blue";
-			gpios = <&gpio1 12 0>;
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 		};
 		usb2 {
 			label = "usb2:blue";
-			gpios = <&gpio1 13 0>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		};
 		usb3 {
 			label = "usb3:blue";
-			gpios = <&gpio1 14 0>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 		};
 		usb4 {
 			label = "usb4:blue";
-			gpios = <&gpio1 15 0>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		};
 		otb {
 			label = "otb:blue";
-			gpios = <&gpio1 16 0>;
+			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -154,17 +133,64 @@
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
+		pinctrl-names = "default";
+
 		button@1 {
 			label = "OTB Button";
-			linux,code = <133>;
-			gpios = <&gpio1 3 1>;
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
 		button@2 {
 			label = "Reset";
-			linux,code = <0x198>;
-			gpios = <&gpio0 12 1>;
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
 	};
 };
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0xc0000>;
+	};
+
+	partition@a0000 {
+		label = "env";
+		reg = <0xa0000 0x20000>;
+	};
+
+	partition@100000 {
+		label = "zImage";
+		reg = <0x100000 0x300000>;
+	};
+
+	partition@540000 {
+		label = "initrd";
+		reg = <0x540000 0x300000>;
+	};
+
+	partition@980000 {
+		label = "boot";
+		reg = <0x980000 0x1f400000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@11 {
+		reg = <11>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};