--- zzzz-none-000/linux-3.10.107/arch/arm/boot/dts/kirkwood-lsxl.dtsi	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/boot/dts/kirkwood-lsxl.dtsi	2021-02-04 17:41:59.000000000 +0000
@@ -1,23 +1,14 @@
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
 	};
 
 	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
-
-			pinctrl-0 = < &pmx_power_hdd &pmx_usb_vbus
-				      &pmx_fan_low &pmx_fan_high
-				      &pmx_led_function_red &pmx_led_alarm
-				      &pmx_led_info &pmx_led_power
-				      &pmx_fan_lock &pmx_button_function
-				      &pmx_power_switch &pmx_power_auto_switch
-				      &pmx_led_function_blue >;
-			pinctrl-names = "default";
-
+		pinctrl: pin-controller@10000 {
 			pmx_power_hdd: pmx-power-hdd {
 				marvell,pins = "mpp10";
 				marvell,function = "gpo";
@@ -83,7 +74,7 @@
 			m25p40@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "m25p40";
+				compatible = "m25p40", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <25000000>;
 				mode = <0>;
@@ -112,70 +103,86 @@
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_function &pmx_power_switch
+			     &pmx_power_auto_switch>;
+		pinctrl-names = "default";
+
 		button@1 {
 			label = "Function Button";
-			linux,code = <357>;
-			gpios = <&gpio1 9 1>;
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 		};
 		button@2 {
 			label = "Power-on Switch";
-			linux,code = <0>;
+			linux,code = <KEY_RESERVED>;
 			linux,input-type = <5>;
-			gpios = <&gpio1 10 1>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 		};
 		button@3 {
 			label = "Power-auto Switch";
-			linux,code = <1>;
+			linux,code = <KEY_ESC>;
 			linux,input-type = <5>;
-			gpios = <&gpio1 11 1>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
 	};
 
 	gpio_leds {
 		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue>;
+		pinctrl-names = "default";
 
 		led@1 {
 			label = "lsxl:blue:func";
-			gpios = <&gpio1 4 1>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 		};
 
 		led@2 {
 			label = "lsxl:red:alarm";
-			gpios = <&gpio1 5 1>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		};
 
 		led@3 {
 			label = "lsxl:amber:info";
-			gpios = <&gpio1 6 1>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		};
 
 		led@4 {
 			label = "lsxl:blue:power";
-			gpios = <&gpio1 7 1>;
-			linux,default-trigger = "default-on";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
 		};
 
 		led@5 {
 			label = "lsxl:red:func";
-			gpios = <&gpio1 16 1>;
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 		};
 	};
 
 	gpio_fan {
 		compatible = "gpio-fan";
-		gpios = <&gpio0 19 1
-		         &gpio0 18 1>;
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 19 GPIO_ACTIVE_LOW
+		         &gpio0 18 GPIO_ACTIVE_LOW>;
 		gpio-fan,speed-map = <0    3
 		                      1500 2
 		                      3250 1
 		                      5000 0>;
-		alarm-gpios = <&gpio1 8 0>;
+		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
 	};
 
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_hdd &pmx_usb_vbus>;
+		pinctrl-names = "default";
 
 		usb_power: regulator@1 {
 			compatible = "regulator-fixed";
@@ -201,3 +208,29 @@
 		};
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};