--- zzzz-none-000/linux-3.10.107/arch/arm/boot/dts/kirkwood-openblocks_a6.dts	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/boot/dts/kirkwood-openblocks_a6.dts	2021-02-04 17:41:59.000000000 +0000
@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6282.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
 
 / {
 	model = "Plat'Home OpenBlocksA6";
@@ -14,50 +14,16 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
 	};
 
 	ocp@f1000000 {
 		serial@12000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		serial@12100 {
-			status = "ok";
-		};
-
-		nand@3000000 {
-			chip-delay = <25>;
 			status = "okay";
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x0 0x90000>;
-			};
-
-			partition@90000 {
-				label = "env";
-				reg = <0x90000 0x44000>;
-			};
-
-			partition@d4000 {
-				label = "test";
-				reg = <0xd4000 0x24000>;
-			};
-
-			partition@f4000 {
-				label = "conf";
-				reg = <0xf4000 0x400000>;
-			};
-
-			partition@4f4000 {
-				label = "linux";
-				reg = <0x4f4000 0x1d20000>;
-			};
-
-			partition@2214000 {
-				label = "user";
-				reg = <0x2214000 0x1dec000>;
-			};
 		};
 
 		sata@80000 {
@@ -69,22 +35,13 @@
 			status = "okay";
 
 			s35390a: s35390a@30 {
-				compatible = "s35390a";
+				compatible = "sii,s35390a";
 				reg = <0x30>;
 			};
 		};
 
-		pinctrl: pinctrl@10000 {
-			pinctrl-0 = < &pmx_nand &pmx_uart0
-				&pmx_uart1 &pmx_twsi1
-				&pmx_dip_sw0 &pmx_dip_sw1
-				&pmx_dip_sw2 &pmx_dip_sw3
-				&pmx_gpio_0 &pmx_gpio_1
-				&pmx_gpio_2 &pmx_gpio_3
-				&pmx_gpio_4 &pmx_gpio_5
-				&pmx_gpio_6 &pmx_gpio_7
-				&pmx_led_red &pmx_led_green
-				&pmx_led_yellow >;
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
 			pinctrl-names = "default";
 
 			pmx_uart0: pmx-uart0 {
@@ -104,63 +61,14 @@
 				marvell,function = "sysrst";
 			};
 
-			pmx_dip_sw0: pmx-dip-sw0 {
-				marvell,pins = "mpp20";
-				marvell,function = "gpio";
-			};
-
-			pmx_dip_sw1: pmx-dip-sw1 {
-				marvell,pins = "mpp21";
-				marvell,function = "gpio";
-			};
-
-			pmx_dip_sw2: pmx-dip-sw2 {
-				marvell,pins = "mpp22";
-				marvell,function = "gpio";
-			};
-
-			pmx_dip_sw3: pmx-dip-sw3 {
-				marvell,pins = "mpp23";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_0: pmx-gpio-0 {
-				marvell,pins = "mpp24";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_1: pmx-gpio-1 {
-				marvell,pins = "mpp25";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_2: pmx-gpio-2 {
-				marvell,pins = "mpp26";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_3: pmx-gpio-3 {
-				marvell,pins = "mpp27";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_4: pmx-gpio-4 {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_5: pmx-gpio-5 {
-				marvell,pins = "mpp29";
+			pmx_dip_switches: pmx-dip-switches {
+				marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23";
 				marvell,function = "gpio";
 			};
 
-			pmx_gpio_6: pmx-gpio-6 {
-				marvell,pins = "mpp30";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_7: pmx-gpio-7 {
-				marvell,pins = "mpp31";
+			pmx_gpio_header: pmx-gpio-header {
+				marvell,pins = "mpp24", "mpp25", "mpp26", "mpp27",
+					       "mpp28", "mpp29", "mpp30", "mpp31";
 				marvell,function = "gpio";
 			};
 
@@ -174,18 +82,8 @@
 				marvell,function = "gpio";
 			};
 
-			pmx_led_red: pmx-led-red {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_green: pmx-led-green {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_yellow: pmx-led-yellow {
-				marvell,pins = "mpp43";
+			pmx_leds: pmx-leds {
+				marvell,pins = "mpp41", "mpp42", "mpp43";
 				marvell,function = "gpio";
 			};
 		};
@@ -193,20 +91,86 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
 
 		led-red {
 			label = "obsa6:red:stat";
-			gpios = <&gpio1 9 1>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 		};
 
 		led-green {
 			label = "obsa6:green:stat";
-			gpios = <&gpio1 10 1>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 		};
 
 		led-yellow {
 			label = "obsa6:yellow:stat";
-			gpios = <&gpio1 11 1>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
         };
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_gpio_init>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			label = "Init Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	chip-delay = <25>;
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x90000>;
+	};
+
+	partition@90000 {
+		label = "env";
+		reg = <0x90000 0x44000>;
+	};
+
+	partition@d4000 {
+		label = "test";
+		reg = <0xd4000 0x24000>;
+	};
+
+	partition@f4000 {
+		label = "conf";
+		reg = <0xf4000 0x400000>;
+	};
+
+	partition@4f4000 {
+		label = "linux";
+		reg = <0x4f4000 0x1d20000>;
+	};
+
+	partition@2214000 {
+		label = "user";
+		reg = <0x2214000 0x1dec000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
 };