--- zzzz-none-000/linux-3.10.107/arch/arm/boot/dts/pxa168.dtsi 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/arch/arm/boot/dts/pxa168.dtsi 2021-02-04 17:41:59.000000000 +0000 @@ -7,7 +7,8 @@ * publishhed by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include / { aliases { @@ -59,6 +60,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4017000 0x1000>; interrupts = <27>; + clocks = <&soc_clocks PXA168_CLK_UART0>; + resets = <&soc_clocks PXA168_CLK_UART0>; status = "disabled"; }; @@ -66,6 +69,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4018000 0x1000>; interrupts = <28>; + clocks = <&soc_clocks PXA168_CLK_UART1>; + resets = <&soc_clocks PXA168_CLK_UART1>; status = "disabled"; }; @@ -73,6 +78,8 @@ compatible = "mrvl,mmp-uart"; reg = <0xd4026000 0x1000>; interrupts = <29>; + clocks = <&soc_clocks PXA168_CLK_UART2>; + resets = <&soc_clocks PXA168_CLK_UART2>; status = "disabled"; }; @@ -84,6 +91,8 @@ gpio-controller; #gpio-cells = <2>; interrupts = <49>; + clocks = <&soc_clocks PXA168_CLK_GPIO>; + resets = <&soc_clocks PXA168_CLK_GPIO>; interrupt-names = "gpio_mux"; interrupt-controller; #interrupt-cells = <1>; @@ -110,6 +119,8 @@ compatible = "mrvl,mmp-twsi"; reg = <0xd4011000 0x1000>; interrupts = <7>; + clocks = <&soc_clocks PXA168_CLK_TWSI0>; + resets = <&soc_clocks PXA168_CLK_TWSI0>; mrvl,i2c-fast-mode; status = "disabled"; }; @@ -118,6 +129,8 @@ compatible = "mrvl,mmp-twsi"; reg = <0xd4025000 0x1000>; interrupts = <58>; + clocks = <&soc_clocks PXA168_CLK_TWSI1>; + resets = <&soc_clocks PXA168_CLK_TWSI1>; status = "disabled"; }; @@ -126,8 +139,20 @@ reg = <0xd4010000 0x1000>; interrupts = <5 6>; interrupt-names = "rtc 1Hz", "rtc alarm"; + clocks = <&soc_clocks PXA168_CLK_RTC>; + resets = <&soc_clocks PXA168_CLK_RTC>; status = "disabled"; }; }; + + soc_clocks: clocks{ + compatible = "marvell,pxa168-clock"; + reg = <0xd4050000 0x1000>, + <0xd4282800 0x400>, + <0xd4015000 0x1000>; + reg-names = "mpmu", "apmu", "apbc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; }; };