--- zzzz-none-000/linux-3.10.107/arch/arm/boot/dts/r8a73a4-ape6evm.dts	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/boot/dts/r8a73a4-ape6evm.dts	2021-02-04 17:41:59.000000000 +0000
@@ -9,14 +9,21 @@
  */
 
 /dts-v1/;
-/include/ "r8a73a4.dtsi"
+#include "r8a73a4.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "APE6EVM";
 	compatible = "renesas,ape6evm", "renesas,r8a73a4";
 
+	aliases {
+		serial0 = &scifa0;
+	};
+
 	chosen {
-		bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp";
+		bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw";
+		stdout-path = &scifa0;
 	};
 
 	memory@40000000 {
@@ -24,7 +31,40 @@
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 
-	ape6evm_fixed_3v3: fixedregulator@0 {
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
+	};
+
+	vcc_mmc0: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "MMC0 Vcc";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator@1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pfc 76 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	/* Common 1.8V and 3.3V rails, used by several devices on APE6EVM */
+	ape6evm_fixed_1v8: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	ape6evm_fixed_3v3: regulator@3 {
 		compatible = "regulator-fixed";
 		regulator-name = "3V3";
 		regulator-min-microvolt = <3300000>;
@@ -32,21 +72,180 @@
 		regulator-always-on;
 	};
 
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		ethernet@8000000 {
-			compatible = "smsc,lan9118", "smsc,lan9115";
-			reg = <0x08000000 0x1000>;
-			interrupt-parent = <&irqc1>;
-			interrupts = <8 0x4>;
-			phy-mode = "mii";
-			reg-io-width = <4>;
-			smsc,irq-active-high;
-			smsc,irq-push-pull;
-			vdd33a-supply = <&ape6evm_fixed_3v3>;
-			vddvario-supply = <&ape6evm_fixed_3v3>;
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			gpios = <&pfc 28 GPIO_ACTIVE_HIGH>;
+			label = "GNSS_EN";
+		};
+		led2 {
+			gpios = <&pfc 126 GPIO_ACTIVE_HIGH>;
+			label = "NFC_NRST";
+		};
+		led3 {
+			gpios = <&pfc 132 GPIO_ACTIVE_HIGH>;
+			label = "GNSS_NRST";
+		};
+		led4 {
+			gpios = <&pfc 232 GPIO_ACTIVE_HIGH>;
+			label = "BT_WAKEUP";
+		};
+		led5 {
+			gpios = <&pfc 250 GPIO_ACTIVE_HIGH>;
+			label = "STROBE";
+		};
+		led6 {
+			gpios = <&pfc 288 GPIO_ACTIVE_HIGH>;
+			label = "BBRESETOUT";
 		};
 	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&keyboard_pins>;
+
+		zero-key {
+			gpios = <&pfc 324 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_0>;
+			label = "S16";
+			gpio-key,wakeup;
+		};
+
+		menu-key {
+			gpios = <&pfc 325 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+			label = "S17";
+		};
+
+		home-key {
+			gpios = <&pfc 326 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			label = "S18";
+		};
+
+		back-key {
+			gpios = <&pfc 327 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			label = "S19";
+		};
+
+		volup-key {
+			gpios = <&pfc 328 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			label = "S20";
+		};
+
+		voldown-key {
+			gpios = <&pfc 329 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "S21";
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	vdd_dvfs: regulator@1b {
+		compatible = "maxim,max8973";
+		reg = <0x1b>;
+
+		regulator-min-microvolt = <935000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+	operating-points = <
+		/* kHz  uV */
+		1950000 1115000
+		1462500  995000
+	>;
+	voltage-tolerance = <1>; /* 1% */
+};
+
+&bsc {
+	ethernet@8000000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x08000000 0x1000>;
+		interrupt-parent = <&irqc1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		phy-mode = "mii";
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vdd33a-supply = <&ape6evm_fixed_3v3>;
+		vddvario-supply = <&ape6evm_fixed_1v8>;
+	};
+};
+
+&cmt1 {
+	status = "okay";
+};
+
+&pfc {
+	scifa0_pins: serial0 {
+		renesas,groups = "scifa0_data";
+		renesas,function = "scifa0";
+	};
+
+	mmc0_pins: mmc {
+		renesas,groups = "mmc0_data8", "mmc0_ctrl";
+		renesas,function = "mmc0";
+	};
+
+	sdhi0_pins: sd0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi1_pins: sd1 {
+		renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
+		renesas,function = "sdhi1";
+	};
+
+	keyboard_pins: keyboard {
+		renesas,pins = "PORT324", "PORT325", "PORT326", "PORT327",
+			       "PORT328", "PORT329";
+		bias-pull-up;
+	};
+};
+
+&mmcif0 {
+	vmmc-supply = <&vcc_mmc0>;
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	status = "okay";
+};
+
+&scifa0 {
+	pinctrl-0 = <&scifa0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	vmmc-supply = <&vcc_sdhi0>;
+	bus-width = <4>;
+	toshiba,mmc-wrprotect-disable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi0_pins>;
+	status = "okay";
+};
+
+&sdhi1 {
+	vmmc-supply = <&ape6evm_fixed_3v3>;
+	bus-width = <4>;
+	broken-cd;
+	toshiba,mmc-wrprotect-disable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi1_pins>;
+	status = "okay";
 };