--- zzzz-none-000/linux-3.10.107/arch/arm/boot/dts/tegra30-cardhu-a04.dts	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/boot/dts/tegra30-cardhu-a04.dts	2021-02-04 17:41:59.000000000 +0000
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "tegra30-cardhu.dtsi"
+#include "tegra30-cardhu.dtsi"
 
 /* This dts file support the cardhu A04 and later versions of board */
 
@@ -8,6 +8,13 @@
 	model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board";
 	compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30";
 
+	sdhci@78000400 {
+		status = "okay";
+		power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		keep-power-in-suspend;
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -22,7 +29,7 @@
 			regulator-always-on;
 			regulator-boot-on;
 			enable-active-high;
-			gpio = <&pmic 7 0>;
+			gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
 		};
 
 		sys_3v3_reg: regulator@101 {
@@ -34,7 +41,7 @@
 			regulator-always-on;
 			regulator-boot-on;
 			enable-active-high;
-			gpio = <&pmic 6 0>;
+			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
 		};
 
 		usb1_vbus_reg: regulator@102 {
@@ -44,7 +51,7 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
-			gpio = <&gpio 238 0>; /* GPIO PDD6 */
+			gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
 			gpio-open-drain;
 			vin-supply = <&vdd_5v0_reg>;
 		};
@@ -56,7 +63,7 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
-			gpio = <&gpio 236 0>; /* GPIO PDD4 */
+			gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
 			gpio-open-drain;
 			vin-supply = <&vdd_5v0_reg>;
 		};
@@ -68,7 +75,7 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
-			gpio = <&pmic 8 0>;
+			gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
 		};
 
 		vdd_bl_reg: regulator@105 {
@@ -80,7 +87,7 @@
 			regulator-always-on;
 			regulator-boot-on;
 			enable-active-high;
-			gpio = <&gpio 234 0>; /* GPIO PDD2 */
+			gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
 		};
 
 		vdd_bl2_reg: regulator@106 {
@@ -92,14 +99,7 @@
 			regulator-always-on;
 			regulator-boot-on;
 			enable-active-high;
-			gpio = <&gpio 232 0>; /* GPIO PDD0 */
+			gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
 		};
 	};
-
-	sdhci@78000400 {
-		status = "okay";
-		power-gpios = <&gpio 27 0>; /* gpio PD3 */
-		bus-width = <4>;
-		keep-power-in-suspend;
-	};
 };