--- zzzz-none-000/linux-3.10.107/arch/arm/mach-clps711x/board-edb7211.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/mach-clps711x/board-edb7211.c	2021-02-04 17:41:59.000000000 +0000
@@ -12,9 +12,12 @@
 #include <linux/delay.h>
 #include <linux/memblock.h>
 #include <linux/types.h>
+#include <linux/i2c-gpio.h>
 #include <linux/interrupt.h>
-#include <linux/backlight.h>
 #include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/memblock.h>
 
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
@@ -29,6 +32,7 @@
 #include <mach/hardware.h>
 
 #include "common.h"
+#include "devices.h"
 
 #define VIDEORAM_SIZE		SZ_128K
 
@@ -36,11 +40,24 @@
 #define EDB7211_LCDEN		CLPS711X_GPIO(3, 2)
 #define EDB7211_LCDBL		CLPS711X_GPIO(3, 3)
 
+#define EDB7211_I2C_SDA		CLPS711X_GPIO(3, 4)
+#define EDB7211_I2C_SCL		CLPS711X_GPIO(3, 5)
+
 #define EDB7211_FLASH0_BASE	(CS0_PHYS_BASE)
 #define EDB7211_FLASH1_BASE	(CS1_PHYS_BASE)
+
 #define EDB7211_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
 #define EDB7211_CS8900_IRQ	(IRQ_EINT3)
 
+/* The extra 8 lines of the keyboard matrix */
+#define EDB7211_EXTKBD_BASE	(CS3_PHYS_BASE)
+
+static struct i2c_gpio_platform_data edb7211_i2c_pdata __initdata = {
+	.sda_pin	= EDB7211_I2C_SDA,
+	.scl_pin	= EDB7211_I2C_SCL,
+	.scl_is_output_only = 1,
+};
+
 static struct resource edb7211_cs8900_resource[] __initdata = {
 	DEFINE_RES_MEM(EDB7211_CS8900_BASE, SZ_1K),
 	DEFINE_RES_IRQ(EDB7211_CS8900_IRQ),
@@ -92,39 +109,25 @@
 	.set_power	= edb7211_lcd_power_set,
 };
 
-static void edb7211_lcd_backlight_set_intensity(int intensity)
-{
-	gpio_set_value(EDB7211_LCDBL, intensity);
-}
+static struct pwm_lookup edb7211_pwm_lookup[] = {
+	PWM_LOOKUP("clps711x-pwm", 0, "pwm-backlight.0", NULL,
+		   0, PWM_POLARITY_NORMAL),
+};
 
-static struct generic_bl_info edb7211_lcd_backlight_pdata = {
-	.name			= "lcd-backlight.0",
-	.default_intensity	= 0x01,
-	.max_intensity		= 0x01,
-	.set_bl_intensity	= edb7211_lcd_backlight_set_intensity,
+static struct platform_pwm_backlight_data pwm_bl_pdata = {
+	.dft_brightness	= 0x01,
+	.max_brightness	= 0x0f,
+	.enable_gpio	= EDB7211_LCDBL,
 };
 
+static struct resource clps711x_pwm_res =
+	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + PMPCON, SZ_4);
+
 static struct gpio edb7211_gpios[] __initconst = {
 	{ EDB7211_LCD_DC_DC_EN,	GPIOF_OUT_INIT_LOW,	"LCD DC-DC" },
 	{ EDB7211_LCDEN,	GPIOF_OUT_INIT_LOW,	"LCD POWER" },
-	{ EDB7211_LCDBL,	GPIOF_OUT_INIT_LOW,	"LCD BACKLIGHT" },
 };
 
-static struct map_desc edb7211_io_desc[] __initdata = {
-	{	/* Memory-mapped extra keyboard row */
-		.virtual	= IO_ADDRESS(EP7211_PHYS_EXTKBD),
-		.pfn		= __phys_to_pfn(EP7211_PHYS_EXTKBD),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init edb7211_map_io(void)
-{
-	clps711x_map_io();
-	iotable_init(edb7211_io_desc, ARRAY_SIZE(edb7211_io_desc));
-}
-
 /* Reserve screen memory region at the start of main system memory. */
 static void __init edb7211_reserve(void)
 {
@@ -132,7 +135,7 @@
 }
 
 static void __init
-fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi)
+fixup_edb7211(struct tag *tags, char **cmdline)
 {
 	/*
 	 * Bank start addresses are not present in the information
@@ -142,39 +145,44 @@
 	 * Banks sizes _are_ present in the param block, but we're
 	 * not using that information yet.
 	 */
-	mi->bank[0].start = 0xc0000000;
-	mi->bank[0].size = SZ_8M;
-	mi->bank[1].start = 0xc1000000;
-	mi->bank[1].size = SZ_8M;
-	mi->nr_banks = 2;
+	memblock_add(0xc0000000, SZ_8M);
+	memblock_add(0xc1000000, SZ_8M);
 }
 
-static void __init edb7211_init(void)
+static void __init edb7211_init_late(void)
 {
 	gpio_request_array(edb7211_gpios, ARRAY_SIZE(edb7211_gpios));
 
 	platform_device_register(&edb7211_flash_pdev);
-	platform_device_register_data(&platform_bus, "platform-lcd", 0,
+
+	platform_device_register_data(NULL, "platform-lcd", 0,
 				      &edb7211_lcd_power_pdata,
 				      sizeof(edb7211_lcd_power_pdata));
-	platform_device_register_data(&platform_bus, "generic-bl", 0,
-				      &edb7211_lcd_backlight_pdata,
-				      sizeof(edb7211_lcd_backlight_pdata));
+
+	platform_device_register_simple("clps711x-pwm", PLATFORM_DEVID_NONE,
+					&clps711x_pwm_res, 1);
+	pwm_add_table(edb7211_pwm_lookup, ARRAY_SIZE(edb7211_pwm_lookup));
+
+	platform_device_register_data(&platform_bus, "pwm-backlight", 0,
+				      &pwm_bl_pdata, sizeof(pwm_bl_pdata));
+
 	platform_device_register_simple("video-clps711x", 0, NULL, 0);
 	platform_device_register_simple("cs89x0", 0, edb7211_cs8900_resource,
 					ARRAY_SIZE(edb7211_cs8900_resource));
+	platform_device_register_data(NULL, "i2c-gpio", 0,
+				      &edb7211_i2c_pdata,
+				      sizeof(edb7211_i2c_pdata));
 }
 
 MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	/* Maintainer: Jon McClintock */
 	.atag_offset	= VIDEORAM_SIZE + 0x100,
-	.nr_irqs	= CLPS711X_NR_IRQS,
 	.fixup		= fixup_edb7211,
 	.reserve	= edb7211_reserve,
-	.map_io		= edb7211_map_io,
+	.map_io		= clps711x_map_io,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
-	.init_machine	= edb7211_init,
-	.handle_irq	= clps711x_handle_irq,
+	.init_machine	= clps711x_devices_init,
+	.init_late	= edb7211_init_late,
 	.restart	= clps711x_restart,
 MACHINE_END