--- zzzz-none-000/linux-3.10.107/arch/arm/mach-clps711x/include/mach/hardware.h	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/mach-clps711x/include/mach/hardware.h	2021-02-04 17:41:59.000000000 +0000
@@ -24,10 +24,7 @@
 
 #include <mach/clps711x.h>
 
-#define IO_ADDRESS(x)		(0xdc000000 + (((x) & 0x03ffffff) | \
-				(((x) >> 2) & 0x3c000000)))
-
-#define CLPS711X_VIRT_BASE	IOMEM(IO_ADDRESS(CLPS711X_PHYS_BASE))
+#define CLPS711X_VIRT_BASE	IOMEM(0xfeff0000)
 
 #ifndef __ASSEMBLY__
 #define clps_readb(off)		readb(CLPS711X_VIRT_BASE + (off))
@@ -38,13 +35,6 @@
 #define clps_writel(val,off)	writel(val, CLPS711X_VIRT_BASE + (off))
 #endif
 
-/*
- * The physical addresses that the external chip select signals map to is
- * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212
- * processors.  CONFIG_EP72XX_BOOT_ROM is only available if these
- * processors are in use.
- */
-#ifndef CONFIG_EP72XX_ROM_BOOT
 #define CS0_PHYS_BASE		(0x00000000)
 #define CS1_PHYS_BASE		(0x10000000)
 #define CS2_PHYS_BASE		(0x20000000)
@@ -53,16 +43,6 @@
 #define CS5_PHYS_BASE		(0x50000000)
 #define CS6_PHYS_BASE		(0x60000000)
 #define CS7_PHYS_BASE		(0x70000000)
-#else
-#define CS0_PHYS_BASE		(0x70000000)
-#define CS1_PHYS_BASE		(0x60000000)
-#define CS2_PHYS_BASE		(0x50000000)
-#define CS3_PHYS_BASE		(0x40000000)
-#define CS4_PHYS_BASE		(0x30000000)
-#define CS5_PHYS_BASE		(0x20000000)
-#define CS6_PHYS_BASE		(0x10000000)
-#define CS7_PHYS_BASE		(0x00000000)
-#endif
 
 #define CLPS711X_SRAM_BASE	CS6_PHYS_BASE
 #define CLPS711X_SRAM_SIZE	(48 * 1024)
@@ -70,11 +50,4 @@
 #define CLPS711X_SDRAM0_BASE	(0xc0000000)
 #define CLPS711X_SDRAM1_BASE	(0xd0000000)
 
-#if defined (CONFIG_ARCH_EDB7211)
-
-/* The extra 8 lines of the keyboard matrix are wired to chip select 3 */
-#define EP7211_PHYS_EXTKBD	CS3_PHYS_BASE
-
-#endif /* CONFIG_ARCH_EDB7211 */
-
 #endif