--- zzzz-none-000/linux-3.10.107/arch/arm/mach-davinci/board-dm646x-evm.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/mach-davinci/board-dm646x-evm.c	2021-02-04 17:41:59.000000000 +0000
@@ -22,7 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/i2c/pcf857x.h>
 
 #include <media/tvp514x.h>
@@ -33,17 +33,18 @@
 #include <linux/mtd/partitions.h>
 #include <linux/clk.h>
 #include <linux/export.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/i2c-davinci.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/serial.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
 #include <mach/clock.h>
-#include <mach/cdce949.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
 
 #include "davinci.h"
 #include "clock.h"
@@ -397,9 +398,6 @@
 	{
 		I2C_BOARD_INFO("cpld_video", 0x3b),
 	},
-	{
-		I2C_BOARD_INFO("cdce949", 0x6c),
-	},
 };
 
 static struct davinci_i2c_platform_data i2c_pdata = {
@@ -713,31 +711,6 @@
 	evm_init_video();
 }
 
-#define CDCE949_XIN_RATE	27000000
-
-/* CDCE949 support - "lpsc" field is overridden to work as clock number */
-static struct clk cdce_clk_in = {
-	.name	= "cdce_xin",
-	.rate	= CDCE949_XIN_RATE,
-};
-
-static struct clk_lookup cdce_clks[] = {
-	CLK(NULL, "xin", &cdce_clk_in),
-	CLK(NULL, NULL, NULL),
-};
-
-static void __init cdce_clk_init(void)
-{
-	struct clk_lookup *c;
-	struct clk *clk;
-
-	for (c = cdce_clks; c->clk; c++) {
-		clk = c->clk;
-		clkdev_add(c);
-		clk_register(clk);
-	}
-}
-
 #define DM6467T_EVM_REF_FREQ		33000000
 
 static void __init davinci_map_io(void)
@@ -746,14 +719,8 @@
 
 	if (machine_is_davinci_dm6467tevm())
 		davinci_set_refclk_rate(DM6467T_EVM_REF_FREQ);
-
-	cdce_clk_init();
 }
 
-static struct davinci_uart_config uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 #define DM646X_EVM_PHY_ID		"davinci_mdio-0:01"
 /*
  * The following EDMA channels/slots are not being used by drivers (for
@@ -790,10 +757,15 @@
 
 static __init void evm_init(void)
 {
+	int ret;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
+	ret = dm646x_gpio_register();
+	if (ret)
+		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
+
 	evm_init_i2c();
-	davinci_serial_init(&uart_config);
+	davinci_serial_init(dm646x_serial_device);
 	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
 	dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
 
@@ -802,6 +774,9 @@
 
 	platform_device_register(&davinci_nand_device);
 
+	if (davinci_aemif_setup(&davinci_nand_device))
+		pr_warn("%s: Cannot configure AEMIF.\n", __func__);
+
 	dm646x_init_edma(dm646x_edma_rsv);
 
 	if (HAS_ATA)