--- zzzz-none-000/linux-3.10.107/arch/arm/mach-omap2/dss-common.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/mach-omap2/dss-common.c	2021-02-04 17:41:59.000000000 +0000
@@ -25,6 +25,7 @@
 
 #include <linux/kernel.h>
 #include <linux/gpio.h>
+#include <linux/platform_device.h>
 
 #include <video/omapdss.h>
 #include <video/omap-panel-data.h>
@@ -32,220 +33,5 @@
 #include "soc.h"
 #include "dss-common.h"
 #include "mux.h"
+#include "display.h"
 
-#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
-#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
-#define HDMI_GPIO_HPD  63 /* Hotplug detect */
-
-/* Display DVI */
-#define PANDA_DVI_TFP410_POWER_DOWN_GPIO	0
-
-/* Using generic display panel */
-static struct tfp410_platform_data omap4_dvi_panel = {
-	.i2c_bus_num		= 3,
-	.power_down_gpio	= PANDA_DVI_TFP410_POWER_DOWN_GPIO,
-};
-
-static struct omap_dss_device omap4_panda_dvi_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.name			= "dvi",
-	.driver_name		= "tfp410",
-	.data			= &omap4_dvi_panel,
-	.phy.dpi.data_lines	= 24,
-	.channel		= OMAP_DSS_CHANNEL_LCD2,
-};
-
-static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
-	.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
-	.ls_oe_gpio = HDMI_GPIO_LS_OE,
-	.hpd_gpio = HDMI_GPIO_HPD,
-};
-
-static struct omap_dss_device  omap4_panda_hdmi_device = {
-	.name = "hdmi",
-	.driver_name = "hdmi_panel",
-	.type = OMAP_DISPLAY_TYPE_HDMI,
-	.channel = OMAP_DSS_CHANNEL_DIGIT,
-	.data = &omap4_panda_hdmi_data,
-};
-
-static struct omap_dss_device *omap4_panda_dss_devices[] = {
-	&omap4_panda_dvi_device,
-	&omap4_panda_hdmi_device,
-};
-
-static struct omap_dss_board_info omap4_panda_dss_data = {
-	.num_devices	= ARRAY_SIZE(omap4_panda_dss_devices),
-	.devices	= omap4_panda_dss_devices,
-	.default_device	= &omap4_panda_dvi_device,
-};
-
-void __init omap4_panda_display_init(void)
-{
-	omap_display_init(&omap4_panda_dss_data);
-
-	/*
-	 * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
-	 * later have external pull up on the HDMI I2C lines
-	 */
-	if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
-		omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
-	else
-		omap_hdmi_init(0);
-
-	omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
-}
-
-void __init omap4_panda_display_init_of(void)
-{
-	omap_display_init(&omap4_panda_dss_data);
-}
-
-
-/* OMAP4 Blaze display data */
-
-#define DISPLAY_SEL_GPIO	59	/* LCD2/PicoDLP switch */
-#define DLP_POWER_ON_GPIO	40
-
-static struct nokia_dsi_panel_data dsi1_panel = {
-		.name		= "taal",
-		.reset_gpio	= 102,
-		.use_ext_te	= false,
-		.ext_te_gpio	= 101,
-		.esd_interval	= 0,
-		.pin_config = {
-			.num_pins	= 6,
-			.pins		= { 0, 1, 2, 3, 4, 5 },
-		},
-};
-
-static struct omap_dss_device sdp4430_lcd_device = {
-	.name			= "lcd",
-	.driver_name		= "taal",
-	.type			= OMAP_DISPLAY_TYPE_DSI,
-	.data			= &dsi1_panel,
-	.phy.dsi		= {
-		.module		= 0,
-	},
-	.channel		= OMAP_DSS_CHANNEL_LCD,
-};
-
-static struct nokia_dsi_panel_data dsi2_panel = {
-		.name		= "taal",
-		.reset_gpio	= 104,
-		.use_ext_te	= false,
-		.ext_te_gpio	= 103,
-		.esd_interval	= 0,
-		.pin_config = {
-			.num_pins	= 6,
-			.pins		= { 0, 1, 2, 3, 4, 5 },
-		},
-};
-
-static struct omap_dss_device sdp4430_lcd2_device = {
-	.name			= "lcd2",
-	.driver_name		= "taal",
-	.type			= OMAP_DISPLAY_TYPE_DSI,
-	.data			= &dsi2_panel,
-	.phy.dsi		= {
-
-		.module		= 1,
-	},
-	.channel		= OMAP_DSS_CHANNEL_LCD2,
-};
-
-static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
-	.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
-	.ls_oe_gpio = HDMI_GPIO_LS_OE,
-	.hpd_gpio = HDMI_GPIO_HPD,
-};
-
-static struct omap_dss_device sdp4430_hdmi_device = {
-	.name = "hdmi",
-	.driver_name = "hdmi_panel",
-	.type = OMAP_DISPLAY_TYPE_HDMI,
-	.channel = OMAP_DSS_CHANNEL_DIGIT,
-	.data = &sdp4430_hdmi_data,
-};
-
-static struct picodlp_panel_data sdp4430_picodlp_pdata = {
-	.picodlp_adapter_id	= 2,
-	.emu_done_gpio		= 44,
-	.pwrgood_gpio		= 45,
-};
-
-static struct omap_dss_device sdp4430_picodlp_device = {
-	.name			= "picodlp",
-	.driver_name		= "picodlp_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 24,
-	.channel		= OMAP_DSS_CHANNEL_LCD2,
-	.data			= &sdp4430_picodlp_pdata,
-};
-
-static struct omap_dss_device *sdp4430_dss_devices[] = {
-	&sdp4430_lcd_device,
-	&sdp4430_lcd2_device,
-	&sdp4430_hdmi_device,
-	&sdp4430_picodlp_device,
-};
-
-static struct omap_dss_board_info sdp4430_dss_data = {
-	.num_devices	= ARRAY_SIZE(sdp4430_dss_devices),
-	.devices	= sdp4430_dss_devices,
-	.default_device	= &sdp4430_lcd_device,
-};
-
-/*
- * we select LCD2 by default (instead of Pico DLP) by setting DISPLAY_SEL_GPIO.
- * Setting DLP_POWER_ON gpio enables the VDLP_2V5 VDLP_1V8 and VDLP_1V0 rails
- * used by picodlp on the 4430sdp platform. Keep this gpio disabled as LCD2 is
- * selected by default
- */
-void __init omap_4430sdp_display_init(void)
-{
-	int r;
-
-	r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
-			"display_sel");
-	if (r)
-		pr_err("%s: Could not get display_sel GPIO\n", __func__);
-
-	r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
-		"DLP POWER ON");
-	if (r)
-		pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__);
-
-	omap_display_init(&sdp4430_dss_data);
-	/*
-	 * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
-	 * later have external pull up on the HDMI I2C lines
-	 */
-	if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
-		omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
-	else
-		omap_hdmi_init(0);
-
-	omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
-}
-
-void __init omap_4430sdp_display_init_of(void)
-{
-	int r;
-
-	r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
-			"display_sel");
-	if (r)
-		pr_err("%s: Could not get display_sel GPIO\n", __func__);
-
-	r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
-		"DLP POWER ON");
-	if (r)
-		pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__);
-
-	omap_display_init(&sdp4430_dss_data);
-}