--- zzzz-none-000/linux-3.10.107/arch/arm/mach-omap2/msdi.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/mach-omap2/msdi.c	2021-02-04 17:41:59.000000000 +0000
@@ -76,8 +76,8 @@
 			  MAX_MODULE_SOFTRESET_WAIT, c);
 
 	if (c == MAX_MODULE_SOFTRESET_WAIT)
-		pr_warning("%s: %s: softreset failed (waited %d usec)\n",
-			   __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
+		pr_warn("%s: %s: softreset failed (waited %d usec)\n",
+			__func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
 	else
 		pr_debug("%s: %s: softreset in %d usec\n", __func__,
 			 oh->name, c);
@@ -88,72 +88,3 @@
 
 	return 0;
 }
-
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-
-static inline void omap242x_mmc_mux(struct omap_mmc_platform_data
-				    *mmc_controller)
-{
-	if ((mmc_controller->slots[0].switch_pin > 0) && \
-		(mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
-		omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
-					OMAP_PIN_INPUT_PULLUP);
-	if ((mmc_controller->slots[0].gpio_wp > 0) && \
-		(mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
-		omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
-					OMAP_PIN_INPUT_PULLUP);
-
-	omap_mux_init_signal("sdmmc_cmd", 0);
-	omap_mux_init_signal("sdmmc_clki", 0);
-	omap_mux_init_signal("sdmmc_clko", 0);
-	omap_mux_init_signal("sdmmc_dat0", 0);
-	omap_mux_init_signal("sdmmc_dat_dir0", 0);
-	omap_mux_init_signal("sdmmc_cmd_dir", 0);
-	if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) {
-		omap_mux_init_signal("sdmmc_dat1", 0);
-		omap_mux_init_signal("sdmmc_dat2", 0);
-		omap_mux_init_signal("sdmmc_dat3", 0);
-		omap_mux_init_signal("sdmmc_dat_dir1", 0);
-		omap_mux_init_signal("sdmmc_dat_dir2", 0);
-		omap_mux_init_signal("sdmmc_dat_dir3", 0);
-	}
-
-	/*
-	 * Use internal loop-back in MMC/SDIO Module Input Clock
-	 * selection
-	 */
-	if (mmc_controller->slots[0].internal_clock) {
-		u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-		v |= (1 << 24);
-		omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
-	}
-}
-
-void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
-{
-	struct platform_device *pdev;
-	struct omap_hwmod *oh;
-	int id = 0;
-	char *oh_name = "msdi1";
-	char *dev_name = "mmci-omap";
-
-	if (!mmc_data[0]) {
-		pr_err("%s fails: Incomplete platform data\n", __func__);
-		return;
-	}
-
-	omap242x_mmc_mux(mmc_data[0]);
-
-	oh = omap_hwmod_lookup(oh_name);
-	if (!oh) {
-		pr_err("Could not look up %s\n", oh_name);
-		return;
-	}
-	pdev = omap_device_build(dev_name, id, oh, mmc_data[0],
-				 sizeof(struct omap_mmc_platform_data));
-	if (IS_ERR(pdev))
-		WARN(1, "Can'd build omap_device for %s:%s.\n",
-					dev_name, oh->name);
-}
-
-#endif