--- zzzz-none-000/linux-3.10.107/arch/arm/mach-omap2/omap-headsmp.S	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/mach-omap2/omap-headsmp.S	2021-02-04 17:41:59.000000000 +0000
@@ -1,7 +1,7 @@
 /*
  * Secondary CPU startup routine source file.
  *
- * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009-2014 Texas Instruments, Inc.
  *
  * Author:
  *      Santosh Shilimkar <santosh.shilimkar@ti.com>
@@ -20,17 +20,16 @@
 
 #include "omap44xx.h"
 
-	__CPUINIT
-
 /* Physical address needed since MMU not enabled yet on secondary core */
 #define AUX_CORE_BOOT0_PA			0x48281800
+#define API_HYP_ENTRY				0x102
 
 /*
  * OMAP5 specific entry point for secondary CPU to jump from ROM
  * code.  This routine also provides a holding flag into which
  * secondary core is held until we're ready for it to initialise.
  * The primary core will update this flag using a hardware
-+ * register AuxCoreBoot0.
+ * register AuxCoreBoot0.
  */
 ENTRY(omap5_secondary_startup)
 wait:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
@@ -41,7 +40,27 @@
 	cmp	r0, r4
 	bne	wait
 	b	secondary_startup
-END(omap5_secondary_startup)
+ENDPROC(omap5_secondary_startup)
+/*
+ * Same as omap5_secondary_startup except we call into the ROM to
+ * enable HYP mode first.  This is called instead of
+ * omap5_secondary_startup if the primary CPU was put into HYP mode by
+ * the boot loader.
+ */
+ENTRY(omap5_secondary_hyp_startup)
+wait_2:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
+	ldr	r0, [r2]
+	mov	r0, r0, lsr #5
+	mrc	p15, 0, r4, c0, c0, 5
+	and	r4, r4, #0x0f
+	cmp	r0, r4
+	bne	wait_2
+	ldr	r12, =API_HYP_ENTRY
+	adr	r0, hyp_boot
+	smc	#0
+hyp_boot:
+	b	secondary_startup
+ENDPROC(omap5_secondary_hyp_startup)
 /*
  * OMAP4 specific entry point for secondary CPU to jump from ROM
  * code.  This routine also provides a holding flag into which
@@ -49,7 +68,7 @@
  * The primary core will update this flag using a hardware
  * register AuxCoreBoot0.
  */
-ENTRY(omap_secondary_startup)
+ENTRY(omap4_secondary_startup)
 hold:	ldr	r12,=0x103
 	dsb
 	smc	#0			@ read from AuxCoreBoot0
@@ -64,9 +83,9 @@
 	 * should now contain the SVC stack for this core
 	 */
 	b	secondary_startup
-ENDPROC(omap_secondary_startup)
+ENDPROC(omap4_secondary_startup)
 
-ENTRY(omap_secondary_startup_4460)
+ENTRY(omap4460_secondary_startup)
 hold_2:	ldr	r12,=0x103
 	dsb
 	smc	#0			@ read from AuxCoreBoot0
@@ -101,4 +120,4 @@
 	 * should now contain the SVC stack for this core
 	 */
 	b	secondary_startup
-ENDPROC(omap_secondary_startup_4460)
+ENDPROC(omap4460_secondary_startup)