--- zzzz-none-000/linux-3.10.107/arch/arm/mach-omap2/omap-smp.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/mach-omap2/omap-smp.c	2021-02-04 17:41:59.000000000 +0000
@@ -1,5 +1,5 @@
 /*
- * OMAP4 SMP source file. It contains platform specific fucntions
+ * OMAP4 SMP source file. It contains platform specific functions
  * needed for the linux smp kernel.
  *
  * Copyright (C) 2009 Texas Instruments, Inc.
@@ -22,6 +22,7 @@
 #include <linux/irqchip/arm-gic.h>
 
 #include <asm/smp_scu.h>
+#include <asm/virt.h>
 
 #include "omap-secure.h"
 #include "omap-wakeupgen.h"
@@ -39,8 +40,6 @@
 
 #define OMAP5_CORE_COUNT	0x2
 
-u16 pm44xx_errata;
-
 /* SCU base address */
 static void __iomem *scu_base;
 
@@ -51,7 +50,7 @@
 	return scu_base;
 }
 
-static void __cpuinit omap4_secondary_init(unsigned int cpu)
+static void omap4_secondary_init(unsigned int cpu)
 {
 	/*
 	 * Configure ACTRL and enable NS SMP bit access on CPU1 on HS device.
@@ -66,13 +65,20 @@
 							4, 0, 0, 0, 0, 0);
 
 	/*
+	 * Configure the CNTFRQ register for the secondary cpu's which
+	 * indicates the frequency of the cpu local timers.
+	 */
+	if (soc_is_omap54xx() || soc_is_dra7xx())
+		set_cntfreq();
+
+	/*
 	 * Synchronise with the boot thread.
 	 */
 	spin_lock(&boot_lock);
 	spin_unlock(&boot_lock);
 }
 
-static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	static struct clockdomain *cpu1_clkdm;
 	static bool booted;
@@ -87,14 +93,14 @@
 
 	/*
 	 * Update the AuxCoreBoot0 with boot state for secondary core.
-	 * omap_secondary_startup() routine will hold the secondary core till
+	 * omap4_secondary_startup() routine will hold the secondary core till
 	 * the AuxCoreBoot1 register is updated with cpu state
 	 * A barrier is added to ensure that write buffer is drained
 	 */
 	if (omap_secure_apis_support())
 		omap_modify_auxcoreboot0(0x200, 0xfffffdff);
 	else
-		__raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0);
+		writel_relaxed(0x20, base + OMAP_AUX_CORE_BOOT_0);
 
 	if (!cpu1_clkdm && !cpu1_pwrdm) {
 		cpu1_clkdm = clkdm_lookup("mpu1_clkdm");
@@ -137,9 +143,9 @@
 		 * Ensure that CPU power state is set to ON to avoid CPU
 		 * powerdomain transition on wfi
 		 */
-		clkdm_wakeup(cpu1_clkdm);
-		omap_set_pwrdm_state(cpu1_pwrdm, PWRDM_POWER_ON);
-		clkdm_allow_idle(cpu1_clkdm);
+		clkdm_wakeup_nolock(cpu1_clkdm);
+		pwrdm_set_next_pwrst(cpu1_pwrdm, PWRDM_POWER_ON);
+		clkdm_allow_idle_nolock(cpu1_clkdm);
 
 		if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) {
 			while (gic_dist_disabled()) {
@@ -200,7 +206,7 @@
 
 static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 {
-	void *startup_addr = omap_secondary_startup;
+	void *startup_addr = omap4_secondary_startup;
 	void __iomem *base = omap_get_wakeupgen_base();
 
 	/*
@@ -210,10 +216,8 @@
 	if (scu_base)
 		scu_enable(scu_base);
 
-	if (cpu_is_omap446x()) {
-		startup_addr = omap_secondary_startup_4460;
-		pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD;
-	}
+	if (cpu_is_omap446x())
+		startup_addr = omap4460_secondary_startup;
 
 	/*
 	 * Write the address of secondary startup routine into the
@@ -224,8 +228,16 @@
 	if (omap_secure_apis_support())
 		omap_auxcoreboot_addr(virt_to_phys(startup_addr));
 	else
-		__raw_writel(virt_to_phys(omap5_secondary_startup),
-						base + OMAP_AUX_CORE_BOOT_1);
+		/*
+		 * If the boot CPU is in HYP mode then start secondary
+		 * CPU in HYP mode as well.
+		 */
+		if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE)
+			writel_relaxed(virt_to_phys(omap5_secondary_hyp_startup),
+				       base + OMAP_AUX_CORE_BOOT_1);
+		else
+			writel_relaxed(virt_to_phys(omap5_secondary_startup),
+				       base + OMAP_AUX_CORE_BOOT_1);
 
 }