--- zzzz-none-000/linux-3.10.107/arch/arm/mach-prima2/platsmp.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/mach-prima2/platsmp.c	2021-02-04 17:41:59.000000000 +0000
@@ -20,31 +20,11 @@
 
 #include "common.h"
 
-static void __iomem *scu_base;
-static void __iomem *rsc_base;
+static void __iomem *clk_base;
 
 static DEFINE_SPINLOCK(boot_lock);
 
-static struct map_desc scu_io_desc __initdata = {
-	.length		= SZ_4K,
-	.type		= MT_DEVICE,
-};
-
-void __init sirfsoc_map_scu(void)
-{
-	unsigned long base;
-
-	/* Get SCU base */
-	asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
-
-	scu_io_desc.virtual = SIRFSOC_VA(base);
-	scu_io_desc.pfn = __phys_to_pfn(base);
-	iotable_init(&scu_io_desc, 1);
-
-	scu_base = (void __iomem *)SIRFSOC_VA(base);
-}
-
-static void __cpuinit sirfsoc_secondary_init(unsigned int cpu)
+static void sirfsoc_secondary_init(unsigned int cpu)
 {
 	/*
 	 * let the primary processor know we're out of the
@@ -60,37 +40,37 @@
 	spin_unlock(&boot_lock);
 }
 
-static struct of_device_id rsc_ids[]  = {
-	{ .compatible = "sirf,marco-rsc" },
+static const struct of_device_id clk_ids[]  = {
+	{ .compatible = "sirf,atlas7-clkc" },
 	{},
 };
 
-static int __cpuinit sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
 	struct device_node *np;
 
-	np = of_find_matching_node(NULL, rsc_ids);
+	np = of_find_matching_node(NULL, clk_ids);
 	if (!np)
 		return -ENODEV;
 
-	rsc_base = of_iomap(np, 0);
-	if (!rsc_base)
+	clk_base = of_iomap(np, 0);
+	if (!clk_base)
 		return -ENOMEM;
 
 	/*
-	 * write the address of secondary startup into the sram register
-	 * at offset 0x2C, then write the magic number 0x3CAF5D62 to the
-	 * RSC register at offset 0x28, which is what boot rom code is
+	 * write the address of secondary startup into the clkc register
+	 * at offset 0x2bC, then write the magic number 0x3CAF5D62 to the
+	 * clkc register at offset 0x2b8, which is what boot rom code is
 	 * waiting for. This would wake up the secondary core from WFE
 	 */
-#define SIRFSOC_CPU1_JUMPADDR_OFFSET 0x2C
+#define SIRFSOC_CPU1_JUMPADDR_OFFSET 0x2bc
 	__raw_writel(virt_to_phys(sirfsoc_secondary_startup),
-		rsc_base + SIRFSOC_CPU1_JUMPADDR_OFFSET);
+		clk_base + SIRFSOC_CPU1_JUMPADDR_OFFSET);
 
-#define SIRFSOC_CPU1_WAKEMAGIC_OFFSET 0x28
+#define SIRFSOC_CPU1_WAKEMAGIC_OFFSET 0x2b8
 	__raw_writel(0x3CAF5D62,
-		rsc_base + SIRFSOC_CPU1_WAKEMAGIC_OFFSET);
+		clk_base + SIRFSOC_CPU1_WAKEMAGIC_OFFSET);
 
 	/* make sure write buffer is drained */
 	mb();
@@ -106,8 +86,7 @@
 	 * "cpu" is Linux's internal ID.
 	 */
 	pen_release = cpu_logical_map(cpu);
-	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
-	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+	sync_cache_w(&pen_release);
 
 	/*
 	 * Send the secondary CPU SEV, thereby causing the boot monitor to read
@@ -133,15 +112,9 @@
 	return pen_release != -1 ? -ENOSYS : 0;
 }
 
-static void __init sirfsoc_smp_prepare_cpus(unsigned int max_cpus)
-{
-	scu_enable(scu_base);
-}
-
 struct smp_operations sirfsoc_smp_ops __initdata = {
-        .smp_prepare_cpus       = sirfsoc_smp_prepare_cpus,
-        .smp_secondary_init     = sirfsoc_secondary_init,
-        .smp_boot_secondary     = sirfsoc_boot_secondary,
+	.smp_secondary_init     = sirfsoc_secondary_init,
+	.smp_boot_secondary     = sirfsoc_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die                = sirfsoc_cpu_die,
 #endif