--- zzzz-none-000/linux-3.10.107/arch/arm/mach-pxa/em-x270.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/mach-pxa/em-x270.c	2021-02-04 17:41:59.000000000 +0000
@@ -30,7 +30,7 @@
 #include <linux/power_supply.h>
 #include <linux/apm-emulation.h>
 #include <linux/i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/regulator/userspace-consumer.h>
 
@@ -378,7 +378,7 @@
 
 	err = gpio_request(GPIO11_NAND_CS, "NAND CS");
 	if (err) {
-		pr_warning("EM-X270: failed to request NAND CS gpio\n");
+		pr_warn("EM-X270: failed to request NAND CS gpio\n");
 		return;
 	}
 
@@ -386,7 +386,7 @@
 
 	err = gpio_request(nand_rb, "NAND R/B");
 	if (err) {
-		pr_warning("EM-X270: failed to request NAND R/B gpio\n");
+		pr_warn("EM-X270: failed to request NAND R/B gpio\n");
 		gpio_free(GPIO11_NAND_CS);
 		return;
 	}
@@ -477,16 +477,24 @@
 	/* USB Hub power-on and reset */
 	gpio_direction_output(usb_hub_reset, 1);
 	gpio_direction_output(GPIO9_USB_VBUS_EN, 0);
-	regulator_enable(em_x270_usb_ldo);
+	err = regulator_enable(em_x270_usb_ldo);
+	if (err)
+		goto err_free_rst_gpio;
+
 	gpio_set_value(usb_hub_reset, 0);
 	gpio_set_value(usb_hub_reset, 1);
 	regulator_disable(em_x270_usb_ldo);
-	regulator_enable(em_x270_usb_ldo);
+	err = regulator_enable(em_x270_usb_ldo);
+	if (err)
+		goto err_free_rst_gpio;
+
 	gpio_set_value(usb_hub_reset, 0);
 	gpio_set_value(GPIO9_USB_VBUS_EN, 1);
 
 	return 0;
 
+err_free_rst_gpio:
+	gpio_free(usb_hub_reset);
 err_free_vbus_gpio:
 	gpio_free(GPIO9_USB_VBUS_EN);
 err_free_usb_ldo:
@@ -556,8 +564,7 @@
 	}
 
 	err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int,
-			      IRQF_DISABLED | IRQF_TRIGGER_RISING |
-			      IRQF_TRIGGER_FALLING,
+			      IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 			      "MMC card detect", data);
 	if (err) {
 		dev_err(dev, "can't request MMC card detect IRQ: %d\n", err);
@@ -592,7 +599,7 @@
 	return err;
 }
 
-static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
+static int em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
@@ -600,10 +607,11 @@
 		int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
 
 		regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
-		regulator_enable(em_x270_sdio_ldo);
+		return regulator_enable(em_x270_sdio_ldo);
 	} else {
 		regulator_disable(em_x270_sdio_ldo);
 	}
+	return 0;
 }
 
 static void em_x270_mci_exit(struct device *dev, void *data)
@@ -833,21 +841,25 @@
 #endif
 
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int em_x270_module_matrix_keys[] = {
+static const unsigned int em_x270_module_matrix_keys[] = {
 	KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
 	KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
 	KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
 };
 
+static struct matrix_keymap_data em_x270_matrix_keymap_data = {
+	.keymap			= em_x270_module_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(em_x270_module_matrix_keys),
+};
+
 struct pxa27x_keypad_platform_data em_x270_module_keypad_info = {
 	/* code map for the matrix keys */
 	.matrix_key_rows	= 3,
 	.matrix_key_cols	= 3,
-	.matrix_key_map		= em_x270_module_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(em_x270_module_matrix_keys),
+	.matrix_keymap_data	= &em_x270_matrix_keymap_data,
 };
 
-static unsigned int em_x270_exeda_matrix_keys[] = {
+static const unsigned int em_x270_exeda_matrix_keys[] = {
 	KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL),
 	KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE),
 	KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL),
@@ -889,12 +901,16 @@
 	KEY(7, 6, 0), KEY(7, 7, 0),
 };
 
+static struct matrix_keymap_data em_x270_exeda_matrix_keymap_data = {
+	.keymap			= em_x270_exeda_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(em_x270_exeda_matrix_keys),
+};
+
 struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = {
 	/* code map for the matrix keys */
 	.matrix_key_rows	= 8,
 	.matrix_key_cols	= 8,
-	.matrix_key_map		= em_x270_exeda_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(em_x270_exeda_matrix_keys),
+	.matrix_keymap_data	= &em_x270_exeda_matrix_keymap_data,
 };
 
 static void __init em_x270_init_keypad(void)
@@ -1290,6 +1306,8 @@
 	em_x270_init_i2c();
 	em_x270_init_camera();
 	em_x270_userspace_consumers_init();
+
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(EM_X270, "Compulab EM-X270")