--- zzzz-none-000/linux-3.10.107/arch/arm/mach-pxa/magician.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/arch/arm/mach-pxa/magician.c 2021-02-04 17:41:59.000000000 +0000 @@ -24,8 +24,10 @@ #include #include #include +#include #include #include +#include #include #include #include @@ -43,6 +45,12 @@ #include #include +#include + +#include +#include +#include + #include "devices.h" #include "generic.h" @@ -52,36 +60,36 @@ GPIO20_nSDCS_2, GPIO21_nSDCS_3, GPIO15_nCS_1, - GPIO78_nCS_2, /* PASIC3 */ - GPIO79_nCS_3, /* EGPIO CPLD */ + GPIO78_nCS_2, /* PASIC3 */ + GPIO79_nCS_3, /* EGPIO CPLD */ GPIO80_nCS_4, GPIO33_nCS_5, - /* I2C */ + /* I2C UDA1380 + OV9640 */ GPIO117_I2C_SCL, GPIO118_I2C_SDA, - /* PWM 0 */ + /* PWM 0 - LCD backlight */ GPIO16_PWM0_OUT, - /* I2S */ + /* I2S UDA1380 capture */ GPIO28_I2S_BITCLK_OUT, GPIO29_I2S_SDATA_IN, GPIO31_I2S_SYNC, GPIO113_I2S_SYSCLK, - /* SSP 1 */ + /* SSP 1 UDA1380 playback */ GPIO23_SSP1_SCLK, GPIO24_SSP1_SFRM, GPIO25_SSP1_TXD, - /* SSP 2 */ + /* SSP 2 TSC2046 touchscreen */ GPIO19_SSP2_SCLK, GPIO14_SSP2_SFRM, GPIO89_SSP2_TXD, GPIO88_SSP2_RXD, - /* MMC */ + /* MMC/SD/SDHC slot */ GPIO32_MMC_CLK, GPIO92_MMC_DAT_0, GPIO109_MMC_DAT_1, @@ -92,7 +100,7 @@ /* LCD */ GPIOxx_LCD_TFT_16BPP, - /* QCI */ + /* QCI camera interface */ GPIO12_CIF_DD_7, GPIO17_CIF_DD_6, GPIO50_CIF_DD_3, @@ -120,12 +128,13 @@ }; /* - * IRDA + * IrDA */ static struct pxaficp_platform_data magician_ficp_info = { .gpio_pwdown = GPIO83_MAGICIAN_nIR_EN, .transceiver_cap = IR_SIRMODE | IR_OFF, + .gpio_pwdown_inverted = 0, }; /* @@ -134,11 +143,11 @@ #define INIT_KEY(_code, _gpio, _desc) \ { \ - .code = KEY_##_code, \ - .gpio = _gpio, \ - .desc = _desc, \ - .type = EV_KEY, \ - .wakeup = 1, \ + .code = KEY_##_code, \ + .gpio = _gpio, \ + .desc = _desc, \ + .type = EV_KEY, \ + .wakeup = 1, \ } static struct gpio_keys_button magician_button_table[] = { @@ -160,164 +169,162 @@ }; static struct gpio_keys_platform_data gpio_keys_data = { - .buttons = magician_button_table, - .nbuttons = ARRAY_SIZE(magician_button_table), + .buttons = magician_button_table, + .nbuttons = ARRAY_SIZE(magician_button_table), }; static struct platform_device gpio_keys = { - .name = "gpio-keys", - .dev = { + .name = "gpio-keys", + .dev = { .platform_data = &gpio_keys_data, }, - .id = -1, + .id = -1, }; - /* * EGPIO (Xilinx CPLD) * - * 7 32-bit aligned 8-bit registers: 3x output, 1x irq, 3x input + * 32-bit aligned 8-bit registers + * 16 possible registers (reg windows size), only 7 used: + * 3x output, 1x irq, 3x input */ static struct resource egpio_resources[] = { [0] = { - .start = PXA_CS3_PHYS, - .end = PXA_CS3_PHYS + 0x20 - 1, - .flags = IORESOURCE_MEM, + .start = PXA_CS3_PHYS, + .end = PXA_CS3_PHYS + 0x20 - 1, + .flags = IORESOURCE_MEM, }, [1] = { - .start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ), - .end = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ), - .flags = IORESOURCE_IRQ, + .start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ), + .flags = IORESOURCE_IRQ, }, }; static struct htc_egpio_chip egpio_chips[] = { [0] = { - .reg_start = 0, - .gpio_base = MAGICIAN_EGPIO(0, 0), - .num_gpios = 24, - .direction = HTC_EGPIO_OUTPUT, - .initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */ + .reg_start = 0, + .gpio_base = MAGICIAN_EGPIO(0, 0), + .num_gpios = 24, + .direction = HTC_EGPIO_OUTPUT, + /* + * Depends on modules configuration + */ + .initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */ }, [1] = { - .reg_start = 4, - .gpio_base = MAGICIAN_EGPIO(4, 0), - .num_gpios = 24, - .direction = HTC_EGPIO_INPUT, + .reg_start = 4, + .gpio_base = MAGICIAN_EGPIO(4, 0), + .num_gpios = 24, + .direction = HTC_EGPIO_INPUT, }, }; static struct htc_egpio_platform_data egpio_info = { - .reg_width = 8, - .bus_width = 32, - .irq_base = IRQ_BOARD_START, - .num_irqs = 4, - .ack_register = 3, - .chip = egpio_chips, - .num_chips = ARRAY_SIZE(egpio_chips), + .reg_width = 8, + .bus_width = 32, + .irq_base = IRQ_BOARD_START, + .num_irqs = 4, + .ack_register = 3, + .chip = egpio_chips, + .num_chips = ARRAY_SIZE(egpio_chips), }; static struct platform_device egpio = { - .name = "htc-egpio", - .id = -1, - .resource = egpio_resources, - .num_resources = ARRAY_SIZE(egpio_resources), + .name = "htc-egpio", + .id = -1, + .resource = egpio_resources, + .num_resources = ARRAY_SIZE(egpio_resources), .dev = { .platform_data = &egpio_info, }, }; /* - * LCD - Toppoly TD028STEB1 or Samsung LTP280QV + * PXAFB LCD - Toppoly TD028STEB1 or Samsung LTP280QV */ static struct pxafb_mode_info toppoly_modes[] = { { - .pixclock = 96153, - .bpp = 16, - .xres = 240, - .yres = 320, - .hsync_len = 11, - .vsync_len = 3, - .left_margin = 19, - .upper_margin = 2, - .right_margin = 10, - .lower_margin = 2, - .sync = 0, + .pixclock = 96153, + .bpp = 16, + .xres = 240, + .yres = 320, + .hsync_len = 11, + .vsync_len = 3, + .left_margin = 19, + .upper_margin = 2, + .right_margin = 10, + .lower_margin = 2, + .sync = 0, }, }; static struct pxafb_mode_info samsung_modes[] = { { - .pixclock = 96153, - .bpp = 16, - .xres = 240, - .yres = 320, - .hsync_len = 8, - .vsync_len = 4, - .left_margin = 9, - .upper_margin = 4, - .right_margin = 9, - .lower_margin = 4, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .pixclock = 226469, + .bpp = 16, + .xres = 240, + .yres = 320, + .hsync_len = 8, + .vsync_len = 4, + .left_margin = 9, + .upper_margin = 4, + .right_margin = 9, + .lower_margin = 4, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, }, }; static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si) { - pr_debug("Toppoly LCD power\n"); + pr_debug("Toppoly LCD power: %s\n", on ? "on" : "off"); if (on) { - pr_debug("on\n"); gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1); - gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1); + gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1); udelay(2000); gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1); udelay(2000); /* FIXME: enable LCDC here */ udelay(2000); - gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1); + gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1); udelay(2000); - gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1); + gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1); } else { - pr_debug("off\n"); msleep(15); - gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0); + gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0); udelay(500); - gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0); + gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0); udelay(1000); - gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0); + gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0); gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0); } } static void samsung_lcd_power(int on, struct fb_var_screeninfo *si) { - pr_debug("Samsung LCD power\n"); + pr_debug("Samsung LCD power: %s\n", on ? "on" : "off"); if (on) { - pr_debug("on\n"); if (system_rev < 3) gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1); else gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1); - mdelay(10); - gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1); - mdelay(10); - gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1); - mdelay(30); - gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1); - mdelay(10); + mdelay(6); + gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1); + mdelay(6); /* Avdd -> Voff >5ms */ + gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1); + mdelay(16); /* Voff -> Von >(5+10)ms */ + gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1); } else { - pr_debug("off\n"); - mdelay(10); - gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0); - mdelay(30); - gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0); - mdelay(10); - gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0); - mdelay(10); + gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0); + mdelay(16); + gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0); + mdelay(6); + gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0); + mdelay(6); if (system_rev < 3) gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0); else @@ -326,29 +333,43 @@ } static struct pxafb_mach_info toppoly_info = { - .modes = toppoly_modes, - .num_modes = 1, - .fixed_modes = 1, - .lcd_conn = LCD_COLOR_TFT_16BPP, - .pxafb_lcd_power = toppoly_lcd_power, + .modes = toppoly_modes, + .num_modes = 1, + .fixed_modes = 1, + .lcd_conn = LCD_COLOR_TFT_16BPP, + .pxafb_lcd_power = toppoly_lcd_power, }; static struct pxafb_mach_info samsung_info = { - .modes = samsung_modes, - .num_modes = 1, - .fixed_modes = 1, - .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |\ - LCD_ALTERNATE_MAPPING, - .pxafb_lcd_power = samsung_lcd_power, + .modes = samsung_modes, + .num_modes = 1, + .fixed_modes = 1, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL | + LCD_ALTERNATE_MAPPING, + .pxafb_lcd_power = samsung_lcd_power, }; /* * Backlight */ +static struct pwm_lookup magician_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 30923, + PWM_POLARITY_NORMAL), +}; + + /* + * fixed regulator for pwm_backlight + */ + +static struct regulator_consumer_supply pwm_backlight_supply[] = { + REGULATOR_SUPPLY("power", "pwm_backlight"), +}; + + static struct gpio magician_bl_gpios[] = { - { EGPIO_MAGICIAN_BL_POWER, GPIOF_DIR_OUT, "Backlight power" }, - { EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" }, + { EGPIO_MAGICIAN_BL_POWER, GPIOF_DIR_OUT, "Backlight power" }, + { EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" }, }; static int magician_backlight_init(struct device *dev) @@ -358,6 +379,7 @@ static int magician_backlight_notify(struct device *dev, int brightness) { + pr_debug("Brightness = %i\n", brightness); gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness); if (brightness >= 200) { gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1); @@ -373,27 +395,33 @@ gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios)); } +/* + * LCD PWM backlight (main) + * + * MP1521 frequency should be: + * 100-400 Hz = 2 .5*10^6 - 10 *10^6 ns + */ + static struct platform_pwm_backlight_data backlight_data = { - .pwm_id = 0, - .max_brightness = 272, - .dft_brightness = 100, - .pwm_period_ns = 30923, - .init = magician_backlight_init, - .notify = magician_backlight_notify, - .exit = magician_backlight_exit, + .max_brightness = 272, + .dft_brightness = 100, + .enable_gpio = -1, + .init = magician_backlight_init, + .notify = magician_backlight_notify, + .exit = magician_backlight_exit, }; static struct platform_device backlight = { - .name = "pwm-backlight", - .id = -1, - .dev = { - .parent = &pxa27x_device_pwm0.dev, - .platform_data = &backlight_data, + .name = "pwm-backlight", + .id = -1, + .dev = { + .parent = &pxa27x_device_pwm0.dev, + .platform_data = &backlight_data, }, }; /* - * LEDs + * GPIO LEDs, Phone keys backlight, vibra */ static struct gpio_led gpio_leds[] = { @@ -415,69 +443,32 @@ }; static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { + .name = "leds-gpio", + .id = -1, + .dev = { .platform_data = &gpio_led_info, }, }; -static struct pasic3_led pasic3_leds[] = { - { - .led = { - .name = "magician:red", - .default_trigger = "ds2760-battery.0-charging", - }, - .hw_num = 0, - .bit2 = PASIC3_BIT2_LED0, - .mask = PASIC3_MASK_LED0, - }, - { - .led = { - .name = "magician:green", - .default_trigger = "ds2760-battery.0-charging-or-full", - }, - .hw_num = 1, - .bit2 = PASIC3_BIT2_LED1, - .mask = PASIC3_MASK_LED1, - }, - { - .led = { - .name = "magician:blue", - .default_trigger = "bluetooth", - }, - .hw_num = 2, - .bit2 = PASIC3_BIT2_LED2, - .mask = PASIC3_MASK_LED2, - }, -}; - -static struct pasic3_leds_machinfo pasic3_leds_info = { - .num_leds = ARRAY_SIZE(pasic3_leds), - .power_gpio = EGPIO_MAGICIAN_LED_POWER, - .leds = pasic3_leds, -}; - /* * PASIC3 with DS1WM */ static struct resource pasic3_resources[] = { [0] = { - .start = PXA_CS2_PHYS, + .start = PXA_CS2_PHYS, .end = PXA_CS2_PHYS + 0x1b, - .flags = IORESOURCE_MEM, + .flags = IORESOURCE_MEM, }, /* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */ [1] = { - .start = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ), - .end = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + .start = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ), + .end = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; static struct pasic3_platform_data pasic3_platform_data = { - .led_pdata = &pasic3_leds_info, .clock_rate = 4000000, }; @@ -492,25 +483,42 @@ }; /* - * USB "Transceiver" + * PXA UDC + */ + +static void magician_udc_command(int cmd) +{ + if (cmd == PXA2XX_UDC_CMD_CONNECT) + UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE; + else if (cmd == PXA2XX_UDC_CMD_DISCONNECT) + UP2OCR &= ~(UP2OCR_DPPUE | UP2OCR_DPPUBE); +} + +static struct pxa2xx_udc_mach_info magician_udc_info __initdata = { + .udc_command = magician_udc_command, + .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN, +}; + +/* + * USB device VBus detection */ static struct resource gpio_vbus_resource = { - .flags = IORESOURCE_IRQ, - .start = IRQ_MAGICIAN_VBUS, - .end = IRQ_MAGICIAN_VBUS, + .flags = IORESOURCE_IRQ, + .start = IRQ_MAGICIAN_VBUS, + .end = IRQ_MAGICIAN_VBUS, }; static struct gpio_vbus_mach_info gpio_vbus_info = { - .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN, - .gpio_vbus = EGPIO_MAGICIAN_CABLE_STATE_USB, + .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN, + .gpio_vbus = EGPIO_MAGICIAN_CABLE_VBUS, }; static struct platform_device gpio_vbus = { - .name = "gpio-vbus", - .id = -1, - .num_resources = 1, - .resource = &gpio_vbus_resource, + .name = "gpio-vbus", + .id = -1, + .num_resources = 1, + .resource = &gpio_vbus_resource, .dev = { .platform_data = &gpio_vbus_info, }, @@ -520,19 +528,60 @@ * External power */ -static int power_supply_init(struct device *dev) +static int magician_supply_init(struct device *dev) { - return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC"); + int ret = -1; + + ret = gpio_request(EGPIO_MAGICIAN_CABLE_TYPE, "Cable is AC charger"); + if (ret) { + pr_err("Cannot request AC/USB charger GPIO (%i)\n", ret); + goto err_ac; + } + + ret = gpio_request(EGPIO_MAGICIAN_CABLE_INSERTED, "Cable inserted"); + if (ret) { + pr_err("Cannot request cable detection GPIO (%i)\n", ret); + goto err_usb; + } + + return 0; + +err_usb: + gpio_free(EGPIO_MAGICIAN_CABLE_TYPE); +err_ac: + return ret; +} + +static void magician_set_charge(int flags) +{ + if (flags & PDA_POWER_CHARGE_AC) { + pr_debug("Charging from AC\n"); + gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1); + } else if (flags & PDA_POWER_CHARGE_USB) { + pr_debug("Charging from USB\n"); + gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1); + } else { + pr_debug("Charging disabled\n"); + gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 0); + } } static int magician_is_ac_online(void) { - return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC); + return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) && + gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE); /* AC=1 */ +} + +static int magician_is_usb_online(void) +{ + return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) && + (!gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE)); /* USB=0 */ } -static void power_supply_exit(struct device *dev) +static void magician_supply_exit(struct device *dev) { - gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC); + gpio_free(EGPIO_MAGICIAN_CABLE_INSERTED); + gpio_free(EGPIO_MAGICIAN_CABLE_TYPE); } static char *magician_supplicants[] = { @@ -540,38 +589,40 @@ }; static struct pda_power_pdata power_supply_info = { - .init = power_supply_init, - .is_ac_online = magician_is_ac_online, - .exit = power_supply_exit, - .supplied_to = magician_supplicants, - .num_supplicants = ARRAY_SIZE(magician_supplicants), + .init = magician_supply_init, + .exit = magician_supply_exit, + .is_ac_online = magician_is_ac_online, + .is_usb_online = magician_is_usb_online, + .set_charge = magician_set_charge, + .supplied_to = magician_supplicants, + .num_supplicants = ARRAY_SIZE(magician_supplicants), }; static struct resource power_supply_resources[] = { [0] = { - .name = "ac", - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | - IORESOURCE_IRQ_LOWEDGE, - .start = IRQ_MAGICIAN_VBUS, - .end = IRQ_MAGICIAN_VBUS, + .name = "ac", + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | + IORESOURCE_IRQ_LOWEDGE, + .start = IRQ_MAGICIAN_VBUS, + .end = IRQ_MAGICIAN_VBUS, }, [1] = { - .name = "usb", - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | - IORESOURCE_IRQ_LOWEDGE, - .start = IRQ_MAGICIAN_VBUS, - .end = IRQ_MAGICIAN_VBUS, + .name = "usb", + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | + IORESOURCE_IRQ_LOWEDGE, + .start = IRQ_MAGICIAN_VBUS, + .end = IRQ_MAGICIAN_VBUS, }, }; static struct platform_device power_supply = { - .name = "pda-power", - .id = -1, - .dev = { + .name = "pda-power", + .id = -1, + .dev = { .platform_data = &power_supply_info, }, - .resource = power_supply_resources, - .num_resources = ARRAY_SIZE(power_supply_resources), + .resource = power_supply_resources, + .num_resources = ARRAY_SIZE(power_supply_resources), }; /* @@ -585,11 +636,12 @@ static struct regulator_init_data bq24022_init_data = { .constraints = { - .max_uA = 500000, - .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS, + .max_uA = 500000, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT | + REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers), - .consumer_supplies = bq24022_consumers, + .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers), + .consumer_supplies = bq24022_consumers, }; static struct gpio bq24022_gpios[] = { @@ -602,39 +654,85 @@ }; static struct gpio_regulator_config bq24022_info = { - .supply_name = "bq24022", + .supply_name = "bq24022", - .enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN, - .enable_high = 0, - .enabled_at_boot = 0, + .enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN, + .enable_high = 0, + .enabled_at_boot = 1, - .gpios = bq24022_gpios, - .nr_gpios = ARRAY_SIZE(bq24022_gpios), + .gpios = bq24022_gpios, + .nr_gpios = ARRAY_SIZE(bq24022_gpios), - .states = bq24022_states, - .nr_states = ARRAY_SIZE(bq24022_states), + .states = bq24022_states, + .nr_states = ARRAY_SIZE(bq24022_states), - .type = REGULATOR_CURRENT, - .init_data = &bq24022_init_data, + .type = REGULATOR_CURRENT, + .init_data = &bq24022_init_data, }; static struct platform_device bq24022 = { - .name = "gpio-regulator", - .id = -1, - .dev = { + .name = "gpio-regulator", + .id = -1, + .dev = { .platform_data = &bq24022_info, }, }; /* + * Vcore regulator MAX1587A + */ + +static struct regulator_consumer_supply magician_max1587a_consumers[] = { + REGULATOR_SUPPLY("vcc_core", NULL), +}; + +static struct regulator_init_data magician_max1587a_v3_info = { + .constraints = { + .name = "vcc_core range", + .min_uV = 700000, + .max_uV = 1475000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .consumer_supplies = magician_max1587a_consumers, + .num_consumer_supplies = ARRAY_SIZE(magician_max1587a_consumers), +}; + +static struct max1586_subdev_data magician_max1587a_subdevs[] = { + { + .name = "vcc_core", + .id = MAX1586_V3, + .platform_data = &magician_max1587a_v3_info, + } +}; + +static struct max1586_platform_data magician_max1587a_info = { + .subdevs = magician_max1587a_subdevs, + .num_subdevs = ARRAY_SIZE(magician_max1587a_subdevs), + /* + * NOTICE measured directly on the PCB (board_id == 0x3a), but + * if R24 is present, it will boost the voltage + * (write 1.475V, get 1.645V and smoke) + */ + .v3_gain = MAX1586_GAIN_NO_R24, +}; + +static struct i2c_board_info magician_pwr_i2c_board_info[] __initdata = { + { + I2C_BOARD_INFO("max1586", 0x14), + .platform_data = &magician_max1587a_info, + }, +}; + +/* * MMC/SD */ static int magician_mci_init(struct device *dev, - irq_handler_t detect_irq, void *data) + irq_handler_t detect_irq, void *data) { - return request_irq(IRQ_MAGICIAN_SD, detect_irq, IRQF_DISABLED, - "mmc card detect", data); + return request_irq(IRQ_MAGICIAN_SD, detect_irq, 0, + "mmc card detect", data); } static void magician_mci_exit(struct device *dev, void *data) @@ -643,9 +741,9 @@ } static struct pxamci_platform_data magician_mci_info = { - .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .init = magician_mci_init, - .exit = magician_mci_exit, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = magician_mci_init, + .exit = magician_mci_exit, .gpio_card_detect = -1, .gpio_card_ro = EGPIO_MAGICIAN_nSD_READONLY, .gpio_card_ro_invert = 1, @@ -659,47 +757,102 @@ static struct pxaohci_platform_data magician_ohci_info = { .port_mode = PMM_PERPORT_MODE, - .flags = ENABLE_PORT1 | ENABLE_PORT3 | POWER_CONTROL_LOW, + /* port1: CSR Bluetooth, port2: OTG with UDC */ + .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW, .power_budget = 0, + .power_on_delay = 100, }; - /* * StrataFlash */ +static int magician_flash_init(struct platform_device *pdev) +{ + int ret = gpio_request(EGPIO_MAGICIAN_FLASH_VPP, "flash Vpp enable"); + + if (ret) { + pr_err("Cannot request flash enable GPIO (%i)\n", ret); + return ret; + } + + ret = gpio_direction_output(EGPIO_MAGICIAN_FLASH_VPP, 1); + if (ret) { + pr_err("Cannot set direction for flash enable (%i)\n", ret); + gpio_free(EGPIO_MAGICIAN_FLASH_VPP); + } + + return ret; +} + static void magician_set_vpp(struct platform_device *pdev, int vpp) { gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp); } +static void magician_flash_exit(struct platform_device *pdev) +{ + gpio_free(EGPIO_MAGICIAN_FLASH_VPP); +} + static struct resource strataflash_resource = { - .start = PXA_CS0_PHYS, - .end = PXA_CS0_PHYS + SZ_64M - 1, - .flags = IORESOURCE_MEM, + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct mtd_partition magician_flash_parts[] = { + { + .name = "Bootloader", + .offset = 0x0, + .size = 0x40000, + .mask_flags = MTD_WRITEABLE, /* EXPERIMENTAL */ + }, + { + .name = "Linux Kernel", + .offset = 0x40000, + .size = MTDPART_SIZ_FULL, + }, }; +/* + * physmap-flash driver + */ + static struct physmap_flash_data strataflash_data = { - .width = 4, - .set_vpp = magician_set_vpp, + .width = 4, + .init = magician_flash_init, + .set_vpp = magician_set_vpp, + .exit = magician_flash_exit, + .parts = magician_flash_parts, + .nr_parts = ARRAY_SIZE(magician_flash_parts), }; static struct platform_device strataflash = { - .name = "physmap-flash", - .id = -1, - .resource = &strataflash_resource, - .num_resources = 1, + .name = "physmap-flash", + .id = -1, + .resource = &strataflash_resource, + .num_resources = 1, .dev = { .platform_data = &strataflash_data, }, }; /* - * I2C + * PXA I2C main controller */ static struct i2c_pxa_platform_data i2c_info = { - .fast_mode = 1, + /* OV9640 I2C device doesn't support fast mode */ + .fast_mode = 0, +}; + +/* + * PXA I2C power controller + */ + +static struct i2c_pxa_platform_data magician_i2c_power_info = { + .fast_mode = 1, }; /* @@ -719,12 +872,13 @@ }; static struct gpio magician_global_gpios[] = { - { GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" }, + { GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" }, { GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" }, - { GPIO104_MAGICIAN_LCD_POWER_1, GPIOF_OUT_INIT_LOW, "LCD power 1" }, - { GPIO105_MAGICIAN_LCD_POWER_2, GPIOF_OUT_INIT_LOW, "LCD power 2" }, - { GPIO106_MAGICIAN_LCD_POWER_3, GPIOF_OUT_INIT_LOW, "LCD power 3" }, - { GPIO83_MAGICIAN_nIR_EN, GPIOF_OUT_INIT_HIGH, "nIR_EN" }, + + /* NOTICE valid LCD init sequence */ + { GPIO106_MAGICIAN_LCD_DCDC_NRESET, GPIOF_OUT_INIT_LOW, "LCD DCDC nreset" }, + { GPIO104_MAGICIAN_LCD_VOFF_EN, GPIOF_OUT_INIT_LOW, "LCD VOFF enable" }, + { GPIO105_MAGICIAN_LCD_VON_EN, GPIOF_OUT_INIT_LOW, "LCD VON enable" }, }; static void __init magician_init(void) @@ -736,44 +890,55 @@ pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config)); err = gpio_request_array(ARRAY_AND_SIZE(magician_global_gpios)); if (err) - pr_err("magician: Failed to request GPIOs: %d\n", err); + pr_err("magician: Failed to request global GPIOs: %d\n", err); pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - platform_add_devices(ARRAY_AND_SIZE(devices)); + pwm_add_table(magician_pwm_lookup, ARRAY_SIZE(magician_pwm_lookup)); pxa_set_ficp_info(&magician_ficp_info); - pxa27x_set_i2c_power_info(NULL); + pxa27x_set_i2c_power_info(&magician_i2c_power_info); pxa_set_i2c_info(&i2c_info); + + i2c_register_board_info(1, + ARRAY_AND_SIZE(magician_pwr_i2c_board_info)); + pxa_set_mci_info(&magician_mci_info); pxa_set_ohci_info(&magician_ohci_info); + pxa_set_udc_info(&magician_udc_info); /* Check LCD type we have */ cpld = ioremap_nocache(PXA_CS3_PHYS, 0x1000); if (cpld) { - u8 board_id = __raw_readb(cpld+0x14); + u8 board_id = __raw_readb(cpld + 0x14); + iounmap(cpld); system_rev = board_id & 0x7; lcd_select = board_id & 0x8; pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly"); if (lcd_select && (system_rev < 3)) + /* NOTICE valid LCD init sequence */ gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER, - GPIOF_OUT_INIT_LOW, "SAMSUNG_POWER"); - pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info); + GPIOF_OUT_INIT_LOW, "Samsung LCD Power"); + pxa_set_fb_info(NULL, + lcd_select ? &samsung_info : &toppoly_info); } else pr_err("LCD detection: CPLD mapping failed\n"); -} + regulator_register_always_on(0, "power", pwm_backlight_supply, + ARRAY_SIZE(pwm_backlight_supply), 5000000); + + platform_add_devices(ARRAY_AND_SIZE(devices)); +} MACHINE_START(MAGICIAN, "HTC Magician") - .atag_offset = 0x100, - .map_io = pxa27x_map_io, - .nr_irqs = MAGICIAN_NR_IRQS, - .init_irq = pxa27x_init_irq, - .handle_irq = pxa27x_handle_irq, - .init_machine = magician_init, + .atag_offset = 0x100, + .map_io = pxa27x_map_io, + .nr_irqs = MAGICIAN_NR_IRQS, + .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, + .init_machine = magician_init, .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END