--- zzzz-none-000/linux-3.10.107/arch/arm/mach-pxa/spitz.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/mach-pxa/spitz.c	2021-02-04 17:41:59.000000000 +0000
@@ -20,7 +20,7 @@
 #include <linux/leds.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
@@ -31,6 +31,8 @@
 #include <linux/regulator/machine.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/memblock.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -597,7 +599,7 @@
  * NOTE: The card detect interrupt isn't debounced so we delay it by 250ms to
  * give the card a chance to fully insert/eject.
  */
-static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
+static int spitz_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
@@ -605,6 +607,8 @@
 		spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, SCOOP_CPR_SD_3V);
 	else
 		spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, 0x0);
+
+	return 0;
 }
 
 static struct pxamci_platform_data spitz_mci_platform_data = {
@@ -920,14 +924,22 @@
 #endif
 
 /******************************************************************************
+ * Audio devices
+ ******************************************************************************/
+static inline void spitz_audio_init(void)
+{
+	platform_device_register_simple("spitz-audio", -1, NULL, 0);
+}
+
+/******************************************************************************
  * Machine init
  ******************************************************************************/
 static void spitz_poweroff(void)
 {
-	pxa_restart('g', NULL);
+	pxa_restart(REBOOT_GPIO, NULL);
 }
 
-static void spitz_restart(char mode, const char *cmd)
+static void spitz_restart(enum reboot_mode mode, const char *cmd)
 {
 	uint32_t msc0 = __raw_readl(MSC0);
 	/* Bootloader magic for a reboot */
@@ -966,20 +978,19 @@
 	spitz_nor_init();
 	spitz_nand_init();
 	spitz_i2c_init();
+	spitz_audio_init();
+
+	regulator_has_full_constraints();
 }
 
-static void __init spitz_fixup(struct tag *tags, char **cmdline,
-			       struct meminfo *mi)
+static void __init spitz_fixup(struct tag *tags, char **cmdline)
 {
 	sharpsl_save_param();
-	mi->nr_banks = 1;
-	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].size = (64*1024*1024);
+	memblock_add(0xa0000000, SZ_64M);
 }
 
 #ifdef CONFIG_MACH_SPITZ
 MACHINE_START(SPITZ, "SHARP Spitz")
-	.restart_mode	= 'g',
 	.fixup		= spitz_fixup,
 	.map_io		= pxa27x_map_io,
 	.nr_irqs	= PXA_NR_IRQS,
@@ -993,7 +1004,6 @@
 
 #ifdef CONFIG_MACH_BORZOI
 MACHINE_START(BORZOI, "SHARP Borzoi")
-	.restart_mode	= 'g',
 	.fixup		= spitz_fixup,
 	.map_io		= pxa27x_map_io,
 	.nr_irqs	= PXA_NR_IRQS,
@@ -1007,7 +1017,6 @@
 
 #ifdef CONFIG_MACH_AKITA
 MACHINE_START(AKITA, "SHARP Akita")
-	.restart_mode	= 'g',
 	.fixup		= spitz_fixup,
 	.map_io		= pxa27x_map_io,
 	.nr_irqs	= PXA_NR_IRQS,