--- zzzz-none-000/linux-3.10.107/arch/arm/mach-pxa/viper.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/mach-pxa/viper.c	2021-02-04 17:41:59.000000000 +0000
@@ -39,6 +39,7 @@
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/serial_8250.h>
 #include <linux/smc91x.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/usb/isp116x.h>
 #include <linux/mtd/mtd.h>
@@ -276,8 +277,9 @@
 			viper_irq_enabled_mask;
 }
 
-static void viper_irq_handler(unsigned int irq, struct irq_desc *desc)
+static void viper_irq_handler(struct irq_desc *desc)
 {
+	unsigned int irq;
 	unsigned long pending;
 
 	pending = viper_irq_pending();
@@ -313,7 +315,7 @@
 		isa_irq = viper_bit_to_irq(level);
 		irq_set_chip_and_handler(isa_irq, &viper_irq_chip,
 					 handle_edge_irq);
-		set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);
+		irq_clear_status_flags(isa_irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
 
 	irq_set_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
@@ -349,6 +351,11 @@
 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 };
 
+static struct pwm_lookup viper_pwm_lookup[] = {
+	PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static int viper_backlight_init(struct device *dev)
 {
 	int ret;
@@ -397,10 +404,9 @@
 }
 
 static struct platform_pwm_backlight_data viper_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 100,
 	.dft_brightness	= 100,
-	.pwm_period_ns	= 1000000,
+	.enable_gpio	= -1,
 	.init		= viper_backlight_init,
 	.notify		= viper_backlight_notify,
 	.exit		= viper_backlight_exit,
@@ -768,7 +774,7 @@
 
 static int __init viper_tpm_setup(char *str)
 {
-	return strict_strtoul(str, 10, &viper_tpm) >= 0;
+	return kstrtoul(str, 10, &viper_tpm) >= 0;
 }
 
 __setup("tpm=", viper_tpm_setup);
@@ -884,9 +890,6 @@
 			viper_set_core_cpu_voltage(freq->new, 0);
 		}
 		break;
-	case CPUFREQ_RESUMECHANGE:
-		viper_set_core_cpu_voltage(freq->new, 0);
-		break;
 	default:
 		/* ignore */
 		break;
@@ -940,6 +943,7 @@
 		smc91x_device.num_resources--;
 
 	pxa_set_i2c_info(NULL);
+	pwm_add_table(viper_pwm_lookup, ARRAY_SIZE(viper_pwm_lookup));
 	platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs));
 
 	viper_init_vcore_gpios();