--- zzzz-none-000/linux-3.10.107/arch/arm/mach-s3c24xx/s3c2410.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/mach-s3c24xx/s3c2410.c	2021-02-04 17:41:59.000000000 +0000
@@ -21,7 +21,9 @@
 #include <linux/device.h>
 #include <linux/syscore_ops.h>
 #include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
 #include <linux/platform_device.h>
+#include <linux/reboot.h>
 #include <linux/io.h>
 
 #include <asm/mach/arch.h>
@@ -29,20 +31,17 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/gpio-samsung.h>
 #include <asm/irq.h>
 #include <asm/system_misc.h>
 
 #include <plat/cpu-freq.h>
 
 #include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/pll.h>
 #include <plat/pm.h>
-#include <plat/watchdog-reset.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -81,65 +80,6 @@
 	iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
 }
 
-void __init_or_cpufreq s3c2410_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long tmp;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long pclk;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	/* now we've got our machine bits initialised, work out what
-	 * clocks we've got */
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
-
-	tmp = __raw_readl(S3C2410_CLKDIVN);
-
-	/* work out clock scalings */
-
-	hclk = fclk / ((tmp & S3C2410_CLKDIVN_HDIVN) ? 2 : 1);
-	pclk = hclk / ((tmp & S3C2410_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brieft summary of clocks, etc */
-
-	printk("S3C2410: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them
-	 */
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-/* fake ARMCLK for use with cpufreq, etc. */
-
-static struct clk s3c2410_armclk = {
-	.name	= "armclk",
-	.parent	= &clk_f,
-	.id	= -1,
-};
-
-static struct clk_lookup s3c2410_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-};
-
-void __init s3c2410_init_clocks(int xtal)
-{
-	s3c24xx_register_baseclocks(xtal);
-	s3c2410_setup_clocks();
-	s3c2410_baseclk_add();
-	s3c24xx_register_clock(&s3c2410_armclk);
-	clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup));
-}
-
 struct bus_type s3c2410_subsys = {
 	.name = "s3c2410-core",
 	.dev_name = "s3c2410-core",
@@ -181,7 +121,7 @@
 {
 	printk("S3C2410: Initialising architecture\n");
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 	register_syscore_ops(&s3c2410_pm_syscore_ops);
 	register_syscore_ops(&s3c24xx_irq_syscore_ops);
 #endif
@@ -194,15 +134,3 @@
 	s3c2410_dev.bus = &s3c2410a_subsys;
 	return s3c2410_init();
 }
-
-void s3c2410_restart(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		soft_restart(0);
-	}
-
-	arch_wdt_reset();
-
-	/* we'll take a jump through zero as a poor second */
-	soft_restart(0);
-}