--- zzzz-none-000/linux-3.10.107/arch/arm/mach-ux500/board-mop500-audio.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/mach-ux500/board-mop500-audio.c	2021-02-04 17:41:59.000000000 +0000
@@ -7,170 +7,71 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
 #include <linux/platform_data/dma-ste-dma40.h>
 
-#include "devices.h"
-#include "irqs.h"
 #include <linux/platform_data/asoc-ux500-msp.h>
 
 #include "ste-dma40-db8500.h"
 #include "board-mop500.h"
-#include "devices-db8500.h"
-#include "pins-db8500.h"
 
 static struct stedma40_chan_cfg msp0_dma_rx = {
 	.high_priority = true,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-
-	.src_dev_type = DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-
-	.src_info.psize = STEDMA40_PSIZE_LOG_4,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
-	/* data_width is set during configuration */
+	.dir = DMA_DEV_TO_MEM,
+	.dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0,
 };
 
 static struct stedma40_chan_cfg msp0_dma_tx = {
 	.high_priority = true,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-
-	.src_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.dst_dev_type = DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX,
-
-	.src_info.psize = STEDMA40_PSIZE_LOG_4,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
-	/* data_width is set during configuration */
+	.dir = DMA_MEM_TO_DEV,
+	.dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0,
 };
 
 struct msp_i2s_platform_data msp0_platform_data = {
-	.id = MSP_I2S_0,
+	.id = 0,
 	.msp_i2s_dma_rx = &msp0_dma_rx,
 	.msp_i2s_dma_tx = &msp0_dma_tx,
 };
 
 static struct stedma40_chan_cfg msp1_dma_rx = {
 	.high_priority = true,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-
-	.src_dev_type = DB8500_DMA_DEV30_MSP3_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-
-	.src_info.psize = STEDMA40_PSIZE_LOG_4,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
-	/* data_width is set during configuration */
+	.dir = DMA_DEV_TO_MEM,
+	.dev_type = DB8500_DMA_DEV30_MSP3,
 };
 
 static struct stedma40_chan_cfg msp1_dma_tx = {
 	.high_priority = true,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-
-	.src_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.dst_dev_type = DB8500_DMA_DEV30_MSP1_TX,
-
-	.src_info.psize = STEDMA40_PSIZE_LOG_4,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
-	/* data_width is set during configuration */
+	.dir = DMA_MEM_TO_DEV,
+	.dev_type = DB8500_DMA_DEV30_MSP1,
 };
 
 struct msp_i2s_platform_data msp1_platform_data = {
-	.id = MSP_I2S_1,
+	.id = 1,
 	.msp_i2s_dma_rx = NULL,
 	.msp_i2s_dma_tx = &msp1_dma_tx,
 };
 
 static struct stedma40_chan_cfg msp2_dma_rx = {
 	.high_priority = true,
-	.dir = STEDMA40_PERIPH_TO_MEM,
-
-	.src_dev_type = DB8500_DMA_DEV14_MSP2_RX,
-	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-
-	/* MSP2 DMA doesn't work with PSIZE == 4 on DB8500v2 */
-	.src_info.psize = STEDMA40_PSIZE_LOG_1,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_1,
-
-	/* data_width is set during configuration */
+	.dir = DMA_DEV_TO_MEM,
+	.dev_type = DB8500_DMA_DEV14_MSP2,
 };
 
 static struct stedma40_chan_cfg msp2_dma_tx = {
 	.high_priority = true,
-	.dir = STEDMA40_MEM_TO_PERIPH,
-
-	.src_dev_type = STEDMA40_DEV_DST_MEMORY,
-	.dst_dev_type = DB8500_DMA_DEV14_MSP2_TX,
-
-	.src_info.psize = STEDMA40_PSIZE_LOG_4,
-	.dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
+	.dir = DMA_MEM_TO_DEV,
+	.dev_type = DB8500_DMA_DEV14_MSP2,
 	.use_fixed_channel = true,
 	.phy_channel = 1,
-
-	/* data_width is set during configuration */
-};
-
-static struct platform_device *db8500_add_msp_i2s(struct device *parent,
-			int id,
-			resource_size_t base, int irq,
-			struct msp_i2s_platform_data *pdata)
-{
-	struct platform_device *pdev;
-	struct resource res[] = {
-		DEFINE_RES_MEM(base, SZ_4K),
-		DEFINE_RES_IRQ(irq),
-	};
-
-	pr_info("Register platform-device 'ux500-msp-i2s', id %d, irq %d\n",
-		id, irq);
-	pdev = platform_device_register_resndata(parent, "ux500-msp-i2s", id,
-						res, ARRAY_SIZE(res),
-						pdata, sizeof(*pdata));
-	if (!pdev) {
-		pr_err("Failed to register platform-device 'ux500-msp-i2s.%d'!\n",
-			id);
-		return NULL;
-	}
-
-	return pdev;
-}
-
-/* Platform device for ASoC MOP500 machine */
-static struct platform_device snd_soc_mop500 = {
-	.name = "snd-soc-mop500",
-	.id = 0,
-	.dev = {
-		.platform_data = NULL,
-	},
 };
 
 struct msp_i2s_platform_data msp2_platform_data = {
-	.id = MSP_I2S_2,
+	.id = 2,
 	.msp_i2s_dma_rx = &msp2_dma_rx,
 	.msp_i2s_dma_tx = &msp2_dma_tx,
 };
 
 struct msp_i2s_platform_data msp3_platform_data = {
-	.id		= MSP_I2S_3,
+	.id		= 3,
 	.msp_i2s_dma_rx	= &msp1_dma_rx,
 	.msp_i2s_dma_tx	= NULL,
 };
-
-void mop500_audio_init(struct device *parent)
-{
-	pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__);
-	platform_device_register(&snd_soc_mop500);
-
-	pr_info("Initialize MSP I2S-devices.\n");
-	db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
-			   &msp0_platform_data);
-	db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
-			   &msp1_platform_data);
-	db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2,
-			   &msp2_platform_data);
-	db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
-			   &msp3_platform_data);
-}