--- zzzz-none-000/linux-3.10.107/arch/arm/mm/proc-xsc3.S	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm/mm/proc-xsc3.S	2021-02-04 17:41:59.000000000 +0000
@@ -83,7 +83,7 @@
  * Nothing too exciting at the moment
  */
 ENTRY(cpu_xsc3_proc_init)
-	mov	pc, lr
+	ret	lr
 
 /*
  * cpu_xsc3_proc_fin()
@@ -93,7 +93,7 @@
 	bic	r0, r0, #0x1800			@ ...IZ...........
 	bic	r0, r0, #0x0006			@ .............CA.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mov	pc, lr
+	ret	lr
 
 /*
  * cpu_xsc3_reset(loc)
@@ -119,7 +119,7 @@
 	@ CAUTION: MMU turned off from this point.  We count on the pipeline
 	@ already containing those two last instructions to survive.
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I and D TLBs
-	mov	pc, r0
+	ret	r0
 ENDPROC(cpu_xsc3_reset)
 	.popsection
 
@@ -138,7 +138,7 @@
 ENTRY(cpu_xsc3_do_idle)
 	mov	r0, #1
 	mcr	p14, 0, r0, c7, c0, 0		@ go to idle
-	mov	pc, lr
+	ret	lr
 
 /* ================================= CACHE ================================ */
 
@@ -150,7 +150,7 @@
 ENTRY(xsc3_flush_icache_all)
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mov	pc, lr
+	ret	lr
 ENDPROC(xsc3_flush_icache_all)
 
 /*
@@ -176,7 +176,7 @@
 	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate L1 I cache and BTB
 	mcrne	p15, 0, ip, c7, c10, 4		@ data write barrier
 	mcrne	p15, 0, ip, c7, c5, 4		@ prefetch flush
-	mov	pc, lr
+	ret	lr
 
 /*
  *	flush_user_cache_range(start, end, vm_flags)
@@ -205,7 +205,7 @@
 	mcrne	p15, 0, ip, c7, c5, 6		@ invalidate BTB
 	mcrne	p15, 0, ip, c7, c10, 4		@ data write barrier
 	mcrne	p15, 0, ip, c7, c5, 4		@ prefetch flush
-	mov	pc, lr
+	ret	lr
 
 /*
  *	coherent_kern_range(start, end)
@@ -232,7 +232,7 @@
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate L1 I cache and BTB
 	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
 	mcr	p15, 0, r0, c7, c5, 4		@ prefetch flush
-	mov	pc, lr
+	ret	lr
 
 /*
  *	flush_kern_dcache_area(void *addr, size_t size)
@@ -253,7 +253,7 @@
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate L1 I cache and BTB
 	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
 	mcr	p15, 0, r0, c7, c5, 4		@ prefetch flush
-	mov	pc, lr
+	ret	lr
 
 /*
  *	dma_inv_range(start, end)
@@ -277,7 +277,7 @@
 	cmp	r0, r1
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
-	mov	pc, lr
+	ret	lr
 
 /*
  *	dma_clean_range(start, end)
@@ -294,7 +294,7 @@
 	cmp	r0, r1
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
-	mov	pc, lr
+	ret	lr
 
 /*
  *	dma_flush_range(start, end)
@@ -311,7 +311,7 @@
 	cmp	r0, r1
 	blo	1b
 	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
-	mov	pc, lr
+	ret	lr
 
 /*
  *	dma_map_area(start, size, dir)
@@ -334,7 +334,7 @@
  *	- dir	- DMA direction
  */
 ENTRY(xsc3_dma_unmap_area)
-	mov	pc, lr
+	ret	lr
 ENDPROC(xsc3_dma_unmap_area)
 
 	.globl	xsc3_flush_kern_cache_louis
@@ -348,7 +348,7 @@
 	add	r0, r0, #CACHELINESIZE
 	subs	r1, r1, #CACHELINESIZE
 	bhi	1b
-	mov	pc, lr
+	ret	lr
 
 /* =============================== PageTable ============================== */
 
@@ -406,7 +406,7 @@
 	orr	r2, r2, ip
 
 	xscale_set_pte_ext_epilogue
-	mov	pc, lr
+	ret	lr
 
 	.ltorg
 	.align
@@ -446,8 +446,6 @@
 ENDPROC(cpu_xsc3_do_resume)
 #endif
 
-	__CPUINIT
-
 	.type	__xsc3_setup, #function
 __xsc3_setup:
 	mov	r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
@@ -480,7 +478,7 @@
 	bic	r0, r0, r5			@ ..V. ..R. .... ..A.
 	orr	r0, r0, r6			@ ..VI Z..S .... .C.M (mmu)
 						@ ...I Z..S .... .... (uc)
-	mov	pc, lr
+	ret	lr
 
 	.size	__xsc3_setup, . - __xsc3_setup
 
@@ -501,7 +499,7 @@
 
 	.align
 
-	.section ".proc.info.init", #alloc, #execinstr
+	.section ".proc.info.init", #alloc
 
 .macro xsc3_proc_info name:req, cpu_val:req, cpu_mask:req
 	.type	__\name\()_proc_info,#object
@@ -516,7 +514,7 @@
 	.long	PMD_TYPE_SECT | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
-	b	__xsc3_setup
+	initfn	__xsc3_setup, __\name\()_proc_info
 	.long	cpu_arch_name
 	.long	cpu_elf_name
 	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP