--- zzzz-none-000/linux-3.10.107/arch/arm64/mm/cache.S 2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/arm64/mm/cache.S 2021-02-04 17:41:59.000000000 +0000
@@ -17,86 +17,16 @@
* along with this program. If not, see .
*/
+#include
#include
#include
#include
+#include
+#include
#include "proc-macros.S"
/*
- * __flush_dcache_all()
- *
- * Flush the whole D-cache.
- *
- * Corrupted registers: x0-x7, x9-x11
- */
-ENTRY(__flush_dcache_all)
- dsb sy // ensure ordering with previous memory accesses
- mrs x0, clidr_el1 // read clidr
- and x3, x0, #0x7000000 // extract loc from clidr
- lsr x3, x3, #23 // left align loc bit field
- cbz x3, finished // if loc is 0, then no need to clean
- mov x10, #0 // start clean at cache level 0
-loop1:
- add x2, x10, x10, lsr #1 // work out 3x current cache level
- lsr x1, x0, x2 // extract cache type bits from clidr
- and x1, x1, #7 // mask of the bits for current cache only
- cmp x1, #2 // see what cache we have at this level
- b.lt skip // skip if no cache, or just i-cache
- save_and_disable_irqs x9 // make CSSELR and CCSIDR access atomic
- msr csselr_el1, x10 // select current cache level in csselr
- isb // isb to sych the new cssr&csidr
- mrs x1, ccsidr_el1 // read the new ccsidr
- restore_irqs x9
- and x2, x1, #7 // extract the length of the cache lines
- add x2, x2, #4 // add 4 (line length offset)
- mov x4, #0x3ff
- and x4, x4, x1, lsr #3 // find maximum number on the way size
- clz w5, w4 // find bit position of way size increment
- mov x7, #0x7fff
- and x7, x7, x1, lsr #13 // extract max number of the index size
-loop2:
- mov x9, x4 // create working copy of max way size
-loop3:
- lsl x6, x9, x5
- orr x11, x10, x6 // factor way and cache number into x11
- lsl x6, x7, x2
- orr x11, x11, x6 // factor index number into x11
- dc cisw, x11 // clean & invalidate by set/way
- subs x9, x9, #1 // decrement the way
- b.ge loop3
- subs x7, x7, #1 // decrement the index
- b.ge loop2
-skip:
- add x10, x10, #2 // increment cache number
- cmp x3, x10
- b.gt loop1
-finished:
- mov x10, #0 // swith back to cache level 0
- msr csselr_el1, x10 // select current cache level in csselr
- dsb sy
- isb
- ret
-ENDPROC(__flush_dcache_all)
-
-/*
- * flush_cache_all()
- *
- * Flush the entire cache system. The data cache flush is now achieved
- * using atomic clean / invalidates working outwards from L1 cache. This
- * is done using Set/Way based cache maintainance instructions. The
- * instruction cache can still be invalidated back to the point of
- * unification in a single instruction.
- */
-ENTRY(flush_cache_all)
- mov x12, lr
- bl __flush_dcache_all
- mov x0, #0
- ic ialluis // I+BTB cache invalidate
- ret x12
-ENDPROC(flush_cache_all)
-
-/*
* flush_icache_range(start,end)
*
* Ensure that the I and D caches are coherent within specified region.
@@ -128,7 +58,7 @@
add x4, x4, x2
cmp x4, x1
b.lo 1b
- dsb sy
+ dsb ish
icache_line_size x2, x3
sub x3, x2, #1
@@ -138,15 +68,18 @@
add x4, x4, x2
cmp x4, x1
b.lo 1b
-9: // ignore any faulting cache operation
- dsb sy
+ dsb ish
isb
+ mov x0, #0
+ ret
+9:
+ mov x0, #-EFAULT
ret
ENDPROC(flush_icache_range)
ENDPROC(__flush_cache_user_range)
/*
- * __flush_kern_dcache_page(kaddr)
+ * __flush_dcache_area(kaddr, size)
*
* Ensure that the data held in the page kaddr is written back to the
* page in question.
@@ -165,4 +98,103 @@
b.lo 1b
dsb sy
ret
-ENDPROC(__flush_dcache_area)
+ENDPIPROC(__flush_dcache_area)
+
+/*
+ * __inval_cache_range(start, end)
+ * - start - start address of region
+ * - end - end address of region
+ */
+ENTRY(__inval_cache_range)
+ /* FALLTHROUGH */
+
+/*
+ * __dma_inv_range(start, end)
+ * - start - virtual start address of region
+ * - end - virtual end address of region
+ */
+ENTRY(__dma_inv_range)
+ dcache_line_size x2, x3
+ sub x3, x2, #1
+ tst x1, x3 // end cache line aligned?
+ bic x1, x1, x3
+ b.eq 1f
+ dc civac, x1 // clean & invalidate D / U line
+1: tst x0, x3 // start cache line aligned?
+ bic x0, x0, x3
+ b.eq 2f
+ dc civac, x0 // clean & invalidate D / U line
+ b 3f
+2: dc ivac, x0 // invalidate D / U line
+3: add x0, x0, x2
+ cmp x0, x1
+ b.lo 2b
+ dsb sy
+ ret
+ENDPIPROC(__inval_cache_range)
+ENDPROC(__dma_inv_range)
+
+/*
+ * __dma_clean_range(start, end)
+ * - start - virtual start address of region
+ * - end - virtual end address of region
+ */
+ENTRY(__dma_clean_range)
+ dcache_line_size x2, x3
+ sub x3, x2, #1
+ bic x0, x0, x3
+1:
+alternative_if_not ARM64_WORKAROUND_CLEAN_CACHE
+ dc cvac, x0
+alternative_else
+ dc civac, x0
+alternative_endif
+ add x0, x0, x2
+ cmp x0, x1
+ b.lo 1b
+ dsb sy
+ ret
+ENDPROC(__dma_clean_range)
+
+/*
+ * __dma_flush_range(start, end)
+ * - start - virtual start address of region
+ * - end - virtual end address of region
+ */
+ENTRY(__dma_flush_range)
+ dcache_line_size x2, x3
+ sub x3, x2, #1
+ bic x0, x0, x3
+1: dc civac, x0 // clean & invalidate D / U line
+ add x0, x0, x2
+ cmp x0, x1
+ b.lo 1b
+ dsb sy
+ ret
+ENDPIPROC(__dma_flush_range)
+
+/*
+ * __dma_map_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(__dma_map_area)
+ add x1, x1, x0
+ cmp w2, #DMA_FROM_DEVICE
+ b.eq __dma_inv_range
+ b __dma_clean_range
+ENDPIPROC(__dma_map_area)
+
+/*
+ * __dma_unmap_area(start, size, dir)
+ * - start - kernel virtual start address
+ * - size - size of region
+ * - dir - DMA direction
+ */
+ENTRY(__dma_unmap_area)
+ add x1, x1, x0
+ cmp w2, #DMA_TO_DEVICE
+ b.ne __dma_inv_range
+ ret
+ENDPIPROC(__dma_unmap_area)