--- zzzz-none-000/linux-3.10.107/arch/blackfin/mach-bf561/boards/ezkit.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/blackfin/mach-bf561/boards/ezkit.c	2021-02-04 17:41:59.000000000 +0000
@@ -14,6 +14,7 @@
 #include <linux/spi/spi.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/gpio.h>
 #include <linux/delay.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
@@ -25,7 +26,7 @@
  */
 const char bfin_board_name[] = "ADI BF561-EZKIT";
 
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
 #include <linux/usb/isp1760.h>
 static struct resource bfin_isp1760_resources[] = {
 	[0] = {
@@ -60,7 +61,7 @@
 };
 #endif
 
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 #include <linux/usb/isp1362.h>
 
 static struct resource isp1362_hcd_resources[] = {
@@ -101,7 +102,7 @@
 };
 #endif
 
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 static struct resource net2272_bfin_resources[] = {
 	{
 		.start = 0x2C000000,
@@ -129,11 +130,12 @@
  *  USB-LAN EzExtender board
  *  Driver needs to know address, irq and flag pin.
  */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 #include <linux/smc91x.h>
 
 static struct smc91x_platdata smc91x_info = {
-	.flags = SMC91X_USE_32BIT | SMC91X_NOWAIT,
+	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		 SMC91X_NOWAIT,
 	.leda = RPC_LED_100_10,
 	.ledb = RPC_LED_TX_RX,
 };
@@ -163,7 +165,7 @@
 };
 #endif
 
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 static struct resource bfin_uart0_resources[] = {
 	{
@@ -214,7 +216,7 @@
 #endif
 #endif
 
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 static struct resource bfin_sir0_resources[] = {
 	{
@@ -243,7 +245,7 @@
 #endif
 #endif
 
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 static struct mtd_partition ezkit_partitions[] = {
 	{
 		.name       = "bootloader(nor)",
@@ -291,7 +293,7 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
 	[0] = {
@@ -330,8 +332,7 @@
 #endif
 
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
-	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
 	{
 		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -341,7 +342,7 @@
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
 	{
 		.modalias = "spidev",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
@@ -351,7 +352,7 @@
 #endif
 };
 
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 
@@ -375,7 +376,7 @@
 };
 #endif
 
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
 #include <linux/i2c-gpio.h>
 
 static struct i2c_gpio_platform_data i2c_gpio_data = {
@@ -422,8 +423,7 @@
 	},
 };
 
-#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
-	|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
 #include <linux/videodev2.h>
 #include <media/blackfin/bfin_capture.h>
 #include <media/blackfin/ppi.h>
@@ -443,8 +443,7 @@
 	.pin_req = ppi_req,
 };
 
-#if defined(CONFIG_VIDEO_ADV7183) \
-	|| defined(CONFIG_VIDEO_ADV7183_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_ADV7183)
 #include <media/adv7183.h>
 static struct v4l2_input adv7183_inputs[] = {
 	{
@@ -515,7 +514,7 @@
 };
 #endif
 
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 static struct platform_device bfin_i2s = {
 	.name = "bfin-i2s",
 	.id = CONFIG_SND_BF5XX_SPORT_NUM,
@@ -523,15 +522,7 @@
 };
 #endif
 
-#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
-static struct platform_device bfin_tdm = {
-	.name = "bfin-tdm",
-	.id = CONFIG_SND_BF5XX_SPORT_NUM,
-	/* TODO: add platform data here */
-};
-#endif
-
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
 static struct platform_device bfin_ac97 = {
 	.name = "bfin-ac97",
 	.id = CONFIG_SND_BF5XX_SPORT_NUM,
@@ -539,10 +530,9 @@
 };
 #endif
 
-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
-	        || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
 static const char * const ad1836_link[] = {
-	"bfin-tdm.0",
+	"bfin-i2s.0",
 	"spi0.4",
 };
 static struct platform_device bfin_ad1836_machine = {
@@ -558,76 +548,70 @@
 
 	&bfin_dpmc,
 
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 	&smc91x_device,
 #endif
 
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 	&net2272_bfin_device,
 #endif
 
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
 	&bfin_isp1760_device,
 #endif
 
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
 	&bfin_spi0_device,
 #endif
 
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
 #ifdef CONFIG_SERIAL_BFIN_UART0
 	&bfin_uart0_device,
 #endif
 #endif
 
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
 #ifdef CONFIG_BFIN_SIR0
 	&bfin_sir0_device,
 #endif
 #endif
 
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
 	&bfin_device_gpiokeys,
 #endif
 
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
 	&i2c_gpio_device,
 #endif
 
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
 	&isp1362_hcd_device,
 #endif
 
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
 	&ezkit_flash_device,
 #endif
 
-#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
-	|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
 	&bfin_capture_device,
 #endif
 
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
 	&bfin_i2s,
 #endif
 
-#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
-	&bfin_tdm,
-#endif
-
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
 	&bfin_ac97,
 #endif
 
-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
-	defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
 	&bfin_ad1836_machine,
 #endif
 };
 
 static int __init net2272_init(void)
 {
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
 	int ret;
 
 	ret = gpio_request(GPIO_PF11, "net2272");
@@ -653,12 +637,12 @@
 	if (ret < 0)
 		return ret;
 
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 	bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 12));
 	SSYNC();
 #endif
 
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
 	bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 15));
 	bfin_write_FIO0_FLAG_S(1 << 15);
 	SSYNC();