--- zzzz-none-000/linux-3.10.107/arch/blackfin/mach-bf609/Kconfig	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/blackfin/mach-bf609/Kconfig	2021-02-04 17:41:59.000000000 +0000
@@ -9,48 +9,6 @@
 
 menu "BF609 Specific Configuration"
 
-comment "Pin Interrupt to Port Assignment"
-menu "Assignment"
-
-config PINTx_REASSIGN
-	bool "Reprogram PINT Assignment"
-	default y
-	help
-	  The interrupt assignment registers controls the pin-to-interrupt
-	  assignment in a byte-wide manner. Each option allows you to select
-	  a set of pins (High/Low Byte) of an specific Port being mapped
-	  to one of the four PIN Interrupts IRQ_PINTx.
-
-	  You shouldn't change any of these unless you know exactly what you're doing.
-	  Please consult the Blackfin BF60x Processor Hardware Reference Manual.
-
-config PINT0_ASSIGN
-	hex "PINT0_ASSIGN"
-	depends on PINTx_REASSIGN
-	default 0x00000101
-config PINT1_ASSIGN
-	hex "PINT1_ASSIGN"
-	depends on PINTx_REASSIGN
-	default 0x00000101
-config PINT2_ASSIGN
-	hex "PINT2_ASSIGN"
-	depends on PINTx_REASSIGN
-	default 0x00000101
-config PINT3_ASSIGN
-	hex "PINT3_ASSIGN"
-	depends on PINTx_REASSIGN
-	default 0x00000101
-config PINT4_ASSIGN
-	hex "PINT3_ASSIGN"
-	depends on PINTx_REASSIGN
-	default 0x00000101
-config PINT5_ASSIGN
-	hex "PINT3_ASSIGN"
-	depends on PINTx_REASSIGN
-	default 0x00000101
-
-endmenu
-
 config SEC_IRQ_PRIORITY_LEVELS
 	int "SEC interrupt priority levels"
 	default 7
@@ -59,6 +17,1667 @@
 	  Divide the total number of interrupt priority levels into sub-levels.
 	  There is 2 ^ (SEC_IRQ_PRIORITY_LEVELS + 1) different levels.
 
+config L1_PARITY_CHECK
+	bool "Enable L1 parity check"
+	default n
+	help
+	  Enable the L1 parity check in L1 sram. A fault event is raised
+	  when L1 parity error is found.
+
+comment "System Cross Bar Priority Assignment"
+
+config SCB_PRIORITY
+	bool "Init System Cross Bar Priority"
+	default n
+
+menuconfig	SCB0_MI0
+	bool "SCB0 Master Interface 0 (DDR)"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	Core 0	-- 0
+	Core 1	-- 2
+	SCB1	-- 9
+	SCB2	-- 10
+	SCB3	-- 11
+	SCB4	-- 12
+	SCB5	-- 5
+	SCB6	-- 6
+	SCB7	-- 8
+	SCB8	-- 7
+	SCB9	-- 4
+	USB	-- 13
+
+if SCB0_MI0
+
+config SCB0_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 13
+
+config SCB0_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 2
+	range 0 13
+
+config SCB0_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI0_SLOT8
+	int "Slot 8 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI0_SLOT9
+	int "Slot 9 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI0_SLOT10
+	int "Slot 10 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI0_SLOT11
+	int "Slot 11 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI0_SLOT12
+	int "Slot 12 slave interface id"
+	default 0
+	range 0 13
+
+config SCB0_MI0_SLOT13
+	int "Slot 13 slave interface id"
+	default 2
+	range 0 13
+
+config SCB0_MI0_SLOT14
+	int "Slot 14 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI0_SLOT15
+	int "Slot 15 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI0_SLOT16
+	int "Slot 16 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI0_SLOT17
+	int "Slot 17 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI0_SLOT18
+	int "Slot 18 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI0_SLOT19
+	int "Slot 19 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI0_SLOT20
+	int "Slot 20 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI0_SLOT21
+	int "Slot 21 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI0_SLOT22
+	int "Slot 22 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI0_SLOT23
+	int "Slot 23 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI0_SLOT24
+	int "Slot 24 slave interface id"
+	default 0
+	range 0 13
+
+config SCB0_MI0_SLOT25
+	int "Slot 25 slave interface id"
+	default 2
+	range 0 13
+
+config SCB0_MI0_SLOT26
+	int "Slot 26 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI0_SLOT27
+	int "Slot 27 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI0_SLOT28
+	int "Slot 28 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI0_SLOT29
+	int "Slot 29 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI0_SLOT30
+	int "Slot 30 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI0_SLOT31
+	int "Slot 31 slave interface id"
+	default 13
+	range 0 13
+
+endif # SCB0_MI0
+
+menuconfig	SCB0_MI1
+	bool "SCB0 Master Interface 1 (SMC)"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	Core 0	-- 0
+	Core 1	-- 2
+	SCB1	-- 9
+	SCB2	-- 10
+	SCB3	-- 11
+	SCB4	-- 12
+	SCB5	-- 5
+	SCB6	-- 6
+	SCB7	-- 8
+	SCB8	-- 7
+	SCB9	-- 4
+	USB	-- 13
+
+if SCB0_MI1
+
+config SCB0_MI1_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 13
+
+config SCB0_MI1_SLOT1
+	int "Slot 1 slave interface id"
+	default 2
+	range 0 13
+
+config SCB0_MI1_SLOT2
+	int "Slot 2 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI1_SLOT3
+	int "Slot 3 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI1_SLOT4
+	int "Slot 4 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI1_SLOT5
+	int "Slot 5 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI1_SLOT6
+	int "Slot 6 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI1_SLOT7
+	int "Slot 7 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI1_SLOT8
+	int "Slot 8 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI1_SLOT9
+	int "Slot 9 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI1_SLOT10
+	int "Slot 10 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI1_SLOT11
+	int "Slot 11 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI1_SLOT12
+	int "Slot 12 slave interface id"
+	default 0
+	range 0 13
+
+config SCB0_MI1_SLOT13
+	int "Slot 13 slave interface id"
+	default 2
+	range 0 13
+
+config SCB0_MI1_SLOT14
+	int "Slot 14 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI1_SLOT15
+	int "Slot 15 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI1_SLOT16
+	int "Slot 16 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI1_SLOT17
+	int "Slot 17 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI1_SLOT18
+	int "Slot 18 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI1_SLOT19
+	int "Slot 19 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI1_SLOT20
+	int "Slot 20 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI1_SLOT21
+	int "Slot 21 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI1_SLOT22
+	int "Slot 22 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI1_SLOT23
+	int "Slot 23 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI1_SLOT24
+	int "Slot 24 slave interface id"
+	default 0
+	range 0 13
+
+config SCB0_MI1_SLOT25
+	int "Slot 25 slave interface id"
+	default 2
+	range 0 13
+
+config SCB0_MI1_SLOT26
+	int "Slot 26 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI1_SLOT27
+	int "Slot 27 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI1_SLOT28
+	int "Slot 28 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI1_SLOT29
+	int "Slot 29 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI1_SLOT30
+	int "Slot 30 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI1_SLOT31
+	int "Slot 31 slave interface id"
+	default 13
+	range 0 13
+
+endif # SCB0_MI1
+
+menuconfig	SCB0_MI2
+	bool "SCB0 Master Interface 2 (Data L2)"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	Core 0	-- 0
+	Core 1	-- 2
+	SCB1	-- 9
+	SCB2	-- 10
+	SCB3	-- 11
+	SCB4	-- 12
+	SCB5	-- 5
+	SCB6	-- 6
+	SCB7	-- 8
+	SCB8	-- 7
+	SCB9	-- 4
+	USB	-- 13
+
+if SCB0_MI2
+
+config SCB0_MI2_SLOT0
+	int "Slot 0 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI2_SLOT1
+	int "Slot 1 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI2_SLOT2
+	int "Slot 2 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI2_SLOT3
+	int "Slot 3 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI2_SLOT4
+	int "Slot 4 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI2_SLOT5
+	int "Slot 5 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI2_SLOT6
+	int "Slot 6 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI2_SLOT7
+	int "Slot 7 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI2_SLOT8
+	int "Slot 8 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI2_SLOT9
+	int "Slot 9 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI2_SLOT10
+	int "Slot 10 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI2_SLOT11
+	int "Slot 11 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI2_SLOT12
+	int "Slot 12 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI2_SLOT13
+	int "Slot 13 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI2_SLOT14
+	int "Slot 14 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI2_SLOT15
+	int "Slot 15 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI2_SLOT16
+	int "Slot 16 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI2_SLOT17
+	int "Slot 17 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI2_SLOT18
+	int "Slot 18 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI2_SLOT19
+	int "Slot 19 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI2_SLOT20
+	int "Slot 20 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI2_SLOT21
+	int "Slot 21 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI2_SLOT22
+	int "Slot 22 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI2_SLOT23
+	int "Slot 23 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI2_SLOT24
+	int "Slot 24 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI2_SLOT25
+	int "Slot 25 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI2_SLOT26
+	int "Slot 26 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI2_SLOT27
+	int "Slot 27 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI2_SLOT28
+	int "Slot 28 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI2_SLOT29
+	int "Slot 29 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI2_SLOT30
+	int "Slot 30 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI2_SLOT31
+	int "Slot 31 slave interface id"
+	default 7
+	range 0 13
+
+endif # SCB0_MI2
+
+menuconfig	SCB0_MI3
+	bool "SCB0 Master Interface 3 (L1A)"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	Core 0	-- 0
+	Core 1	-- 2
+	SCB1	-- 9
+	SCB2	-- 10
+	SCB3	-- 11
+	SCB4	-- 12
+	SCB5	-- 5
+	SCB6	-- 6
+	SCB7	-- 8
+	SCB8	-- 7
+	SCB9	-- 4
+	USB	-- 13
+
+if SCB0_MI3
+
+config SCB0_MI3_SLOT0
+	int "Slot 0 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI3_SLOT1
+	int "Slot 1 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI3_SLOT2
+	int "Slot 2 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI3_SLOT3
+	int "Slot 3 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI3_SLOT4
+	int "Slot 4 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI3_SLOT5
+	int "Slot 5 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI3_SLOT6
+	int "Slot 6 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI3_SLOT7
+	int "Slot 7 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI3_SLOT8
+	int "Slot 8 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI3_SLOT9
+	int "Slot 9 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI3_SLOT10
+	int "Slot 10 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI3_SLOT11
+	int "Slot 11 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI3_SLOT12
+	int "Slot 12 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI3_SLOT13
+	int "Slot 13 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI3_SLOT14
+	int "Slot 14 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI3_SLOT15
+	int "Slot 15 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI3_SLOT16
+	int "Slot 16 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI3_SLOT17
+	int "Slot 17 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI3_SLOT18
+	int "Slot 18 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI3_SLOT19
+	int "Slot 19 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI3_SLOT20
+	int "Slot 20 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI3_SLOT21
+	int "Slot 21 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI3_SLOT22
+	int "Slot 22 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI3_SLOT23
+	int "Slot 23 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI3_SLOT24
+	int "Slot 24 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI3_SLOT25
+	int "Slot 25 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI3_SLOT26
+	int "Slot 26 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI3_SLOT27
+	int "Slot 27 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI3_SLOT28
+	int "Slot 28 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI3_SLOT29
+	int "Slot 29 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI3_SLOT30
+	int "Slot 30 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI3_SLOT31
+	int "Slot 31 slave interface id"
+	default 7
+	range 0 13
+
+endif # SCB0_MI3
+
+menuconfig	SCB0_MI4
+	bool "SCB0 Master Interface 4 (L1B)"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	Core 0	-- 0
+	Core 1	-- 2
+	SCB1	-- 9
+	SCB2	-- 10
+	SCB3	-- 11
+	SCB4	-- 12
+	SCB5	-- 5
+	SCB6	-- 6
+	SCB7	-- 8
+	SCB8	-- 7
+	SCB9	-- 4
+	USB	-- 13
+
+if SCB0_MI4
+
+config SCB0_MI4_SLOT0
+	int "Slot 0 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI4_SLOT1
+	int "Slot 1 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI4_SLOT2
+	int "Slot 2 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI4_SLOT3
+	int "Slot 3 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI4_SLOT4
+	int "Slot 4 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI4_SLOT5
+	int "Slot 5 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI4_SLOT6
+	int "Slot 6 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI4_SLOT7
+	int "Slot 7 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI4_SLOT8
+	int "Slot 8 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI4_SLOT9
+	int "Slot 9 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI4_SLOT10
+	int "Slot 10 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI4_SLOT11
+	int "Slot 11 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI4_SLOT12
+	int "Slot 12 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI4_SLOT13
+	int "Slot 13 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI4_SLOT14
+	int "Slot 14 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI4_SLOT15
+	int "Slot 15 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI4_SLOT16
+	int "Slot 16 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI4_SLOT17
+	int "Slot 17 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI4_SLOT18
+	int "Slot 18 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI4_SLOT19
+	int "Slot 19 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI4_SLOT20
+	int "Slot 20 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI4_SLOT21
+	int "Slot 21 slave interface id"
+	default 5
+	range 0 13
+
+config SCB0_MI4_SLOT22
+	int "Slot 22 slave interface id"
+	default 6
+	range 0 13
+
+config SCB0_MI4_SLOT23
+	int "Slot 23 slave interface id"
+	default 7
+	range 0 13
+
+config SCB0_MI4_SLOT24
+	int "Slot 24 slave interface id"
+	default 8
+	range 0 13
+
+config SCB0_MI4_SLOT25
+	int "Slot 25 slave interface id"
+	default 9
+	range 0 13
+
+config SCB0_MI4_SLOT26
+	int "Slot 26 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI4_SLOT27
+	int "Slot 27 slave interface id"
+	default 11
+	range 0 13
+
+config SCB0_MI4_SLOT28
+	int "Slot 28 slave interface id"
+	default 13
+	range 0 13
+
+config SCB0_MI4_SLOT29
+	int "Slot 29 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI4_SLOT30
+	int "Slot 30 slave interface id"
+	default 4
+	range 0 13
+
+config SCB0_MI4_SLOT31
+	int "Slot 31 slave interface id"
+	default 7
+	range 0 13
+
+endif # SCB0_MI4
+
+menuconfig	SCB0_MI5
+	bool "SCB0 Master Interface 5 (SMMR)"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	MMR0	-- 1
+	MMR1	-- 3
+	SCB2	-- 10
+	SCB4	-- 12
+
+if SCB0_MI5
+
+config SCB0_MI5_SLOT0
+	int "Slot 0 slave interface id"
+	default 1
+	range 0 13
+
+config SCB0_MI5_SLOT1
+	int "Slot 1 slave interface id"
+	default 3
+	range 0 13
+
+config SCB0_MI5_SLOT2
+	int "Slot 2 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI5_SLOT3
+	int "Slot 3 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI5_SLOT4
+	int "Slot 4 slave interface id"
+	default 1
+	range 0 13
+
+config SCB0_MI5_SLOT5
+	int "Slot 5 slave interface id"
+	default 3
+	range 0 13
+
+config SCB0_MI5_SLOT6
+	int "Slot 6 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI5_SLOT7
+	int "Slot 7 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI5_SLOT8
+	int "Slot 8 slave interface id"
+	default 1
+	range 0 13
+
+config SCB0_MI5_SLOT9
+	int "Slot 9 slave interface id"
+	default 3
+	range 0 13
+
+config SCB0_MI5_SLOT10
+	int "Slot 10 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI5_SLOT11
+	int "Slot 11 slave interface id"
+	default 12
+	range 0 13
+
+config SCB0_MI5_SLOT12
+	int "Slot 12 slave interface id"
+	default 1
+	range 0 13
+
+config SCB0_MI5_SLOT13
+	int "Slot 13 slave interface id"
+	default 3
+	range 0 13
+
+config SCB0_MI5_SLOT14
+	int "Slot 14 slave interface id"
+	default 10
+	range 0 13
+
+config SCB0_MI5_SLOT15
+	int "Slot 15 slave interface id"
+	default 12
+	range 0 13
+
+endif # SCB0_MI5
+
+menuconfig	SCB1_MI0
+	bool "SCB1 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	SPORT0A	-- 0
+	SPORT0B	-- 1
+	SPORT1A	-- 2
+	SPORT1B	-- 3
+	SPORT2A	-- 4
+	SPORT2B	-- 5
+	SPI0TX	-- 6
+	SPI0RX	-- 7
+	SPI1TX	-- 8
+	SPI1RX	-- 9
+
+if SCB1_MI0
+
+config SCB1_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 9
+
+config SCB1_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 9
+
+config SCB1_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 9
+
+config SCB1_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 3
+	range 0 9
+
+config SCB1_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 4
+	range 0 9
+
+config SCB1_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 5
+	range 0 9
+
+config SCB1_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 6
+	range 0 9
+
+config SCB1_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 7
+	range 0 9
+
+config SCB1_MI0_SLOT8
+	int "Slot 8 slave interface id"
+	default 8
+	range 0 9
+
+config SCB1_MI0_SLOT9
+	int "Slot 9 slave interface id"
+	default 9
+	range 0 9
+
+config SCB1_MI0_SLOT10
+	int "Slot 10 slave interface id"
+	default 0
+	range 0 9
+
+config SCB1_MI0_SLOT11
+	int "Slot 11 slave interface id"
+	default 1
+	range 0 9
+
+config SCB1_MI0_SLOT12
+	int "Slot 12 slave interface id"
+	default 2
+	range 0 9
+
+config SCB1_MI0_SLOT13
+	int "Slot 13 slave interface id"
+	default 3
+	range 0 9
+
+config SCB1_MI0_SLOT14
+	int "Slot 14 slave interface id"
+	default 4
+	range 0 9
+
+config SCB1_MI0_SLOT15
+	int "Slot 15 slave interface id"
+	default 5
+	range 0 9
+
+config SCB1_MI0_SLOT16
+	int "Slot 16 slave interface id"
+	default 6
+	range 0 13
+
+config SCB1_MI0_SLOT17
+	int "Slot 17 slave interface id"
+	default 7
+	range 0 13
+
+config SCB1_MI0_SLOT18
+	int "Slot 18 slave interface id"
+	default 8
+	range 0 13
+
+config SCB1_MI0_SLOT19
+	int "Slot 19 slave interface id"
+	default 9
+	range 0 13
+
+endif # SCB1_MI0
+
+menuconfig	SCB2_MI0
+	bool "SCB2 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	RSI	-- 0
+	SDU DMA	-- 1
+	SDU	-- 2
+	EMAC0	-- 3
+	EMAC1	-- 4
+
+if SCB2_MI0
+
+config SCB2_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 4
+
+config SCB2_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 4
+
+config SCB2_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 4
+
+config SCB2_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 3
+	range 0 4
+
+config SCB2_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 4
+	range 0 4
+
+config SCB2_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 0
+	range 0 4
+
+config SCB2_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 1
+	range 0 4
+
+config SCB2_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 2
+	range 0 4
+
+config SCB2_MI0_SLOT8
+	int "Slot 8 slave interface id"
+	default 3
+	range 0 4
+
+config SCB2_MI0_SLOT9
+	int "Slot 9 slave interface id"
+	default 4
+	range 0 4
+
+endif # SCB2_MI0
+
+menuconfig	SCB3_MI0
+	bool "SCB3 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	LP0	-- 0
+	LP1	-- 1
+	LP2	-- 2
+	LP3	-- 3
+	UART0TX	-- 4
+	UART0RX	-- 5
+	UART1TX	-- 4
+	UART1RX	-- 5
+
+if SCB3_MI0
+
+config SCB3_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 7
+
+config SCB3_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 7
+
+config SCB3_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 7
+
+config SCB3_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 3
+	range 0 7
+
+config SCB3_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 4
+	range 0 7
+
+config SCB3_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 5
+	range 0 7
+
+config SCB3_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 6
+	range 0 7
+
+config SCB3_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 7
+	range 0 7
+
+config SCB3_MI0_SLOT8
+	int "Slot 8 slave interface id"
+	default 0
+	range 0 7
+
+config SCB3_MI0_SLOT9
+	int "Slot 9 slave interface id"
+	default 1
+	range 0 7
+
+config SCB3_MI0_SLOT10
+	int "Slot 10 slave interface id"
+	default 2
+	range 0 7
+
+config SCB3_MI0_SLOT11
+	int "Slot 11 slave interface id"
+	default 3
+	range 0 7
+
+config SCB3_MI0_SLOT12
+	int "Slot 12 slave interface id"
+	default 4
+	range 0 7
+
+config SCB3_MI0_SLOT13
+	int "Slot 13 slave interface id"
+	default 5
+	range 0 7
+
+config SCB3_MI0_SLOT14
+	int "Slot 14 slave interface id"
+	default 6
+	range 0 7
+
+config SCB3_MI0_SLOT15
+	int "Slot 15 slave interface id"
+	default 7
+	range 0 7
+
+endif # SCB3_MI0
+
+menuconfig	SCB4_MI0
+	bool "SCB4 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	MDA21	-- 0
+	MDA22	-- 1
+	MDA23	-- 2
+	MDA24	-- 3
+	MDA25	-- 4
+	MDA26	-- 5
+	MDA27	-- 6
+	MDA28	-- 7
+
+if SCB4_MI0
+
+config SCB4_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 7
+
+config SCB4_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 7
+
+config SCB4_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 7
+
+config SCB4_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 3
+	range 0 7
+
+config SCB4_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 4
+	range 0 7
+
+config SCB4_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 5
+	range 0 7
+
+config SCB4_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 6
+	range 0 7
+
+config SCB4_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 7
+	range 0 7
+
+config SCB4_MI0_SLOT8
+	int "Slot 8 slave interface id"
+	default 0
+	range 0 7
+
+config SCB4_MI0_SLOT9
+	int "Slot 9 slave interface id"
+	default 1
+	range 0 7
+
+config SCB4_MI0_SLOT10
+	int "Slot 10 slave interface id"
+	default 2
+	range 0 7
+
+config SCB4_MI0_SLOT11
+	int "Slot 11 slave interface id"
+	default 3
+	range 0 7
+
+config SCB4_MI0_SLOT12
+	int "Slot 12 slave interface id"
+	default 4
+	range 0 7
+
+config SCB4_MI0_SLOT13
+	int "Slot 13 slave interface id"
+	default 5
+	range 0 7
+
+config SCB4_MI0_SLOT14
+	int "Slot 14 slave interface id"
+	default 6
+	range 0 7
+
+config SCB4_MI0_SLOT15
+	int "Slot 15 slave interface id"
+	default 7
+	range 0 7
+
+endif # SCB4_MI0
+
+menuconfig	SCB5_MI0
+	bool "SCB5 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	PPI0 MDA29	-- 0
+	PPI0 MDA30	-- 1
+	PPI2 MDA31	-- 2
+	PPI2 MDA32	-- 3
+
+if SCB5_MI0
+
+config SCB5_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 3
+
+config SCB5_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 3
+
+config SCB5_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 3
+
+config SCB5_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 3
+	range 0 3
+
+config SCB5_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 0
+	range 0 3
+
+config SCB5_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 1
+	range 0 3
+
+config SCB5_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 2
+	range 0 3
+
+config SCB5_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 3
+	range 0 3
+
+endif # SCB5_MI0
+
+menuconfig	SCB6_MI0
+	bool "SCB6 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	PPI1 MDA33	-- 0
+	PPI1 MDA34	-- 1
+
+if SCB6_MI0
+
+config SCB6_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 1
+
+config SCB6_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 1
+
+config SCB6_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 0
+	range 0 1
+
+config SCB6_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 1
+	range 0 1
+
+endif # SCB6_MI0
+
+menuconfig	SCB7_MI0
+	bool "SCB7 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	PIXC0	-- 0
+	PIXC1	-- 1
+	PIXC2	-- 2
+
+if SCB7_MI0
+
+config SCB7_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 2
+
+config SCB7_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 2
+
+config SCB7_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 2
+
+config SCB7_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 0
+	range 0 2
+
+config SCB7_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 1
+	range 0 2
+
+config SCB7_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 2
+	range 0 2
+
+endif # SCB7_MI0
+
+menuconfig	SCB8_MI0
+	bool "SCB8 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	PVP CPDOB	-- 0
+	PVP CPDOC	-- 1
+	PVP CPCO	-- 2
+	PVP CPCI	-- 3
+
+if SCB8_MI0
+
+config SCB8_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 3
+
+config SCB8_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 3
+
+config SCB8_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 3
+
+config SCB8_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 3
+	range 0 3
+
+config SCB8_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 0
+	range 0 3
+
+config SCB8_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 1
+	range 0 3
+
+config SCB8_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 2
+	range 0 3
+
+config SCB8_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 3
+	range 0 3
+
+endif # SCB8_MI0
+
+menuconfig	SCB9_MI0
+	bool "SCB9 Master Interface 0"
+	default n
+	depends on SCB_PRIORITY
+	help
+	The slave interface id of each slot should be set according following table.
+	PVP MPDO	-- 0
+	PVP MPDI	-- 1
+	PVP MPCO	-- 2
+	PVP MPCI	-- 3
+	PVP CPDOA	-- 4
+
+if SCB9_MI0
+
+config SCB9_MI0_SLOT0
+	int "Slot 0 slave interface id"
+	default 0
+	range 0 4
+
+config SCB9_MI0_SLOT1
+	int "Slot 1 slave interface id"
+	default 1
+	range 0 4
+
+config SCB9_MI0_SLOT2
+	int "Slot 2 slave interface id"
+	default 2
+	range 0 4
+
+config SCB9_MI0_SLOT3
+	int "Slot 3 slave interface id"
+	default 3
+	range 0 4
+
+config SCB9_MI0_SLOT4
+	int "Slot 4 slave interface id"
+	default 4
+	range 0 4
+
+config SCB9_MI0_SLOT5
+	int "Slot 5 slave interface id"
+	default 0
+	range 0 4
+
+config SCB9_MI0_SLOT6
+	int "Slot 6 slave interface id"
+	default 1
+	range 0 4
+
+config SCB9_MI0_SLOT7
+	int "Slot 7 slave interface id"
+	default 2
+	range 0 4
+
+config SCB9_MI0_SLOT8
+	int "Slot 8 slave interface id"
+	default 3
+	range 0 4
+
+config SCB9_MI0_SLOT9
+	int "Slot 9 slave interface id"
+	default 4
+	range 0 4
+
+endif # SCB9_MI0
+
 endmenu
 
 endif