--- zzzz-none-000/linux-3.10.107/arch/cris/arch-v10/kernel/time.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/arch/cris/arch-v10/kernel/time.c 2021-02-04 17:41:59.000000000 +0000 @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include @@ -34,7 +33,7 @@ local_irq_save(flags); timer_count = *R_TIMER0_DATA; - presc_count = *R_TIM_PRESC_STATUS; + presc_count = *R_TIM_PRESC_STATUS; /* presc_count might be wrapped */ t1 = *R_TIMER0_DATA; @@ -50,7 +49,7 @@ presc_count = PRESCALE_VALUE - presc_count - PRESCALE_VALUE/2; } - ns = ( (TIMER0_DIV - timer_count) * ((1000000000/HZ)/TIMER0_DIV )) + + ns = ( (TIMER0_DIV - timer_count) * ((1000000000/HZ)/TIMER0_DIV )) + ( (presc_count) * (1000000000/PRESCALE_FREQ)); return ns; } @@ -80,7 +79,7 @@ * by the R_WATCHDOG register. The R_WATCHDOG register contains an enable bit * and a 3-bit key value. The effect of writing to the R_WATCHDOG register is * described in the table below: - * + * * Watchdog Value written: * state: To enable: To key: Operation: * -------- ---------- ------- ---------- @@ -89,15 +88,15 @@ * started 0 ~key Stop watchdog * started 1 ~key Restart watchdog with key = ~key. * started X new_key_val Change key to new_key_val. - * + * * Note: '~' is the bitwise NOT operator. - * + * */ /* right now, starting the watchdog is the same as resetting it */ #define start_watchdog reset_watchdog -#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM) +#ifdef CONFIG_ETRAX_WATCHDOG static int watchdog_key = 0; /* arbitrary number */ #endif @@ -107,10 +106,9 @@ #define WATCHDOG_MIN_FREE_PAGES 8 -void -reset_watchdog(void) +void reset_watchdog(void) { -#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM) +#if defined(CONFIG_ETRAX_WATCHDOG) /* only keep watchdog happy as long as we have memory left! */ if(nr_free_pages() > WATCHDOG_MIN_FREE_PAGES) { /* reset the watchdog with the inverse of the old key */ @@ -123,28 +121,23 @@ /* stop the watchdog - we still need the correct key */ -void -stop_watchdog(void) +void stop_watchdog(void) { -#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM) +#ifdef CONFIG_ETRAX_WATCHDOG watchdog_key ^= 0x7; /* invert key, which is 3 bits */ *R_WATCHDOG = IO_FIELD(R_WATCHDOG, key, watchdog_key) | IO_STATE(R_WATCHDOG, enable, stop); -#endif +#endif } +extern void cris_do_profile(struct pt_regs *regs); + /* * timer_interrupt() needs to keep up the real-time clock, * as well as call the "xtime_update()" routine every clocktick */ - -//static unsigned short myjiff; /* used by our debug routine print_timestamp */ - -extern void cris_do_profile(struct pt_regs *regs); - -static inline irqreturn_t -timer_interrupt(int irq, void *dev_id) +static inline irqreturn_t timer_interrupt(int irq, void *dev_id) { struct pt_regs *regs = get_irq_regs(); /* acknowledge the timer irq */ @@ -160,44 +153,39 @@ IO_STATE( R_TIMER_CTRL, tm0, run) | IO_STATE( R_TIMER_CTRL, clksel0, c6250kHz); #else - *R_TIMER_CTRL = r_timer_ctrl_shadow | - IO_STATE(R_TIMER_CTRL, i0, clr); + *R_TIMER_CTRL = r_timer_ctrl_shadow | IO_STATE(R_TIMER_CTRL, i0, clr); #endif /* reset watchdog otherwise it resets us! */ reset_watchdog(); - + /* Update statistics. */ update_process_times(user_mode(regs)); /* call the real timer interrupt handler */ - xtime_update(1); - + cris_do_profile(regs); /* Save profiling information */ return IRQ_HANDLED; } -/* timer is IRQF_SHARED so drivers can add stuff to the timer irq chain - * it needs to be IRQF_DISABLED to make the jiffies update work properly - */ +/* timer is IRQF_SHARED so drivers can add stuff to the timer irq chain */ static struct irqaction irq2 = { .handler = timer_interrupt, - .flags = IRQF_SHARED | IRQF_DISABLED, + .flags = IRQF_SHARED, .name = "timer", }; -void __init -time_init(void) -{ +void __init time_init(void) +{ arch_gettimeoffset = cris_v10_gettimeoffset; - /* probe for the RTC and read it if it exists - * Before the RTC can be probed the loops_per_usec variable needs - * to be initialized to make usleep work. A better value for - * loops_per_usec is calculated by the kernel later once the - * clock has started. + /* probe for the RTC and read it if it exists + * Before the RTC can be probed the loops_per_usec variable needs + * to be initialized to make usleep work. A better value for + * loops_per_usec is calculated by the kernel later once the + * clock has started. */ loops_per_usec = 50; @@ -208,7 +196,7 @@ * Remember that linux/timex.h contains #defines that rely on the * timer settings below (hz and divide factor) !!! */ - + #ifdef USE_CASCADE_TIMERS *R_TIMER_CTRL = IO_FIELD( R_TIMER_CTRL, timerdiv1, 0) | @@ -219,8 +207,8 @@ IO_STATE( R_TIMER_CTRL, i0, nop) | IO_STATE( R_TIMER_CTRL, tm0, stop_ld) | IO_STATE( R_TIMER_CTRL, clksel0, c6250kHz); - - *R_TIMER_CTRL = r_timer_ctrl_shadow = + + *R_TIMER_CTRL = r_timer_ctrl_shadow = IO_FIELD( R_TIMER_CTRL, timerdiv1, 0) | IO_FIELD( R_TIMER_CTRL, timerdiv0, 0) | IO_STATE( R_TIMER_CTRL, i1, nop) | @@ -230,18 +218,18 @@ IO_STATE( R_TIMER_CTRL, tm0, run) | IO_STATE( R_TIMER_CTRL, clksel0, c6250kHz); #else - *R_TIMER_CTRL = - IO_FIELD(R_TIMER_CTRL, timerdiv1, 192) | + *R_TIMER_CTRL = + IO_FIELD(R_TIMER_CTRL, timerdiv1, 192) | IO_FIELD(R_TIMER_CTRL, timerdiv0, TIMER0_DIV) | - IO_STATE(R_TIMER_CTRL, i1, nop) | + IO_STATE(R_TIMER_CTRL, i1, nop) | IO_STATE(R_TIMER_CTRL, tm1, stop_ld) | IO_STATE(R_TIMER_CTRL, clksel1, c19k2Hz) | IO_STATE(R_TIMER_CTRL, i0, nop) | IO_STATE(R_TIMER_CTRL, tm0, stop_ld) | IO_STATE(R_TIMER_CTRL, clksel0, flexible); - + *R_TIMER_CTRL = r_timer_ctrl_shadow = - IO_FIELD(R_TIMER_CTRL, timerdiv1, 192) | + IO_FIELD(R_TIMER_CTRL, timerdiv1, 192) | IO_FIELD(R_TIMER_CTRL, timerdiv0, TIMER0_DIV) | IO_STATE(R_TIMER_CTRL, i1, nop) | IO_STATE(R_TIMER_CTRL, tm1, run) | @@ -253,16 +241,14 @@ *R_TIMER_PRESCALE = PRESCALE_VALUE; #endif - *R_IRQ_MASK0_SET = - IO_STATE(R_IRQ_MASK0_SET, timer0, set); /* unmask the timer irq */ - - /* now actually register the timer irq handler that calls timer_interrupt() */ - + /* unmask the timer irq */ + *R_IRQ_MASK0_SET = IO_STATE(R_IRQ_MASK0_SET, timer0, set); + + /* now actually register the irq handler that calls timer_interrupt() */ setup_irq(2, &irq2); /* irq 2 is the timer0 irq in etrax */ /* enable watchdog if we should use one */ - -#if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM) +#if defined(CONFIG_ETRAX_WATCHDOG) printk("Enabling watchdog...\n"); start_watchdog(); @@ -275,9 +261,7 @@ driver or infrastructure support yet. */ asm ("setf m"); - *R_IRQ_MASK0_SET = - IO_STATE(R_IRQ_MASK0_SET, watchdog_nmi, set); - *R_VECT_MASK_SET = - IO_STATE(R_VECT_MASK_SET, nmi, set); + *R_IRQ_MASK0_SET = IO_STATE(R_IRQ_MASK0_SET, watchdog_nmi, set); + *R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, nmi, set); #endif }