--- zzzz-none-000/linux-3.10.107/arch/ia64/Kconfig	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/ia64/Kconfig	2021-02-04 17:41:59.000000000 +0000
@@ -1,3 +1,8 @@
+config PGTABLE_LEVELS
+	int "Page Table Levels" if !IA64_PAGE_SIZE_64KB
+	range 3 4 if !IA64_PAGE_SIZE_64KB
+	default 3
+
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
@@ -6,10 +11,12 @@
 
 config IA64
 	bool
+	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_MIGHT_HAVE_PC_SERIO
 	select PCI if (!IA64_HP_SIM)
 	select ACPI if (!IA64_HP_SIM)
-	select PM if (!IA64_HP_SIM)
-	select ARCH_SUPPORTS_MSI
+	select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
+	select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select HAVE_IDE
 	select HAVE_OPROFILE
@@ -19,18 +26,19 @@
 	select HAVE_DYNAMIC_FTRACE if (!ITANIUM)
 	select HAVE_FUNCTION_TRACER
 	select HAVE_DMA_ATTRS
-	select HAVE_KVM
+	select TTY
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DMA_API_DEBUG
-	select HAVE_GENERIC_HARDIRQS
 	select HAVE_MEMBLOCK
 	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_VIRT_CPU_ACCOUNTING
+	select ARCH_HAS_SG_CHAIN
 	select VIRT_TO_BUS
 	select ARCH_DISCARD_MEMBLOCK
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PENDING_IRQ if SMP
 	select GENERIC_IRQ_SHOW
+	select GENERIC_IRQ_LEGACY
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select GENERIC_IOMAP
@@ -43,6 +51,8 @@
 	select SYSCTL_ARCH_UNALIGN_NO_WARN
 	select HAVE_MOD_ARCH_SPECIFIC
 	select MODULES_USE_ELF_RELA
+	select ARCH_USE_CMPXCHG_LOCKREF
+	select HAVE_ARCH_AUDITSYSCALL
 	default y
 	help
 	  The Itanium Processor Family is Intel's 64-bit successor to
@@ -104,6 +114,7 @@
 config DMI
 	bool
 	default y
+	select DMI_SCAN_MACHINE_NON_EFI_FALLBACK
 
 config EFI
 	bool
@@ -126,32 +137,6 @@
 	bool
 	default y
 
-menuconfig PARAVIRT_GUEST
-	bool "Paravirtualized guest support"
-	depends on BROKEN
-	help
-	  Say Y here to get to see options related to running Linux under
-	  various hypervisors.  This option alone does not add any kernel code.
-
-	  If you say N, all options in this submenu will be skipped and disabled.
-
-if PARAVIRT_GUEST
-
-config PARAVIRT
-	bool "Enable paravirtualization code"
-	depends on PARAVIRT_GUEST
-	default y
-	help
-	  This changes the kernel so it can modify itself when it is run
-	  under a hypervisor, potentially improving performance significantly
-	  over full virtualization.  However, when run without a hypervisor
-	  the kernel is theoretically slower and slightly larger.
-
-
-source "arch/ia64/xen/Kconfig"
-
-endif
-
 choice
 	prompt "System type"
 	default IA64_GENERIC
@@ -175,7 +160,6 @@
 	  SGI-SN2		For SGI Altix systems
 	  SGI-UV		For SGI UV systems
 	  Ski-simulator		For the HP simulator <http://www.hpl.hp.com/research/linux/ski/>
-	  Xen-domU		For xen domU system
 
 	  If you don't know what to do, choose "generic".
 
@@ -230,14 +214,7 @@
 config IA64_HP_SIM
 	bool "Ski-simulator"
 	select SWIOTLB
-
-config IA64_XEN_GUEST
-	bool "Xen guest"
-	select SWIOTLB
-	depends on XEN
-	help
-	  Build a kernel that runs on Xen guest domain. At this moment only
-	  16KB page size in supported.
+	depends on !PM
 
 endchoice
 
@@ -292,19 +269,6 @@
 
 endchoice
 
-choice
-	prompt "Page Table Levels"
-	default PGTABLE_3
-
-config PGTABLE_3
-	bool "3 Levels"
-
-config PGTABLE_4
-	depends on !IA64_PAGE_SIZE_64KB
-	bool "4 Levels"
-
-endchoice
-
 if IA64_HP_SIM
 config HZ
 	default 32
@@ -344,7 +308,6 @@
 
 config SMP
 	bool "Symmetric multi-processing support"
-	select USE_GENERIC_SMP_HELPERS
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N.  If you have a system with more
@@ -376,7 +339,6 @@
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
 	depends on SMP
-	select HOTPLUG
 	default n
 	---help---
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
@@ -556,6 +518,7 @@
 config KEXEC
 	bool "kexec system call"
 	depends on !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
+	select KEXEC_CORE
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
@@ -566,9 +529,9 @@
 
 	  It is an ongoing process to be certain the hardware in a machine
 	  is properly shutdown, so do not be surprised if this code does not
-	  initially work for you.  It may help to enable device hotplugging
-	  support.  As of this writing the exact hardware interface is
-	  strongly in flux, so no good recommendation can be made.
+	  initially work for you.  As of this writing the exact hardware
+	  interface is strongly in flux, so no good recommendation can be
+	  made.
 
 config CRASH_DUMP
 	  bool "kernel crash dumps"
@@ -647,8 +610,6 @@
 
 source "crypto/Kconfig"
 
-source "arch/ia64/kvm/Kconfig"
-
 source "lib/Kconfig"
 
 config IOMMU_HELPER