--- zzzz-none-000/linux-3.10.107/arch/mips/Makefile	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/mips/Makefile	2021-02-04 17:41:59.000000000 +0000
@@ -76,6 +76,8 @@
 all-$(CONFIG_BOOT_ELF32)	:= $(vmlinux-32)
 all-$(CONFIG_BOOT_ELF64)	:= $(vmlinux-64)
 all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlinuz
+# Build the DT binary blobs if we have OF configured
+all-$(CONFIG_USE_OF)		+= dtbs
 
 #
 # GCC uses -G 0 -mabicalls -fpic as default.  We don't want PIC in the kernel
@@ -87,11 +89,29 @@
 # machines may also.  Since BFD is incredibly buggy with respect to
 # crossformat linking we rely on the elf2ecoff tool for format conversion.
 #
-cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
+cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely
 cflags-y			+= -msoft-float
-LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
+LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib --gc-sections
+ifdef CONFIG_64BIT
 KBUILD_AFLAGS_MODULE		+= -mlong-calls
 KBUILD_CFLAGS_MODULE		+= -mlong-calls
+else
+KBUILD_AFLAGS_MODULE		+= -mno-long-calls
+KBUILD_CFLAGS_MODULE		+= -mno-long-calls
+endif
+
+ifndef CONFIG_FUNCTION_TRACER
+KBUILD_CFLAGS_KERNEL		+= -ffunction-sections -fdata-sections
+endif
+
+#
+# pass -msoft-float to GAS if it supports it.  However on newer binutils
+# (specifically newer than 2.24.51.20140728) we then also need to explicitly
+# set ".set hardfloat" in all files which manipulate floating point registers.
+#
+ifneq ($(call as-option,-Wa$(comma)-msoft-float,),)
+	cflags-y		+= -DGAS_HAS_SET_HARDFLOAT -Wa,-msoft-float
+endif
 
 cflags-y += -ffreestanding
 
@@ -113,12 +133,8 @@
 cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB $(undef-all) $(predef-be))
 cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL $(undef-all) $(predef-le))
 
-cflags-$(CONFIG_CPU_HAS_SMARTMIPS)	+= $(call cc-option,-msmartmips)
-cflags-$(CONFIG_CPU_MICROMIPS) += $(call cc-option,-mmicromips -mno-jals)
-
 cflags-$(CONFIG_SB1XXX_CORELIS)	+= $(call cc-option,-mno-sched-prolog) \
 				   -fno-omit-frame-pointer
-
 #
 # CPU-dependent compiler/assembler options for optimization.
 #
@@ -133,10 +149,18 @@
 			-Wa,-mips32 -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS32_R2)	+= $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
 			-Wa,-mips32r2 -Wa,--trap
+cflags-$(CONFIG_CPU_24K)	+= $(call cc-option,-march=mips24kc,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
+			-Wa,-mips32r2 -Wa,--trap
+cflags-$(CONFIG_CPU_34K)	+= $(call cc-option,-march=mips34kc,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
+			-Wa,-mips32r2 -Wa,--trap
+cflags-$(CONFIG_CPU_74K)	+= $(call cc-option,-march=mips74kc,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
+			-Wa,-mips32r2 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS32_R6)	+= -march=mips32r6 -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS64_R1)	+= $(call cc-option,-march=mips64,-mips64 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
 			-Wa,-mips64 -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS64_R2)	+= $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
 			-Wa,-mips64r2 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS64_R6)	+= -march=mips64r6 -Wa,--trap
 cflags-$(CONFIG_CPU_R5000)	+= -march=r5000 -Wa,--trap
 cflags-$(CONFIG_CPU_R5432)	+= $(call cc-option,-march=r5400,-march=r5000) \
 			-Wa,--trap
@@ -148,6 +172,8 @@
 			-Wa,--trap
 cflags-$(CONFIG_CPU_SB1)	+= $(call cc-option,-march=sb1,-march=r5000) \
 			-Wa,--trap
+cflags-$(CONFIG_CPU_SB1)	+= $(call cc-option,-mno-mdmx)
+cflags-$(CONFIG_CPU_SB1)	+= $(call cc-option,-mno-mips3d)
 cflags-$(CONFIG_CPU_R8000)	+= -march=r8000 -Wa,--trap
 cflags-$(CONFIG_CPU_R10000)	+= $(call cc-option,-march=r10000,-march=r8000) \
 			-Wa,--trap
@@ -157,16 +183,42 @@
 endif
 cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
 cflags-$(CONFIG_CPU_BMIPS)	+= -march=mips32 -Wa,-mips32 -Wa,--trap
+#
+# binutils from v2.25 on and gcc starting from v4.9.0 treat -march=loongson3a
+# as MIPS64 R1; older versions as just R1.  This leaves the possibility open
+# that GCC might generate R2 code for -march=loongson3a which then is rejected
+# by GAS.  The cc-option can't probe for this behaviour so -march=loongson3a
+# can't easily be used safely within the kbuild framework.
+#
+cflags-$(CONFIG_CPU_LOONGSON3)  +=					\
+	$(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
+	-Wa,-mips64r2 -Wa,--trap
 
 cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)	+= $(call cc-option,-mfix-r4000,)
 cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)	+= $(call cc-option,-mfix-r4400,)
 cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS)	+= $(call cc-option,-mno-daddi,)
 
-ifdef CONFIG_CPU_SB1
-ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
-KBUILD_AFLAGS_MODULE += -msb1-pass1-workarounds
-KBUILD_CFLAGS_MODULE += -msb1-pass1-workarounds
-endif
+# For smartmips configurations, there are hundreds of warnings due to ISA overrides
+# in assembly and header files. smartmips is only supported for MIPS32r1 onwards
+# and there is no support for 64-bit. Various '.set mips2' or '.set mips3' or
+# similar directives in the kernel will spam the build logs with the following warnings:
+# Warning: the `smartmips' extension requires MIPS32 revision 1 or greater
+# or
+# Warning: the 64-bit MIPS architecture does not support the `smartmips' extension
+# Pass -Wa,--no-warn to disable all assembler warnings until the kernel code has
+# been fixed properly.
+mips-cflags				:= $(cflags-y)
+ifeq ($(CONFIG_CPU_HAS_SMARTMIPS),y)
+smartmips-ase				:= $(call cc-option-yn,$(mips-cflags) -msmartmips)
+cflags-$(smartmips-ase)			+= -msmartmips -Wa,--no-warn
+endif
+ifeq ($(CONFIG_CPU_MICROMIPS),y)
+micromips-ase				:= $(call cc-option-yn,$(mips-cflags) -mmicromips)
+cflags-$(micromips-ase)			+= -mmicromips
+endif
+ifeq ($(CONFIG_CPU_HAS_MSA),y)
+toolchain-msa				:= $(call cc-option-yn,$(mips-cflags) -mhard-float -mfp64 -Wa$(comma)-mmsa)
+cflags-$(toolchain-msa)			+= -DTOOLCHAIN_SUPPORTS_MSA
 endif
 
 #
@@ -174,9 +226,12 @@
 #
 libs-$(CONFIG_FW_ARC)		+= arch/mips/fw/arc/
 libs-$(CONFIG_FW_CFE)		+= arch/mips/fw/cfe/
+libs-$(CONFIG_MYLOADER)		+= arch/mips/fw/myloader/
 libs-$(CONFIG_FW_SNIPROM)	+= arch/mips/fw/sni/
 libs-y				+= arch/mips/fw/lib/
 
+libs-$(CONFIG_AVM_ENHANCED)  += arch/mips/avm_enh/
+
 #
 # Kernel compression
 #
@@ -189,11 +244,13 @@
 #
 # Board-dependent options and extra files
 #
-include $(srctree)/arch/mips/Kbuild.platforms
+include arch/mips/Kbuild.platforms
 
 ifdef CONFIG_PHYSICAL_START
 load-y					= $(CONFIG_PHYSICAL_START)
 endif
+entry-y				= 0x$(shell $(NM) vmlinux 2>/dev/null \
+					| grep "\bkernel_entry\b" | cut -f1 -d \ )
 
 cflags-y			+= -I$(srctree)/arch/mips/include/asm/mach-generic
 drivers-$(CONFIG_PCI)		+= arch/mips/pci/
@@ -225,12 +282,15 @@
 KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y)
 KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
 
+bootvars-y	= VMLINUX_LOAD_ADDRESS=$(load-y) \
+		  VMLINUX_ENTRY_ADDRESS=$(entry-y)
+
 LDFLAGS			+= -m $(ld-emul)
 
 ifdef CONFIG_MIPS
 CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \
 	egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \
-	sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/")
+	sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/" -e 's/\$$/&&/g')
 ifdef CONFIG_64BIT
 CHECKFLAGS		+= -m64
 endif
@@ -241,6 +301,7 @@
 head-y := arch/mips/kernel/head.o
 
 libs-y			+= arch/mips/lib/
+libs-$(CONFIG_MIPS_FPU_EMULATOR)	+= arch/mips/math-emu/
 
 # See arch/mips/Kbuild for content of core part of the kernel
 core-y += arch/mips/
@@ -250,9 +311,29 @@
 # suspend and hibernation support
 drivers-$(CONFIG_PM)	+= arch/mips/power/
 
+# boot image targets (arch/mips/boot/)
+boot-y			:= vmlinux.bin
+boot-y			+= vmlinux.ecoff
+boot-y			+= vmlinux.srec
+ifeq ($(shell expr $(load-y) \< 0xffffffff80000000 2> /dev/null), 0)
+boot-y			+= uImage
+boot-y			+= uImage.bin
+boot-y			+= uImage.bz2
+boot-y			+= uImage.gz
+boot-y			+= uImage.lzma
+boot-y			+= uImage.lzo
+endif
+
+# compressed boot image targets (arch/mips/boot/compressed/)
+bootz-y			:= vmlinuz
+bootz-y			+= vmlinuz.bin
+bootz-y			+= vmlinuz.ecoff
+bootz-y			+= vmlinuz.srec
+
 ifdef CONFIG_LASAT
 rom.bin rom.sw: vmlinux
-	$(Q)$(MAKE) $(build)=arch/mips/lasat/image $@
+	$(Q)$(MAKE) $(build)=arch/mips/lasat/image \
+		$(bootvars-y) $@
 endif
 
 #
@@ -260,33 +341,55 @@
 # Other need ECOFF, so we build a 32-bit ELF binary for them which we then
 # convert to ECOFF using elf2ecoff.
 #
+quiet_cmd_32 = OBJCOPY $@
+	cmd_32 = $(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
 vmlinux.32: vmlinux
-	$(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
-
-
-#obj-$(CONFIG_KPROBES)		+= kprobes.o
+	$(call cmd,32)
 
 #
 # The 64-bit ELF tools are pretty broken so at this time we generate 64-bit
 # ELF files from 32-bit files by conversion.
 #
+quiet_cmd_64 = OBJCOPY $@
+	cmd_64 = $(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@
 vmlinux.64: vmlinux
-	$(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@
+	$(call cmd,64)
 
 all:	$(all-y)
 
 # boot
-vmlinux.bin vmlinux.ecoff vmlinux.srec: $(vmlinux-32) FORCE
-	$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) arch/mips/boot/$@
+$(boot-y): $(vmlinux-32) FORCE
+	$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) \
+		$(bootvars-y) arch/mips/boot/$@
 
+ifdef CONFIG_SYS_SUPPORTS_ZBOOT
 # boot/compressed
-vmlinuz vmlinuz.bin vmlinuz.ecoff vmlinuz.srec: $(vmlinux-32) FORCE
+$(bootz-y): $(vmlinux-32) FORCE
 	$(Q)$(MAKE) $(build)=arch/mips/boot/compressed \
-	   VMLINUX_LOAD_ADDRESS=$(load-y) 32bit-bfd=$(32bit-bfd) $@
+		$(bootvars-y) 32bit-bfd=$(32bit-bfd) $@
+else
+vmlinuz: FORCE
+	@echo '   CONFIG_SYS_SUPPORTS_ZBOOT is not enabled'
+	/bin/false
+endif
 
 
 CLEAN_FILES += vmlinux.32 vmlinux.64
 
+# device-trees
+core-$(CONFIG_BUILTIN_DTB) += arch/mips/boot/dts/
+
+%.dtb %.dtb.S %.dtb.o: | scripts
+	$(Q)$(MAKE) $(build)=arch/mips/boot/dts arch/mips/boot/dts/$@
+
+PHONY += dtbs
+dtbs: scripts
+	$(Q)$(MAKE) $(build)=arch/mips/boot/dts
+
+PHONY += dtbs_install
+dtbs_install:
+	$(Q)$(MAKE) $(dtbinst)=arch/mips/boot/dts
+
 archprepare:
 ifdef CONFIG_MIPS32_N32
 	@echo '  Checking missing-syscalls for N32'
@@ -315,10 +418,19 @@
 	echo '  vmlinux.ecoff        - ECOFF boot image'
 	echo '  vmlinux.bin          - Raw binary boot image'
 	echo '  vmlinux.srec         - SREC boot image'
+	echo '  vmlinux.32           - 64-bit boot image wrapped in 32bits (IP22/IP32)'
 	echo '  vmlinuz              - Compressed boot(zboot) image'
 	echo '  vmlinuz.ecoff        - ECOFF zboot image'
 	echo '  vmlinuz.bin          - Raw binary zboot image'
 	echo '  vmlinuz.srec         - SREC zboot image'
+	echo '  uImage               - U-Boot image'
+	echo '  uImage.bin           - U-Boot image (uncompressed)'
+	echo '  uImage.bz2           - U-Boot image (bz2)'
+	echo '  uImage.gz            - U-Boot image (gzip)'
+	echo '  uImage.lzma          - U-Boot image (lzma)'
+	echo '  uImage.lzo           - U-Boot image (lzo)'
+	echo '  dtbs                 - Device-tree blobs for enabled boards'
+	echo '  dtbs_install         - Install dtbs to $(INSTALL_DTBS_PATH)'
 	echo
 	echo '  These will be default as appropriate for a configured platform.'
 endef