--- zzzz-none-000/linux-3.10.107/arch/mips/bcm63xx/prom.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/arch/mips/bcm63xx/prom.c 2021-02-04 17:41:59.000000000 +0000 @@ -8,12 +8,15 @@ #include #include +#include #include +#include +#include +#include #include #include #include #include -#include void __init prom_init(void) { @@ -26,7 +29,9 @@ bcm_wdt_writel(WDT_STOP_2, WDT_CTL_REG); /* disable all hardware blocks clock for now */ - if (BCMCPU_IS_6328()) + if (BCMCPU_IS_3368()) + mask = CKCTL_3368_ALL_SAFE_EN; + else if (BCMCPU_IS_6328()) mask = CKCTL_6328_ALL_SAFE_EN; else if (BCMCPU_IS_6338()) mask = CKCTL_6338_ALL_SAFE_EN; @@ -47,11 +52,47 @@ reg &= ~mask; bcm_perf_writel(reg, PERF_CKCTL_REG); - /* register gpiochip */ - bcm63xx_gpio_init(); - /* do low level board init */ board_prom_init(); + + /* set up SMP */ + if (!register_bmips_smp_ops()) { + /* + * BCM6328 might not have its second CPU enabled, while BCM3368 + * and BCM6358 need special handling for their shared TLB, so + * disable SMP for now. + */ + if (BCMCPU_IS_6328()) { + reg = bcm_readl(BCM_6328_OTP_BASE + + OTP_USER_BITS_6328_REG(3)); + + if (reg & OTP_6328_REG3_TP1_DISABLED) + bmips_smp_enabled = 0; + } else if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) { + bmips_smp_enabled = 0; + } + + if (!bmips_smp_enabled) + return; + + /* + * The bootloader has set up the CPU1 reset vector at + * 0xa000_0200. + * This conflicts with the special interrupt vector (IV). + * The bootloader has also set up CPU1 to respond to the wrong + * IPI interrupt. + * Here we will start up CPU1 in the background and ask it to + * reconfigure itself then go back to sleep. + */ + memcpy((void *)0xa0000200, &bmips_smp_movevec, 0x20); + __sync(); + set_c0_cause(C_SW0); + cpumask_set_cpu(1, &bmips_booted_mask); + + /* + * FIXME: we really should have some sort of hazard barrier here + */ + } } void __init prom_free_prom_memory(void)