--- zzzz-none-000/linux-3.10.107/arch/mips/lantiq/xway/sysctrl.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/arch/mips/lantiq/xway/sysctrl.c 2021-02-04 17:41:59.000000000 +0000 @@ -4,11 +4,13 @@ * by the Free Software Foundation. * * Copyright (C) 2011-2012 John Crispin + * Copyright (C) 2013-2015 Lantiq Beteiligungs-GmbH & Co.KG */ #include #include #include +#include #include #include #include @@ -18,16 +20,18 @@ #include "../clk.h" #include "../prom.h" -/* clock control register */ +/* clock control register for legacy */ #define CGU_IFCCR 0x0018 #define CGU_IFCCR_VR9 0x0024 -/* system clock register */ +/* system clock register for legacy */ #define CGU_SYS 0x0010 /* pci control register */ #define CGU_PCICR 0x0034 #define CGU_PCICR_VR9 0x0038 /* ephy configuration register */ #define CGU_EPHY 0x10 + +/* Legacy PMU register for ar9, ase, danube */ /* power control register */ #define PMU_PWDCR 0x1C /* power status register */ @@ -41,13 +45,56 @@ /* power status register */ #define PWDSR(x) ((x) ? (PMU_PWDSR1) : (PMU_PWDSR)) + +/* PMU register for ar10 and grx390 */ + +/* First register set */ +#define PMU_CLK_SR 0x20 /* status */ +#define PMU_CLK_CR_A 0x24 /* Enable */ +#define PMU_CLK_CR_B 0x28 /* Disable */ +/* Second register set */ +#define PMU_CLK_SR1 0x30 /* status */ +#define PMU_CLK_CR1_A 0x34 /* Enable */ +#define PMU_CLK_CR1_B 0x38 /* Disable */ +/* Third register set */ +#define PMU_ANA_SR 0x40 /* status */ +#define PMU_ANA_CR_A 0x44 /* Enable */ +#define PMU_ANA_CR_B 0x48 /* Disable */ + +/* Status */ +static u32 pmu_clk_sr[] = { + PMU_CLK_SR, + PMU_CLK_SR1, + PMU_ANA_SR, +}; + +/* Enable */ +static u32 pmu_clk_cr_a[] = { + PMU_CLK_CR_A, + PMU_CLK_CR1_A, + PMU_ANA_CR_A, +}; + +/* Disable */ +static u32 pmu_clk_cr_b[] = { + PMU_CLK_CR_B, + PMU_CLK_CR1_B, + PMU_ANA_CR_B, +}; + +#define PWDCR_EN_XRX(x) (pmu_clk_cr_a[(x)]) +#define PWDCR_DIS_XRX(x) (pmu_clk_cr_b[(x)]) +#define PWDSR_XRX(x) (pmu_clk_sr[(x)]) + /* clock gates that we can en/disable */ #define PMU_USB0_P BIT(0) +#define PMU_ASE_SDIO BIT(2) /* ASE special */ #define PMU_PCI BIT(4) #define PMU_DMA BIT(5) #define PMU_USB0 BIT(6) #define PMU_ASC0 BIT(7) #define PMU_EPHY BIT(7) /* ase */ +#define PMU_USIF BIT(7) /* from vr9 until grx390 */ #define PMU_SPI BIT(8) #define PMU_DFE BIT(9) #define PMU_EBU BIT(10) @@ -56,12 +103,15 @@ #define PMU_AHBS BIT(13) /* vr9 */ #define PMU_FPI BIT(14) #define PMU_AHBM BIT(15) +#define PMU_SDIO BIT(16) /* danube, ar9, vr9 */ #define PMU_ASC1 BIT(17) #define PMU_PPE_QSB BIT(18) #define PMU_PPE_SLL01 BIT(19) +#define PMU_DEU BIT(20) #define PMU_PPE_TC BIT(21) #define PMU_PPE_EMA BIT(22) #define PMU_PPE_DPLUM BIT(23) +#define PMU_PPE_DP BIT(23) #define PMU_PPE_DPLUS BIT(24) #define PMU_USB1_P BIT(26) #define PMU_USB1 BIT(27) @@ -70,30 +120,59 @@ #define PMU_GPHY BIT(30) #define PMU_PCIE_CLK BIT(31) -#define PMU1_PCIE_PHY BIT(0) +#define PMU1_PCIE_PHY BIT(0) /* vr9-specific,moved in ar10/grx390 */ #define PMU1_PCIE_CTL BIT(1) #define PMU1_PCIE_PDI BIT(4) #define PMU1_PCIE_MSI BIT(5) +#define PMU1_CKE BIT(6) +#define PMU1_PCIE1_CTL BIT(17) +#define PMU1_PCIE1_PDI BIT(20) +#define PMU1_PCIE1_MSI BIT(21) +#define PMU1_PCIE2_CTL BIT(25) +#define PMU1_PCIE2_PDI BIT(26) +#define PMU1_PCIE2_MSI BIT(27) + +#define PMU_ANALOG_USB0_P BIT(0) +#define PMU_ANALOG_USB1_P BIT(1) +#define PMU_ANALOG_PCIE0_P BIT(8) +#define PMU_ANALOG_PCIE1_P BIT(9) +#define PMU_ANALOG_PCIE2_P BIT(10) +#define PMU_ANALOG_DSL_AFE BIT(16) +#define PMU_ANALOG_DCDC_2V5 BIT(17) +#define PMU_ANALOG_DCDC_1VX BIT(18) +#define PMU_ANALOG_DCDC_1V0 BIT(19) #define pmu_w32(x, y) ltq_w32((x), pmu_membase + (y)) #define pmu_r32(x) ltq_r32(pmu_membase + (x)) +#define XBAR_ALWAYS_LAST 0x430 +#define XBAR_FPI_BURST_EN BIT(1) +#define XBAR_AHB_BURST_EN BIT(2) + +#define xbar_w32(x, y) ltq_w32((x), ltq_xbar_membase + (y)) +#define xbar_r32(x) ltq_r32(ltq_xbar_membase + (x)) + static void __iomem *pmu_membase; +static void __iomem *ltq_xbar_membase; void __iomem *ltq_cgu_membase; void __iomem *ltq_ebu_membase; static u32 ifccr = CGU_IFCCR; static u32 pcicr = CGU_PCICR; +static DEFINE_SPINLOCK(g_pmu_lock); + /* legacy function kept alive to ease clkdev transition */ void ltq_pmu_enable(unsigned int module) { - int err = 1000000; + int retry = 1000000; + spin_lock(&g_pmu_lock); pmu_w32(pmu_r32(PMU_PWDCR) & ~module, PMU_PWDCR); - do {} while (--err && (pmu_r32(PMU_PWDSR) & module)); + do {} while (--retry && (pmu_r32(PMU_PWDSR) & module)); + spin_unlock(&g_pmu_lock); - if (!err) + if (!retry) panic("activating PMU module failed!"); } EXPORT_SYMBOL(ltq_pmu_enable); @@ -101,7 +180,15 @@ /* legacy function kept alive to ease clkdev transition */ void ltq_pmu_disable(unsigned int module) { + int retry = 1000000; + + spin_lock(&g_pmu_lock); pmu_w32(pmu_r32(PMU_PWDCR) | module, PMU_PWDCR); + do {} while (--retry && (!(pmu_r32(PMU_PWDSR) & module))); + spin_unlock(&g_pmu_lock); + + if (!retry) + pr_warn("deactivating PMU module failed!"); } EXPORT_SYMBOL(ltq_pmu_disable); @@ -123,12 +210,23 @@ { int retry = 1000000; - pmu_w32(pmu_r32(PWDCR(clk->module)) & ~clk->bits, - PWDCR(clk->module)); - do {} while (--retry && (pmu_r32(PWDSR(clk->module)) & clk->bits)); + if (of_machine_is_compatible("lantiq,ar10") + || of_machine_is_compatible("lantiq,grx390")) { + pmu_w32(clk->bits, PWDCR_EN_XRX(clk->module)); + do {} while (--retry && + (!(pmu_r32(PWDSR_XRX(clk->module)) & clk->bits))); + + } else { + spin_lock(&g_pmu_lock); + pmu_w32(pmu_r32(PWDCR(clk->module)) & ~clk->bits, + PWDCR(clk->module)); + do {} while (--retry && + (pmu_r32(PWDSR(clk->module)) & clk->bits)); + spin_unlock(&g_pmu_lock); + } if (!retry) - panic("activating PMU module failed!\n"); + panic("activating PMU module failed!"); return 0; } @@ -136,8 +234,24 @@ /* disable a clock gate */ static void pmu_disable(struct clk *clk) { - pmu_w32(pmu_r32(PWDCR(clk->module)) | clk->bits, - PWDCR(clk->module)); + int retry = 1000000; + + if (of_machine_is_compatible("lantiq,ar10") + || of_machine_is_compatible("lantiq,grx390")) { + pmu_w32(clk->bits, PWDCR_DIS_XRX(clk->module)); + do {} while (--retry && + (pmu_r32(PWDSR_XRX(clk->module)) & clk->bits)); + } else { + spin_lock(&g_pmu_lock); + pmu_w32(pmu_r32(PWDCR(clk->module)) | clk->bits, + PWDCR(clk->module)); + do {} while (--retry && + (!(pmu_r32(PWDSR(clk->module)) & clk->bits))); + spin_unlock(&g_pmu_lock); + } + + if (!retry) + pr_warn("deactivating PMU module failed!"); } /* the pci enable helper */ @@ -179,6 +293,16 @@ ltq_cgu_w32((1 << 31) | (1 << 30), pcicr); } +static void xbar_fpi_burst_disable(void) +{ + u32 reg; + + /* bit 1 as 1 --burst; bit 1 as 0 -- single */ + reg = xbar_r32(XBAR_ALWAYS_LAST); + reg &= ~XBAR_FPI_BURST_EN; + xbar_w32(reg, XBAR_ALWAYS_LAST); +} + /* enable a clockout source */ static int clkout_enable(struct clk *clk) { @@ -202,8 +326,8 @@ } /* manage the clock gates via PMU */ -static void clkdev_add_pmu(const char *dev, const char *con, - unsigned int module, unsigned int bits) +static void clkdev_add_pmu(const char *dev, const char *con, bool deactivate, + unsigned int module, unsigned int bits) { struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); @@ -214,6 +338,13 @@ clk->disable = pmu_disable; clk->module = module; clk->bits = bits; + if (deactivate) { + /* + * Disable it during the initialization. Module should enable + * when used + */ + pmu_disable(clk); + } clkdev_add(&clk->cl); } @@ -312,13 +443,13 @@ of_address_to_resource(np_ebu, 0, &res_ebu)) panic("Failed to get core resources"); - if ((request_mem_region(res_pmu.start, resource_size(&res_pmu), - res_pmu.name) < 0) || - (request_mem_region(res_cgu.start, resource_size(&res_cgu), - res_cgu.name) < 0) || - (request_mem_region(res_ebu.start, resource_size(&res_ebu), - res_ebu.name) < 0)) - pr_err("Failed to request core reources"); + if (!request_mem_region(res_pmu.start, resource_size(&res_pmu), + res_pmu.name) || + !request_mem_region(res_cgu.start, resource_size(&res_cgu), + res_cgu.name) || + !request_mem_region(res_ebu.start, resource_size(&res_ebu), + res_ebu.name)) + pr_err("Failed to request core resources"); pmu_membase = ioremap_nocache(res_pmu.start, resource_size(&res_pmu)); ltq_cgu_membase = ioremap_nocache(res_cgu.start, @@ -328,17 +459,37 @@ if (!pmu_membase || !ltq_cgu_membase || !ltq_ebu_membase) panic("Failed to remap core resources"); + if (of_machine_is_compatible("lantiq,vr9")) { + struct resource res_xbar; + struct device_node *np_xbar = + of_find_compatible_node(NULL, NULL, + "lantiq,xbar-xway"); + + if (!np_xbar) + panic("Failed to load xbar nodes from devicetree"); + if (of_address_to_resource(np_pmu, 0, &res_xbar)) + panic("Failed to get xbar resources"); + if (request_mem_region(res_xbar.start, resource_size(&res_xbar), + res_xbar.name) < 0) + panic("Failed to get xbar resources"); + + ltq_xbar_membase = ioremap_nocache(res_xbar.start, + resource_size(&res_xbar)); + if (!ltq_xbar_membase) + panic("Failed to remap xbar resources"); + } + /* make sure to unprotect the memory region where flash is located */ ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0); /* add our generic xway clocks */ - clkdev_add_pmu("10000000.fpi", NULL, 0, PMU_FPI); - clkdev_add_pmu("1e100400.serial", NULL, 0, PMU_ASC0); - clkdev_add_pmu("1e100a00.gptu", NULL, 0, PMU_GPT); - clkdev_add_pmu("1e100bb0.stp", NULL, 0, PMU_STP); - clkdev_add_pmu("1e104100.dma", NULL, 0, PMU_DMA); - clkdev_add_pmu("1e100800.spi", NULL, 0, PMU_SPI); - clkdev_add_pmu("1e105300.ebu", NULL, 0, PMU_EBU); + clkdev_add_pmu("10000000.fpi", NULL, 0, 0, PMU_FPI); + clkdev_add_pmu("1e100400.serial", NULL, 0, 0, PMU_ASC0); + clkdev_add_pmu("1e100a00.gptu", NULL, 1, 0, PMU_GPT); + clkdev_add_pmu("1e100bb0.stp", NULL, 1, 0, PMU_STP); + clkdev_add_pmu("1e104100.dma", NULL, 1, 0, PMU_DMA); + clkdev_add_pmu("1e100800.spi", NULL, 1, 0, PMU_SPI); + clkdev_add_pmu("1e105300.ebu", NULL, 0, 0, PMU_EBU); clkdev_add_clkout(); /* add the soc dependent clocks */ @@ -346,14 +497,30 @@ ifccr = CGU_IFCCR_VR9; pcicr = CGU_PCICR_VR9; } else { - clkdev_add_pmu("1e180000.etop", NULL, 0, PMU_PPE); + clkdev_add_pmu("1e180000.etop", NULL, 1, 0, PMU_PPE); } if (!of_machine_is_compatible("lantiq,ase")) { - clkdev_add_pmu("1e100c00.serial", NULL, 0, PMU_ASC1); + clkdev_add_pmu("1e100c00.serial", NULL, 0, 0, PMU_ASC1); clkdev_add_pci(); } + if (of_machine_is_compatible("lantiq,grx390") || + of_machine_is_compatible("lantiq,ar10")) { + clkdev_add_pmu("1e101000.usb", "phy", 1, 2, PMU_ANALOG_USB0_P); + clkdev_add_pmu("1e106000.usb", "phy", 1, 2, PMU_ANALOG_USB1_P); + /* rc 0 */ + clkdev_add_pmu("1d900000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE0_P); + clkdev_add_pmu("1d900000.pcie", "msi", 1, 1, PMU1_PCIE_MSI); + clkdev_add_pmu("1d900000.pcie", "pdi", 1, 1, PMU1_PCIE_PDI); + clkdev_add_pmu("1d900000.pcie", "ctl", 1, 1, PMU1_PCIE_CTL); + /* rc 1 */ + clkdev_add_pmu("19000000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE1_P); + clkdev_add_pmu("19000000.pcie", "msi", 1, 1, PMU1_PCIE1_MSI); + clkdev_add_pmu("19000000.pcie", "pdi", 1, 1, PMU1_PCIE1_PDI); + clkdev_add_pmu("19000000.pcie", "ctl", 1, 1, PMU1_PCIE1_CTL); + } + if (of_machine_is_compatible("lantiq,ase")) { if (ltq_cgu_r32(CGU_SYS) & (1 << 5)) clkdev_add_static(CLOCK_266M, CLOCK_133M, @@ -361,28 +528,84 @@ else clkdev_add_static(CLOCK_133M, CLOCK_133M, CLOCK_133M, CLOCK_133M); - clkdev_add_cgu("1e180000.etop", "ephycgu", CGU_EPHY), - clkdev_add_pmu("1e180000.etop", "ephy", 0, PMU_EPHY); + clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0); + clkdev_add_pmu("1e101000.usb", "phy", 1, 0, PMU_USB0_P); + clkdev_add_pmu("1e180000.etop", "ppe", 1, 0, PMU_PPE); + clkdev_add_cgu("1e180000.etop", "ephycgu", CGU_EPHY); + clkdev_add_pmu("1e180000.etop", "ephy", 1, 0, PMU_EPHY); + clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_ASE_SDIO); + clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); + } else if (of_machine_is_compatible("lantiq,grx390")) { + clkdev_add_static(ltq_grx390_cpu_hz(), ltq_grx390_fpi_hz(), + ltq_grx390_fpi_hz(), ltq_grx390_pp32_hz()); + clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0); + clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1); + /* rc 2 */ + clkdev_add_pmu("1a800000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE2_P); + clkdev_add_pmu("1a800000.pcie", "msi", 1, 1, PMU1_PCIE2_MSI); + clkdev_add_pmu("1a800000.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI); + clkdev_add_pmu("1a800000.pcie", "ctl", 1, 1, PMU1_PCIE2_CTL); + clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP); + clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); + clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); + } else if (of_machine_is_compatible("lantiq,ar10")) { + clkdev_add_static(ltq_ar10_cpu_hz(), ltq_ar10_fpi_hz(), + ltq_ar10_fpi_hz(), ltq_ar10_pp32_hz()); + clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0); + clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1); + clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH | + PMU_PPE_DP | PMU_PPE_TC); + clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); + clkdev_add_pmu("1f203000.rcu", "gphy", 1, 0, PMU_GPHY); + clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); + clkdev_add_pmu("1e116000.mei", "afe", 1, 2, PMU_ANALOG_DSL_AFE); + clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); } else if (of_machine_is_compatible("lantiq,vr9")) { clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(), ltq_vr9_fpi_hz(), ltq_vr9_pp32_hz()); - clkdev_add_pmu("1d900000.pcie", "phy", 1, PMU1_PCIE_PHY); - clkdev_add_pmu("1d900000.pcie", "bus", 0, PMU_PCIE_CLK); - clkdev_add_pmu("1d900000.pcie", "msi", 1, PMU1_PCIE_MSI); - clkdev_add_pmu("1d900000.pcie", "pdi", 1, PMU1_PCIE_PDI); - clkdev_add_pmu("1d900000.pcie", "ctl", 1, PMU1_PCIE_CTL); - clkdev_add_pmu("1d900000.pcie", "ahb", 0, PMU_AHBM | PMU_AHBS); - clkdev_add_pmu("1e108000.eth", NULL, 0, + clkdev_add_pmu("1e101000.usb", "phy", 1, 0, PMU_USB0_P); + clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0 | PMU_AHBM); + clkdev_add_pmu("1e106000.usb", "phy", 1, 0, PMU_USB1_P); + clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1 | PMU_AHBM); + clkdev_add_pmu("1d900000.pcie", "phy", 1, 1, PMU1_PCIE_PHY); + clkdev_add_pmu("1d900000.pcie", "bus", 1, 0, PMU_PCIE_CLK); + clkdev_add_pmu("1d900000.pcie", "msi", 1, 1, PMU1_PCIE_MSI); + clkdev_add_pmu("1d900000.pcie", "pdi", 1, 1, PMU1_PCIE_PDI); + clkdev_add_pmu("1d900000.pcie", "ctl", 1, 1, PMU1_PCIE_CTL); + clkdev_add_pmu(NULL, "ahb", 1, 0, PMU_AHBM | PMU_AHBS); + + clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); + clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM | PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | PMU_PPE_QSB | PMU_PPE_TOP); - clkdev_add_pmu("1f203000.rcu", "gphy", 0, PMU_GPHY); + clkdev_add_pmu("1f203000.rcu", "gphy", 0, 0, PMU_GPHY); + clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO); + clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); + clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); } else if (of_machine_is_compatible("lantiq,ar9")) { clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(), ltq_ar9_fpi_hz(), CLOCK_250M); - clkdev_add_pmu("1e180000.etop", "switch", 0, PMU_SWITCH); + clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0); + clkdev_add_pmu("1e101000.usb", "phy", 1, 0, PMU_USB0_P); + clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1); + clkdev_add_pmu("1e106000.usb", "phy", 1, 0, PMU_USB1_P); + clkdev_add_pmu("1e180000.etop", "switch", 1, 0, PMU_SWITCH); + clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO); + clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); + clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); + clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0); } else { clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(), ltq_danube_fpi_hz(), ltq_danube_pp32_hz()); + clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0); + clkdev_add_pmu("1e101000.usb", "phy", 1, 0, PMU_USB0_P); + clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO); + clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); + clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); + clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0); } + + if (of_machine_is_compatible("lantiq,vr9")) + xbar_fpi_burst_disable(); }