--- zzzz-none-000/linux-3.10.107/arch/mips/netlogic/xlp/wakeup.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/arch/mips/netlogic/xlp/wakeup.c 2021-02-04 17:41:59.000000000 +0000 @@ -32,7 +32,6 @@ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#include #include #include @@ -47,28 +46,42 @@ #include #include -#include #include +#include #include static int xlp_wakeup_core(uint64_t sysbase, int node, int core) { uint32_t coremask, value; - int count; + int count, resetreg; coremask = (1 << core); - /* Enable CPU clock */ - value = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL); - value &= ~coremask; - nlm_write_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL, value); + /* Enable CPU clock in case of 8xx/3xx */ + if (!cpu_is_xlpii()) { + value = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL); + value &= ~coremask; + nlm_write_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL, value); + } + + /* On 9XX, mark coherent first */ + if (cpu_is_xlp9xx()) { + value = nlm_read_sys_reg(sysbase, SYS_9XX_CPU_NONCOHERENT_MODE); + value &= ~coremask; + nlm_write_sys_reg(sysbase, SYS_9XX_CPU_NONCOHERENT_MODE, value); + } /* Remove CPU Reset */ - value = nlm_read_sys_reg(sysbase, SYS_CPU_RESET); + resetreg = cpu_is_xlp9xx() ? SYS_9XX_CPU_RESET : SYS_CPU_RESET; + value = nlm_read_sys_reg(sysbase, resetreg); value &= ~coremask; - nlm_write_sys_reg(sysbase, SYS_CPU_RESET, value); + nlm_write_sys_reg(sysbase, resetreg, value); + + /* We are done on 9XX */ + if (cpu_is_xlp9xx()) + return 1; - /* Poll for CPU to mark itself coherent */ + /* Poll for CPU to mark itself coherent on other type of XLP */ count = 100000; do { value = nlm_read_sys_reg(sysbase, SYS_CPU_NONCOHERENT_MODE); @@ -77,30 +90,86 @@ return count != 0; } +static int wait_for_cpus(int cpu, int bootcpu) +{ + volatile uint32_t *cpu_ready = nlm_get_boot_data(BOOT_CPU_READY); + int i, count, notready; + + count = 0x800000; + do { + notready = nlm_threads_per_core; + for (i = 0; i < nlm_threads_per_core; i++) + if (cpu_ready[cpu + i] || (cpu + i) == bootcpu) + --notready; + } while (notready != 0 && --count > 0); + + return count != 0; +} + static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask) { struct nlm_soc_info *nodep; - uint64_t syspcibase; - uint32_t syscoremask; - int core, n, cpu, count, val; + uint64_t syspcibase, fusebase; + uint32_t syscoremask, mask, fusemask; + int core, n, cpu, ncores; for (n = 0; n < NLM_NR_NODES; n++) { - syspcibase = nlm_get_sys_pcibase(n); - if (nlm_read_reg(syspcibase, 0) == 0xffffffff) - break; + if (n != 0) { + /* check if node exists and is online */ + if (cpu_is_xlp9xx()) { + int b = xlp9xx_get_socbus(n); + pr_info("Node %d SoC PCI bus %d.\n", n, b); + if (b == 0) + break; + } else { + syspcibase = nlm_get_sys_pcibase(n); + if (nlm_read_reg(syspcibase, 0) == 0xffffffff) + break; + } + nlm_node_init(n); + } /* read cores in reset from SYS */ - if (n != 0) - nlm_node_init(n); nodep = nlm_get_node(n); - syscoremask = nlm_read_sys_reg(nodep->sysbase, SYS_CPU_RESET); - /* The boot cpu */ - if (n == 0) { - syscoremask |= 1; - nodep->coremask = 1; + + if (cpu_is_xlp9xx()) { + fusebase = nlm_get_fuse_regbase(n); + fusemask = nlm_read_reg(fusebase, FUSE_9XX_DEVCFG6); + switch (read_c0_prid() & PRID_IMP_MASK) { + case PRID_IMP_NETLOGIC_XLP5XX: + mask = 0xff; + break; + case PRID_IMP_NETLOGIC_XLP9XX: + default: + mask = 0xfffff; + break; + } + } else { + fusemask = nlm_read_sys_reg(nodep->sysbase, + SYS_EFUSE_DEVICE_CFG_STATUS0); + switch (read_c0_prid() & PRID_IMP_MASK) { + case PRID_IMP_NETLOGIC_XLP3XX: + mask = 0xf; + break; + case PRID_IMP_NETLOGIC_XLP2XX: + mask = 0x3; + break; + case PRID_IMP_NETLOGIC_XLP8XX: + default: + mask = 0xff; + break; + } } - for (core = 0; core < NLM_CORES_PER_NODE; core++) { + /* + * Fused out cores are set in the fusemask, and the remaining + * cores are renumbered to range 0 .. nactive-1 + */ + syscoremask = (1 << hweight32(~fusemask & mask)) - 1; + + pr_info("Node %d - SYS/FUSE coremask %x\n", n, syscoremask); + ncores = nlm_cores_per_node(); + for (core = 0; core < ncores; core++) { /* we will be on node 0 core 0 */ if (n == 0 && core == 0) continue; @@ -110,8 +179,7 @@ continue; /* see if at least the first hw thread is enabled */ - cpu = (n * NLM_CORES_PER_NODE + core) - * NLM_THREADS_PER_CORE; + cpu = (n * ncores + core) * NLM_THREADS_PER_CORE; if (!cpumask_test_cpu(cpu, wakeup_mask)) continue; @@ -122,11 +190,9 @@ /* core is up */ nodep->coremask |= 1u << core; - /* spin until the first hw thread sets its ready */ - count = 0x20000000; - do { - val = *(volatile int *)&nlm_cpu_ready[cpu]; - } while (val == 0 && --count > 0); + /* spin until the hw threads sets their ready */ + if (!wait_for_cpus(cpu, 0)) + pr_err("Node %d : timeout core %d\n", n, core); } } } @@ -138,6 +204,8 @@ * first wakeup core 0 threads */ xlp_boot_core0_siblings(); + if (!wait_for_cpus(0, 0)) + pr_err("Node 0 : timeout core 0\n"); /* now get other cores out of reset */ xlp_enable_secondary_cores(&nlm_cpumask);