--- zzzz-none-000/linux-3.10.107/arch/mips/ralink/mt7620.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/arch/mips/ralink/mt7620.c 2021-02-04 17:41:59.000000000 +0000 @@ -17,157 +17,441 @@ #include #include #include +#include #include "common.h" +/* analog */ +#define PMU0_CFG 0x88 +#define PMU_SW_SET BIT(28) +#define A_DCDC_EN BIT(24) +#define A_SSC_PERI BIT(19) +#define A_SSC_GEN BIT(18) +#define A_SSC_M 0x3 +#define A_SSC_S 16 +#define A_DLY_M 0x7 +#define A_DLY_S 8 +#define A_VTUNE_M 0xff + +/* digital */ +#define PMU1_CFG 0x8C +#define DIG_SW_SEL BIT(25) + +/* clock scaling */ +#define CLKCFG_FDIV_MASK 0x1f00 +#define CLKCFG_FDIV_USB_VAL 0x0300 +#define CLKCFG_FFRAC_MASK 0x001f +#define CLKCFG_FFRAC_USB_VAL 0x0003 + +/* EFUSE bits */ +#define EFUSE_MT7688 0x100000 + +/* DRAM type bit */ +#define DRAM_TYPE_MT7628_MASK 0x1 + /* does the board have sdram or ddram */ static int dram_type; -/* the pll dividers */ -static u32 mt7620_clk_divider[] = { 2, 3, 4, 8 }; +static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 1, 2) }; +static struct rt2880_pmx_func spi_grp[] = { FUNC("spi", 0, 3, 4) }; +static struct rt2880_pmx_func uartlite_grp[] = { FUNC("uartlite", 0, 15, 2) }; +static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 22, 2) }; +static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 24, 12) }; +static struct rt2880_pmx_func refclk_grp[] = { FUNC("spi refclk", 0, 37, 3) }; +static struct rt2880_pmx_func ephy_grp[] = { FUNC("ephy", 0, 40, 5) }; +static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 60, 12) }; +static struct rt2880_pmx_func wled_grp[] = { FUNC("wled", 0, 72, 1) }; +static struct rt2880_pmx_func pa_grp[] = { FUNC("pa", 0, 18, 4) }; +static struct rt2880_pmx_func uartf_grp[] = { + FUNC("uartf", MT7620_GPIO_MODE_UARTF, 7, 8), + FUNC("pcm uartf", MT7620_GPIO_MODE_PCM_UARTF, 7, 8), + FUNC("pcm i2s", MT7620_GPIO_MODE_PCM_I2S, 7, 8), + FUNC("i2s uartf", MT7620_GPIO_MODE_I2S_UARTF, 7, 8), + FUNC("pcm gpio", MT7620_GPIO_MODE_PCM_GPIO, 11, 4), + FUNC("gpio uartf", MT7620_GPIO_MODE_GPIO_UARTF, 7, 4), + FUNC("gpio i2s", MT7620_GPIO_MODE_GPIO_I2S, 7, 4), +}; +static struct rt2880_pmx_func wdt_grp[] = { + FUNC("wdt rst", 0, 17, 1), + FUNC("wdt refclk", 0, 17, 1), + }; +static struct rt2880_pmx_func pcie_rst_grp[] = { + FUNC("pcie rst", MT7620_GPIO_MODE_PCIE_RST, 36, 1), + FUNC("pcie refclk", MT7620_GPIO_MODE_PCIE_REF, 36, 1) +}; +static struct rt2880_pmx_func nd_sd_grp[] = { + FUNC("nand", MT7620_GPIO_MODE_NAND, 45, 15), + FUNC("sd", MT7620_GPIO_MODE_SD, 45, 15) +}; + +static struct rt2880_pmx_group mt7620a_pinmux_data[] = { + GRP("i2c", i2c_grp, 1, MT7620_GPIO_MODE_I2C), + GRP("uartf", uartf_grp, MT7620_GPIO_MODE_UART0_MASK, + MT7620_GPIO_MODE_UART0_SHIFT), + GRP("spi", spi_grp, 1, MT7620_GPIO_MODE_SPI), + GRP("uartlite", uartlite_grp, 1, MT7620_GPIO_MODE_UART1), + GRP_G("wdt", wdt_grp, MT7620_GPIO_MODE_WDT_MASK, + MT7620_GPIO_MODE_WDT_GPIO, MT7620_GPIO_MODE_WDT_SHIFT), + GRP("mdio", mdio_grp, 1, MT7620_GPIO_MODE_MDIO), + GRP("rgmii1", rgmii1_grp, 1, MT7620_GPIO_MODE_RGMII1), + GRP("spi refclk", refclk_grp, 1, MT7620_GPIO_MODE_SPI_REF_CLK), + GRP_G("pcie", pcie_rst_grp, MT7620_GPIO_MODE_PCIE_MASK, + MT7620_GPIO_MODE_PCIE_GPIO, MT7620_GPIO_MODE_PCIE_SHIFT), + GRP_G("nd_sd", nd_sd_grp, MT7620_GPIO_MODE_ND_SD_MASK, + MT7620_GPIO_MODE_ND_SD_GPIO, MT7620_GPIO_MODE_ND_SD_SHIFT), + GRP("rgmii2", rgmii2_grp, 1, MT7620_GPIO_MODE_RGMII2), + GRP("wled", wled_grp, 1, MT7620_GPIO_MODE_WLED), + GRP("ephy", ephy_grp, 1, MT7620_GPIO_MODE_EPHY), + GRP("pa", pa_grp, 1, MT7620_GPIO_MODE_PA), + { 0 } +}; + +static struct rt2880_pmx_func pwm1_grp_mt7628[] = { + FUNC("sdcx", 3, 19, 1), + FUNC("utif", 2, 19, 1), + FUNC("gpio", 1, 19, 1), + FUNC("pwm", 0, 19, 1), +}; + +static struct rt2880_pmx_func pwm0_grp_mt7628[] = { + FUNC("sdcx", 3, 18, 1), + FUNC("utif", 2, 18, 1), + FUNC("gpio", 1, 18, 1), + FUNC("pwm", 0, 18, 1), +}; + +static struct rt2880_pmx_func uart2_grp_mt7628[] = { + FUNC("sdcx", 3, 20, 2), + FUNC("pwm", 2, 20, 2), + FUNC("gpio", 1, 20, 2), + FUNC("uart", 0, 20, 2), +}; + +static struct rt2880_pmx_func uart1_grp_mt7628[] = { + FUNC("sdcx", 3, 45, 2), + FUNC("pwm", 2, 45, 2), + FUNC("gpio", 1, 45, 2), + FUNC("uart", 0, 45, 2), +}; + +static struct rt2880_pmx_func i2c_grp_mt7628[] = { + FUNC("-", 3, 4, 2), + FUNC("debug", 2, 4, 2), + FUNC("gpio", 1, 4, 2), + FUNC("i2c", 0, 4, 2), +}; + +static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) }; +static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) }; +static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 15, 38) }; +static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) }; + +static struct rt2880_pmx_func sd_mode_grp_mt7628[] = { + FUNC("jtag", 3, 22, 8), + FUNC("utif", 2, 22, 8), + FUNC("gpio", 1, 22, 8), + FUNC("sdcx", 0, 22, 8), +}; -static struct ralink_pinmux_grp mode_mux[] = { - { - .name = "i2c", - .mask = MT7620_GPIO_MODE_I2C, - .gpio_first = 1, - .gpio_last = 2, - }, { - .name = "spi", - .mask = MT7620_GPIO_MODE_SPI, - .gpio_first = 3, - .gpio_last = 6, - }, { - .name = "uartlite", - .mask = MT7620_GPIO_MODE_UART1, - .gpio_first = 15, - .gpio_last = 16, - }, { - .name = "wdt", - .mask = MT7620_GPIO_MODE_WDT, - .gpio_first = 17, - .gpio_last = 17, - }, { - .name = "mdio", - .mask = MT7620_GPIO_MODE_MDIO, - .gpio_first = 22, - .gpio_last = 23, - }, { - .name = "rgmii1", - .mask = MT7620_GPIO_MODE_RGMII1, - .gpio_first = 24, - .gpio_last = 35, - }, { - .name = "spi refclk", - .mask = MT7620_GPIO_MODE_SPI_REF_CLK, - .gpio_first = 37, - .gpio_last = 39, - }, { - .name = "jtag", - .mask = MT7620_GPIO_MODE_JTAG, - .gpio_first = 40, - .gpio_last = 44, - }, { - /* shared lines with jtag */ - .name = "ephy", - .mask = MT7620_GPIO_MODE_EPHY, - .gpio_first = 40, - .gpio_last = 44, - }, { - .name = "nand", - .mask = MT7620_GPIO_MODE_JTAG, - .gpio_first = 45, - .gpio_last = 59, - }, { - .name = "rgmii2", - .mask = MT7620_GPIO_MODE_RGMII2, - .gpio_first = 60, - .gpio_last = 71, - }, { - .name = "wled", - .mask = MT7620_GPIO_MODE_WLED, - .gpio_first = 72, - .gpio_last = 72, - }, {0} -}; - -static struct ralink_pinmux_grp uart_mux[] = { - { - .name = "uartf", - .mask = MT7620_GPIO_MODE_UARTF, - .gpio_first = 7, - .gpio_last = 14, - }, { - .name = "pcm uartf", - .mask = MT7620_GPIO_MODE_PCM_UARTF, - .gpio_first = 7, - .gpio_last = 14, - }, { - .name = "pcm i2s", - .mask = MT7620_GPIO_MODE_PCM_I2S, - .gpio_first = 7, - .gpio_last = 14, - }, { - .name = "i2s uartf", - .mask = MT7620_GPIO_MODE_I2S_UARTF, - .gpio_first = 7, - .gpio_last = 14, - }, { - .name = "pcm gpio", - .mask = MT7620_GPIO_MODE_PCM_GPIO, - .gpio_first = 11, - .gpio_last = 14, - }, { - .name = "gpio uartf", - .mask = MT7620_GPIO_MODE_GPIO_UARTF, - .gpio_first = 7, - .gpio_last = 10, - }, { - .name = "gpio i2s", - .mask = MT7620_GPIO_MODE_GPIO_I2S, - .gpio_first = 7, - .gpio_last = 10, - }, { - .name = "gpio", - .mask = MT7620_GPIO_MODE_GPIO, - }, {0} -}; - -struct ralink_pinmux rt_gpio_pinmux = { - .mode = mode_mux, - .uart = uart_mux, - .uart_shift = MT7620_GPIO_MODE_UART0_SHIFT, - .uart_mask = MT7620_GPIO_MODE_UART0_MASK, +static struct rt2880_pmx_func uart0_grp_mt7628[] = { + FUNC("-", 3, 12, 2), + FUNC("-", 2, 12, 2), + FUNC("gpio", 1, 12, 2), + FUNC("uart", 0, 12, 2), }; +static struct rt2880_pmx_func i2s_grp_mt7628[] = { + FUNC("antenna", 3, 0, 4), + FUNC("pcm", 2, 0, 4), + FUNC("gpio", 1, 0, 4), + FUNC("i2s", 0, 0, 4), +}; + +static struct rt2880_pmx_func spi_cs1_grp_mt7628[] = { + FUNC("-", 3, 6, 1), + FUNC("refclk", 2, 6, 1), + FUNC("gpio", 1, 6, 1), + FUNC("spi", 0, 6, 1), +}; + +static struct rt2880_pmx_func spis_grp_mt7628[] = { + FUNC("pwm", 3, 14, 4), + FUNC("util", 2, 14, 4), + FUNC("gpio", 1, 14, 4), + FUNC("spis", 0, 14, 4), +}; + +static struct rt2880_pmx_func gpio_grp_mt7628[] = { + FUNC("pcie", 3, 11, 1), + FUNC("refclk", 2, 11, 1), + FUNC("gpio", 1, 11, 1), + FUNC("gpio", 0, 11, 1), +}; + +#define MT7628_GPIO_MODE_MASK 0x3 + +#define MT7628_GPIO_MODE_PWM1 30 +#define MT7628_GPIO_MODE_PWM0 28 +#define MT7628_GPIO_MODE_UART2 26 +#define MT7628_GPIO_MODE_UART1 24 +#define MT7628_GPIO_MODE_I2C 20 +#define MT7628_GPIO_MODE_REFCLK 18 +#define MT7628_GPIO_MODE_PERST 16 +#define MT7628_GPIO_MODE_WDT 14 +#define MT7628_GPIO_MODE_SPI 12 +#define MT7628_GPIO_MODE_SDMODE 10 +#define MT7628_GPIO_MODE_UART0 8 +#define MT7628_GPIO_MODE_I2S 6 +#define MT7628_GPIO_MODE_CS1 4 +#define MT7628_GPIO_MODE_SPIS 2 +#define MT7628_GPIO_MODE_GPIO 0 + +static struct rt2880_pmx_group mt7628an_pinmux_data[] = { + GRP_G("pmw1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK, + 1, MT7628_GPIO_MODE_PWM1), + GRP_G("pmw1", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK, + 1, MT7628_GPIO_MODE_PWM0), + GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK, + 1, MT7628_GPIO_MODE_UART2), + GRP_G("uart1", uart1_grp_mt7628, MT7628_GPIO_MODE_MASK, + 1, MT7628_GPIO_MODE_UART1), + GRP_G("i2c", i2c_grp_mt7628, MT7628_GPIO_MODE_MASK, + 1, MT7628_GPIO_MODE_I2C), + GRP("refclk", refclk_grp_mt7628, 1, MT7628_GPIO_MODE_REFCLK), + GRP("perst", perst_grp_mt7628, 1, MT7628_GPIO_MODE_PERST), + GRP("wdt", wdt_grp_mt7628, 1, MT7628_GPIO_MODE_WDT), + GRP("spi", spi_grp_mt7628, 1, MT7628_GPIO_MODE_SPI), + GRP_G("sdmode", sd_mode_grp_mt7628, MT7628_GPIO_MODE_MASK, + 1, MT7628_GPIO_MODE_SDMODE), + GRP_G("uart0", uart0_grp_mt7628, MT7628_GPIO_MODE_MASK, + 1, MT7628_GPIO_MODE_UART0), + GRP_G("i2s", i2s_grp_mt7628, MT7628_GPIO_MODE_MASK, + 1, MT7628_GPIO_MODE_I2S), + GRP_G("spi cs1", spi_cs1_grp_mt7628, MT7628_GPIO_MODE_MASK, + 1, MT7628_GPIO_MODE_CS1), + GRP_G("spis", spis_grp_mt7628, MT7628_GPIO_MODE_MASK, + 1, MT7628_GPIO_MODE_SPIS), + GRP_G("gpio", gpio_grp_mt7628, MT7628_GPIO_MODE_MASK, + 1, MT7628_GPIO_MODE_GPIO), + { 0 } +}; + +static inline int is_mt76x8(void) +{ + return ralink_soc == MT762X_SOC_MT7628AN || + ralink_soc == MT762X_SOC_MT7688; +} + +static __init u32 +mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div) +{ + u64 t; + + t = ref_rate; + t *= mul; + do_div(t, div); + + return t; +} + +#define MHZ(x) ((x) * 1000 * 1000) + +static __init unsigned long +mt7620_get_xtal_rate(void) +{ + u32 reg; + + reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0); + if (reg & SYSCFG0_XTAL_FREQ_SEL) + return MHZ(40); + + return MHZ(20); +} + +static __init unsigned long +mt7620_get_periph_rate(unsigned long xtal_rate) +{ + u32 reg; + + reg = rt_sysc_r32(SYSC_REG_CLKCFG0); + if (reg & CLKCFG0_PERI_CLK_SEL) + return xtal_rate; + + return MHZ(40); +} + +static const u32 mt7620_clk_divider[] __initconst = { 2, 3, 4, 8 }; + +static __init unsigned long +mt7620_get_cpu_pll_rate(unsigned long xtal_rate) +{ + u32 reg; + u32 mul; + u32 div; + + reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0); + if (reg & CPLL_CFG0_BYPASS_REF_CLK) + return xtal_rate; + + if ((reg & CPLL_CFG0_SW_CFG) == 0) + return MHZ(600); + + mul = (reg >> CPLL_CFG0_PLL_MULT_RATIO_SHIFT) & + CPLL_CFG0_PLL_MULT_RATIO_MASK; + mul += 24; + if (reg & CPLL_CFG0_LC_CURFCK) + mul *= 2; + + div = (reg >> CPLL_CFG0_PLL_DIV_RATIO_SHIFT) & + CPLL_CFG0_PLL_DIV_RATIO_MASK; + + WARN_ON(div >= ARRAY_SIZE(mt7620_clk_divider)); + + return mt7620_calc_rate(xtal_rate, mul, mt7620_clk_divider[div]); +} + +static __init unsigned long +mt7620_get_pll_rate(unsigned long xtal_rate, unsigned long cpu_pll_rate) +{ + u32 reg; + + reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1); + if (reg & CPLL_CFG1_CPU_AUX1) + return xtal_rate; + + if (reg & CPLL_CFG1_CPU_AUX0) + return MHZ(480); + + return cpu_pll_rate; +} + +static __init unsigned long +mt7620_get_cpu_rate(unsigned long pll_rate) +{ + u32 reg; + u32 mul; + u32 div; + + reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); + + mul = reg & CPU_SYS_CLKCFG_CPU_FFRAC_MASK; + div = (reg >> CPU_SYS_CLKCFG_CPU_FDIV_SHIFT) & + CPU_SYS_CLKCFG_CPU_FDIV_MASK; + + return mt7620_calc_rate(pll_rate, mul, div); +} + +static const u32 mt7620_ocp_dividers[16] __initconst = { + [CPU_SYS_CLKCFG_OCP_RATIO_2] = 2, + [CPU_SYS_CLKCFG_OCP_RATIO_3] = 3, + [CPU_SYS_CLKCFG_OCP_RATIO_4] = 4, + [CPU_SYS_CLKCFG_OCP_RATIO_5] = 5, + [CPU_SYS_CLKCFG_OCP_RATIO_10] = 10, +}; + +static __init unsigned long +mt7620_get_dram_rate(unsigned long pll_rate) +{ + if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM) + return pll_rate / 4; + + return pll_rate / 3; +} + +static __init unsigned long +mt7620_get_sys_rate(unsigned long cpu_rate) +{ + u32 reg; + u32 ocp_ratio; + u32 div; + + reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); + + ocp_ratio = (reg >> CPU_SYS_CLKCFG_OCP_RATIO_SHIFT) & + CPU_SYS_CLKCFG_OCP_RATIO_MASK; + + if (WARN_ON(ocp_ratio >= ARRAY_SIZE(mt7620_ocp_dividers))) + return cpu_rate; + + div = mt7620_ocp_dividers[ocp_ratio]; + if (WARN(!div, "invalid divider for OCP ratio %u", ocp_ratio)) + return cpu_rate; + + return cpu_rate / div; +} + void __init ralink_clk_init(void) { - unsigned long cpu_rate, sys_rate; - u32 c0 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0); - u32 c1 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1); - u32 swconfig = (c0 >> CPLL_SW_CONFIG_SHIFT) & CPLL_SW_CONFIG_MASK; - u32 cpu_clk = (c1 >> CPLL_CPU_CLK_SHIFT) & CPLL_CPU_CLK_MASK; - - if (cpu_clk) { - cpu_rate = 480000000; - } else if (!swconfig) { - cpu_rate = 600000000; + unsigned long xtal_rate; + unsigned long cpu_pll_rate; + unsigned long pll_rate; + unsigned long cpu_rate; + unsigned long sys_rate; + unsigned long dram_rate; + unsigned long periph_rate; + + xtal_rate = mt7620_get_xtal_rate(); + +#define RFMT(label) label ":%lu.%03luMHz " +#define RINT(x) ((x) / 1000000) +#define RFRAC(x) (((x) / 1000) % 1000) + + if (is_mt76x8()) { + if (xtal_rate == MHZ(40)) + cpu_rate = MHZ(580); + else + cpu_rate = MHZ(575); + dram_rate = sys_rate = cpu_rate / 3; + periph_rate = MHZ(40); + + ralink_clk_add("10000d00.uartlite", periph_rate); + ralink_clk_add("10000e00.uartlite", periph_rate); } else { - u32 m = (c0 >> CPLL_MULT_RATIO_SHIFT) & CPLL_MULT_RATIO; - u32 d = (c0 >> CPLL_DIV_RATIO_SHIFT) & CPLL_DIV_RATIO; + cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate); + pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate); + + cpu_rate = mt7620_get_cpu_rate(pll_rate); + dram_rate = mt7620_get_dram_rate(pll_rate); + sys_rate = mt7620_get_sys_rate(cpu_rate); + periph_rate = mt7620_get_periph_rate(xtal_rate); + + pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"), + RINT(xtal_rate), RFRAC(xtal_rate), + RINT(cpu_pll_rate), RFRAC(cpu_pll_rate), + RINT(pll_rate), RFRAC(pll_rate)); - cpu_rate = ((40 * (m + 24)) / mt7620_clk_divider[d]) * 1000000; + ralink_clk_add("10000500.uart", periph_rate); } - if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM) - sys_rate = cpu_rate / 4; - else - sys_rate = cpu_rate / 3; + pr_debug(RFMT("CPU") RFMT("DRAM") RFMT("SYS") RFMT("PERIPH"), + RINT(cpu_rate), RFRAC(cpu_rate), + RINT(dram_rate), RFRAC(dram_rate), + RINT(sys_rate), RFRAC(sys_rate), + RINT(periph_rate), RFRAC(periph_rate)); +#undef RFRAC +#undef RINT +#undef RFMT ralink_clk_add("cpu", cpu_rate); - ralink_clk_add("10000100.timer", 40000000); - ralink_clk_add("10000500.uart", 40000000); - ralink_clk_add("10000c00.uartlite", 40000000); + ralink_clk_add("10000100.timer", periph_rate); + ralink_clk_add("10000120.watchdog", periph_rate); + ralink_clk_add("10000b00.spi", sys_rate); + ralink_clk_add("10000c00.uartlite", periph_rate); + ralink_clk_add("10180000.wmac", xtal_rate); + + if (IS_ENABLED(CONFIG_USB) && is_mt76x8()) { + /* + * When the CPU goes into sleep mode, the BUS clock will be + * too low for USB to function properly. Adjust the busses + * fractional divider to fix this + */ + u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); + + val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK); + val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL; + + rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG); + } } void __init ralink_of_remap(void) @@ -179,6 +463,52 @@ panic("Failed to remap core resources"); } +static __init void +mt7620_dram_init(struct ralink_soc_info *soc_info) +{ + switch (dram_type) { + case SYSCFG0_DRAM_TYPE_SDRAM: + pr_info("Board has SDRAM\n"); + soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN; + soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX; + break; + + case SYSCFG0_DRAM_TYPE_DDR1: + pr_info("Board has DDR1\n"); + soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN; + soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX; + break; + + case SYSCFG0_DRAM_TYPE_DDR2: + pr_info("Board has DDR2\n"); + soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN; + soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX; + break; + default: + BUG(); + } +} + +static __init void +mt7628_dram_init(struct ralink_soc_info *soc_info) +{ + switch (dram_type) { + case SYSCFG0_DRAM_TYPE_DDR1_MT7628: + pr_info("Board has DDR1\n"); + soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN; + soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX; + break; + + case SYSCFG0_DRAM_TYPE_DDR2_MT7628: + pr_info("Board has DDR2\n"); + soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN; + soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX; + break; + default: + BUG(); + } +} + void prom_soc_init(struct ralink_soc_info *soc_info) { void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE); @@ -187,22 +517,40 @@ u32 n1; u32 rev; u32 cfg0; + u32 pmu0; + u32 pmu1; + u32 bga; n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); + rev = __raw_readl(sysc + SYSC_REG_CHIP_REV); + bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK; - if (n0 == MT7620N_CHIP_NAME0 && n1 == MT7620N_CHIP_NAME1) { - name = "MT7620N"; - soc_info->compatible = "ralink,mt7620n-soc"; - } else if (n0 == MT7620A_CHIP_NAME0 && n1 == MT7620A_CHIP_NAME1) { - name = "MT7620A"; - soc_info->compatible = "ralink,mt7620a-soc"; + if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) { + if (bga) { + ralink_soc = MT762X_SOC_MT7620A; + name = "MT7620A"; + soc_info->compatible = "ralink,mt7620a-soc"; + } else { + ralink_soc = MT762X_SOC_MT7620N; + name = "MT7620N"; + soc_info->compatible = "ralink,mt7620n-soc"; + } + } else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) { + u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG); + + if (efuse & EFUSE_MT7688) { + ralink_soc = MT762X_SOC_MT7688; + name = "MT7688"; + } else { + ralink_soc = MT762X_SOC_MT7628AN; + name = "MT7628AN"; + } + soc_info->compatible = "ralink,mt7628an-soc"; } else { - panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1); + panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1); } - rev = __raw_readl(sysc + SYSC_REG_CHIP_REV); - snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN, "Ralink %s ver:%u eco:%u", name, @@ -210,25 +558,28 @@ (rev & CHIP_REV_ECO_MASK)); cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0); - dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK; + if (is_mt76x8()) + dram_type = cfg0 & DRAM_TYPE_MT7628_MASK; + else + dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & + SYSCFG0_DRAM_TYPE_MASK; - switch (dram_type) { - case SYSCFG0_DRAM_TYPE_SDRAM: - soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN; - soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX; - break; + soc_info->mem_base = MT7620_DRAM_BASE; + if (is_mt76x8()) + mt7628_dram_init(soc_info); + else + mt7620_dram_init(soc_info); - case SYSCFG0_DRAM_TYPE_DDR1: - soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN; - soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX; - break; + pmu0 = __raw_readl(sysc + PMU0_CFG); + pmu1 = __raw_readl(sysc + PMU1_CFG); - case SYSCFG0_DRAM_TYPE_DDR2: - soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN; - soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX; - break; - default: - BUG(); - } - soc_info->mem_base = MT7620_DRAM_BASE; + pr_info("Analog PMU set to %s control\n", + (pmu0 & PMU_SW_SET) ? ("sw") : ("hw")); + pr_info("Digital PMU set to %s control\n", + (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw")); + + if (is_mt76x8()) + rt2880_pinmux_data = mt7628an_pinmux_data; + else + rt2880_pinmux_data = mt7620a_pinmux_data; }