--- zzzz-none-000/linux-3.10.107/arch/powerpc/kernel/prom.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/arch/powerpc/kernel/prom.c 2021-02-04 17:41:59.000000000 +0000 @@ -29,10 +29,11 @@ #include <linux/bitops.h> #include <linux/export.h> #include <linux/kexec.h> -#include <linux/debugfs.h> #include <linux/irq.h> #include <linux/memblock.h> #include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/libfdt.h> #include <asm/prom.h> #include <asm/rtas.h> @@ -45,7 +46,6 @@ #include <asm/mmu.h> #include <asm/paca.h> #include <asm/pgtable.h> -#include <asm/pci.h> #include <asm/iommu.h> #include <asm/btext.h> #include <asm/sections.h> @@ -117,14 +117,14 @@ DBG("-> move_device_tree\n"); start = __pa(initial_boot_params); - size = be32_to_cpu(initial_boot_params->totalsize); + size = fdt_totalsize(initial_boot_params); if ((memory_limit && (start + size) > PHYSICAL_START + memory_limit) || overlaps_crashkernel(start, size) || overlaps_initrd(start, size)) { p = __va(memblock_alloc(size, PAGE_SIZE)); memcpy(p, initial_boot_params, size); - initial_boot_params = (struct boot_param_header *)p; + initial_boot_params = p; DBG("Moved device tree to 0x%p\n", p); } @@ -148,21 +148,28 @@ unsigned long cpu_features; /* CPU_FTR_xxx bit */ unsigned long mmu_features; /* MMU_FTR_xxx bit */ unsigned int cpu_user_ftrs; /* PPC_FEATURE_xxx bit */ + unsigned int cpu_user_ftrs2; /* PPC_FEATURE2_xxx bit */ unsigned char pabyte; /* byte number in ibm,pa-features */ unsigned char pabit; /* bit number (big-endian) */ unsigned char invert; /* if 1, pa bit set => clear feature */ } ibm_pa_features[] __initdata = { - {0, 0, PPC_FEATURE_HAS_MMU, 0, 0, 0}, - {0, 0, PPC_FEATURE_HAS_FPU, 0, 1, 0}, - {0, MMU_FTR_SLB, 0, 0, 2, 0}, - {CPU_FTR_CTRL, 0, 0, 0, 3, 0}, - {CPU_FTR_NOEXECUTE, 0, 0, 0, 6, 0}, - {CPU_FTR_NODSISRALIGN, 0, 0, 1, 1, 1}, - {0, MMU_FTR_CI_LARGE_PAGE, 0, 1, 2, 0}, - {CPU_FTR_REAL_LE, 0, PPC_FEATURE_TRUE_LE, 5, 0, 0}, + {0, 0, PPC_FEATURE_HAS_MMU, 0, 0, 0, 0}, + {0, 0, PPC_FEATURE_HAS_FPU, 0, 0, 1, 0}, + {CPU_FTR_CTRL, 0, 0, 0, 0, 3, 0}, + {CPU_FTR_NOEXECUTE, 0, 0, 0, 0, 6, 0}, + {CPU_FTR_NODSISRALIGN, 0, 0, 0, 1, 1, 1}, + {0, MMU_FTR_CI_LARGE_PAGE, 0, 0, 1, 2, 0}, + {CPU_FTR_REAL_LE, 0, PPC_FEATURE_TRUE_LE, 0, 5, 0, 0}, + /* + * If the kernel doesn't support TM (ie CONFIG_PPC_TRANSACTIONAL_MEM=n), + * we don't want to turn on TM here, so we use the *_COMP versions + * which are 0 if the kernel doesn't support TM. + */ + {CPU_FTR_TM_COMP, 0, 0, + PPC_FEATURE2_HTM_COMP|PPC_FEATURE2_HTM_NOSC_COMP, 22, 0, 0}, }; -static void __init scan_features(unsigned long node, unsigned char *ftrs, +static void __init scan_features(unsigned long node, const unsigned char *ftrs, unsigned long tablelen, struct ibm_pa_feature *fp, unsigned long ft_size) @@ -190,10 +197,12 @@ if (bit ^ fp->invert) { cur_cpu_spec->cpu_features |= fp->cpu_features; cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs; + cur_cpu_spec->cpu_user_features2 |= fp->cpu_user_ftrs2; cur_cpu_spec->mmu_features |= fp->mmu_features; } else { cur_cpu_spec->cpu_features &= ~fp->cpu_features; cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs; + cur_cpu_spec->cpu_user_features2 &= ~fp->cpu_user_ftrs2; cur_cpu_spec->mmu_features &= ~fp->mmu_features; } } @@ -201,8 +210,8 @@ static void __init check_cpu_pa_features(unsigned long node) { - unsigned char *pa_ftrs; - unsigned long tablelen; + const unsigned char *pa_ftrs; + int tablelen; pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen); if (pa_ftrs == NULL) @@ -213,22 +222,18 @@ } #ifdef CONFIG_PPC_STD_MMU_64 -static void __init check_cpu_slb_size(unsigned long node) +static void __init init_mmu_slb_size(unsigned long node) { - u32 *slb_size_ptr; + const __be32 *slb_size_ptr; - slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL); - if (slb_size_ptr != NULL) { - mmu_slb_size = *slb_size_ptr; - return; - } - slb_size_ptr = of_get_flat_dt_prop(node, "ibm,slb-size", NULL); - if (slb_size_ptr != NULL) { - mmu_slb_size = *slb_size_ptr; - } + slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL) ? : + of_get_flat_dt_prop(node, "ibm,slb-size", NULL); + + if (slb_size_ptr) + mmu_slb_size = be32_to_cpup(slb_size_ptr); } #else -#define check_cpu_slb_size(node) do { } while(0) +#define init_mmu_slb_size(node) do { } while(0) #endif static struct feature_property { @@ -256,7 +261,7 @@ static inline void identical_pvr_fixup(unsigned long node) { unsigned int pvr; - char *model = of_get_flat_dt_prop(node, "model", NULL); + const char *model = of_get_flat_dt_prop(node, "model", NULL); /* * Since 440GR(x)/440EP(x) processors have the same pvr, @@ -279,11 +284,11 @@ { unsigned long i; struct feature_property *fp = feature_properties; - const u32 *prop; + const __be32 *prop; for (i = 0; i < ARRAY_SIZE(feature_properties); ++i, ++fp) { prop = of_get_flat_dt_prop(node, fp->name, NULL); - if (prop && *prop >= fp->min_value) { + if (prop && be32_to_cpup(prop) >= fp->min_value) { cur_cpu_spec->cpu_features |= fp->cpu_feature; cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftr; } @@ -294,11 +299,11 @@ const char *uname, int depth, void *data) { - char *type = of_get_flat_dt_prop(node, "device_type", NULL); - const u32 *prop; - const u32 *intserv; + const char *type = of_get_flat_dt_prop(node, "device_type", NULL); + const __be32 *prop; + const __be32 *intserv; int i, nthreads; - unsigned long len; + int len; int found = -1; int found_thread = 0; @@ -308,12 +313,10 @@ /* Get physical cpuid */ intserv = of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &len); - if (intserv) { - nthreads = len / sizeof(int); - } else { - intserv = of_get_flat_dt_prop(node, "reg", NULL); - nthreads = 1; - } + if (!intserv) + intserv = of_get_flat_dt_prop(node, "reg", &len); + + nthreads = len / sizeof(int); /* * Now see if any of these threads match our boot cpu. @@ -324,8 +327,9 @@ * version 2 of the kexec param format adds the phys cpuid of * booted proc. */ - if (initial_boot_params->version >= 2) { - if (intserv[i] == initial_boot_params->boot_cpuid_phys) { + if (fdt_version(initial_boot_params) >= 2) { + if (be32_to_cpu(intserv[i]) == + fdt_boot_cpuid_phys(initial_boot_params)) { found = boot_cpu_count; found_thread = i; } @@ -345,51 +349,53 @@ #endif } - if (found >= 0) { - DBG("boot cpu: logical %d physical %d\n", found, - intserv[found_thread]); - boot_cpuid = found; - set_hard_smp_processor_id(found, intserv[found_thread]); + /* Not the boot CPU */ + if (found < 0) + return 0; - /* - * PAPR defines "logical" PVR values for cpus that - * meet various levels of the architecture: - * 0x0f000001 Architecture version 2.04 - * 0x0f000002 Architecture version 2.05 - * If the cpu-version property in the cpu node contains - * such a value, we call identify_cpu again with the - * logical PVR value in order to use the cpu feature - * bits appropriate for the architecture level. - * - * A POWER6 partition in "POWER6 architected" mode - * uses the 0x0f000002 PVR value; in POWER5+ mode - * it uses 0x0f000001. - */ - prop = of_get_flat_dt_prop(node, "cpu-version", NULL); - if (prop && (*prop & 0xff000000) == 0x0f000000) - identify_cpu(0, *prop); + DBG("boot cpu: logical %d physical %d\n", found, + be32_to_cpu(intserv[found_thread])); + boot_cpuid = found; + set_hard_smp_processor_id(found, be32_to_cpu(intserv[found_thread])); - identical_pvr_fixup(node); - } + /* + * PAPR defines "logical" PVR values for cpus that + * meet various levels of the architecture: + * 0x0f000001 Architecture version 2.04 + * 0x0f000002 Architecture version 2.05 + * If the cpu-version property in the cpu node contains + * such a value, we call identify_cpu again with the + * logical PVR value in order to use the cpu feature + * bits appropriate for the architecture level. + * + * A POWER6 partition in "POWER6 architected" mode + * uses the 0x0f000002 PVR value; in POWER5+ mode + * it uses 0x0f000001. + */ + prop = of_get_flat_dt_prop(node, "cpu-version", NULL); + if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000) + identify_cpu(0, be32_to_cpup(prop)); + + identical_pvr_fixup(node); check_cpu_feature_properties(node); check_cpu_pa_features(node); - check_cpu_slb_size(node); + init_mmu_slb_size(node); -#ifdef CONFIG_PPC_PSERIES +#ifdef CONFIG_PPC64 if (nthreads > 1) cur_cpu_spec->cpu_features |= CPU_FTR_SMT; else cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT; #endif - return 0; } -int __init early_init_dt_scan_chosen_ppc(unsigned long node, const char *uname, - int depth, void *data) +static int __init early_init_dt_scan_chosen_ppc(unsigned long node, + const char *uname, + int depth, void *data) { - unsigned long *lprop; + const unsigned long *lprop; /* All these set by kernel, so no need to convert endian */ /* Use common scan routine to determine if this is the chosen node */ if (early_init_dt_scan_chosen(node, uname, depth, data) == 0) @@ -440,8 +446,9 @@ */ static int __init early_init_dt_scan_drconf_memory(unsigned long node) { - __be32 *dm, *ls, *usm; - unsigned long l, n, flags; + const __be32 *dm, *ls, *usm; + int l; + unsigned long n, flags; u64 base, size, memblock_size; unsigned int is_kexec_kdump = 0, rngs; @@ -454,7 +461,7 @@ if (dm == NULL || l < sizeof(__be32)) return 0; - n = *dm++; /* number of entries */ + n = of_read_number(dm++, 1); /* number of entries */ if (l < (n * (dt_root_addr_cells + 4) + 1) * sizeof(__be32)) return 0; @@ -466,12 +473,13 @@ for (; n != 0; --n) { base = dt_mem_next_cell(dt_root_addr_cells, &dm); - flags = dm[3]; + flags = of_read_number(&dm[3], 1); /* skip DRC index, pad, assoc. list index, flags */ dm += 4; - /* skip this block if the reserved bit is set in flags (0x80) - or if the block is not assigned to this partition (0x8) */ - if ((flags & 0x80) || !(flags & 0x8)) + /* skip this block if the reserved bit is set in flags + or if the block is not assigned to this partition */ + if ((flags & DRCONF_MEM_RESERVED) || + !(flags & DRCONF_MEM_ASSIGNED)) continue; size = memblock_size; rngs = 1; @@ -521,6 +529,20 @@ return early_init_dt_scan_memory(node, uname, depth, data); } +/* + * For a relocatable kernel, we need to get the memstart_addr first, + * then use it to calculate the virtual kernel start address. This has + * to happen at a very early stage (before machine_init). In this case, + * we just want to get the memstart_address and would not like to mess the + * memblock at this stage. So introduce a variable to skip the memblock_add() + * for this reason. + */ +#ifdef CONFIG_RELOCATABLE +static int add_mem_to_memblock = 1; +#else +#define add_mem_to_memblock 1 +#endif + void __init early_init_dt_add_memory_arch(u64 base, u64 size) { #ifdef CONFIG_PPC64 @@ -541,45 +563,60 @@ } /* Add the chunk to the MEMBLOCK list */ - memblock_add(base, size); + if (add_mem_to_memblock) + memblock_add(base, size); } -void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) +static void __init early_reserve_mem_dt(void) { - return __va(memblock_alloc(size, align)); -} + unsigned long i, dt_root; + int len; + const __be32 *prop; -#ifdef CONFIG_BLK_DEV_INITRD -void __init early_init_dt_setup_initrd_arch(unsigned long start, - unsigned long end) -{ - initrd_start = (unsigned long)__va(start); - initrd_end = (unsigned long)__va(end); - initrd_below_start_ok = 1; + early_init_fdt_reserve_self(); + early_init_fdt_scan_reserved_mem(); + + dt_root = of_get_flat_dt_root(); + + prop = of_get_flat_dt_prop(dt_root, "reserved-ranges", &len); + + if (!prop) + return; + + DBG("Found new-style reserved-ranges\n"); + + /* Each reserved range is an (address,size) pair, 2 cells each, + * totalling 4 cells per range. */ + for (i = 0; i < len / (sizeof(*prop) * 4); i++) { + u64 base, size; + + base = of_read_number(prop + (i * 4) + 0, 2); + size = of_read_number(prop + (i * 4) + 2, 2); + + if (size) { + DBG("reserving: %llx -> %llx\n", base, size); + memblock_reserve(base, size); + } + } } -#endif static void __init early_reserve_mem(void) { - u64 base, size; - u64 *reserve_map; - unsigned long self_base; - unsigned long self_size; - - reserve_map = (u64 *)(((unsigned long)initial_boot_params) + - initial_boot_params->off_mem_rsvmap); - - /* before we do anything, lets reserve the dt blob */ - self_base = __pa((unsigned long)initial_boot_params); - self_size = initial_boot_params->totalsize; - memblock_reserve(self_base, self_size); + __be64 *reserve_map; + + reserve_map = (__be64 *)(((unsigned long)initial_boot_params) + + fdt_off_mem_rsvmap(initial_boot_params)); + + /* Look for the new "reserved-regions" property in the DT */ + early_reserve_mem_dt(); #ifdef CONFIG_BLK_DEV_INITRD - /* then reserve the initrd, if any */ - if (initrd_start && (initrd_end > initrd_start)) + /* Then reserve the initrd, if any */ + if (initrd_start && (initrd_end > initrd_start)) { memblock_reserve(_ALIGN_DOWN(__pa(initrd_start), PAGE_SIZE), _ALIGN_UP(initrd_end, PAGE_SIZE) - _ALIGN_DOWN(initrd_start, PAGE_SIZE)); + } #endif /* CONFIG_BLK_DEV_INITRD */ #ifdef CONFIG_PPC32 @@ -587,32 +624,23 @@ * Handle the case where we might be booting from an old kexec * image that setup the mem_rsvmap as pairs of 32-bit values */ - if (*reserve_map > 0xffffffffull) { + if (be64_to_cpup(reserve_map) > 0xffffffffull) { u32 base_32, size_32; - u32 *reserve_map_32 = (u32 *)reserve_map; + __be32 *reserve_map_32 = (__be32 *)reserve_map; + + DBG("Found old 32-bit reserve map\n"); while (1) { - base_32 = *(reserve_map_32++); - size_32 = *(reserve_map_32++); + base_32 = be32_to_cpup(reserve_map_32++); + size_32 = be32_to_cpup(reserve_map_32++); if (size_32 == 0) break; - /* skip if the reservation is for the blob */ - if (base_32 == self_base && size_32 == self_size) - continue; DBG("reserving: %x -> %x\n", base_32, size_32); memblock_reserve(base_32, size_32); } return; } #endif - while (1) { - base = *(reserve_map++); - size = *(reserve_map++); - if (size == 0) - break; - DBG("reserving: %llx -> %llx\n", base, size); - memblock_reserve(base, size); - } } void __init early_init_devtree(void *params) @@ -621,8 +649,9 @@ DBG(" -> early_init_devtree(%p)\n", params); - /* Setup flat device-tree pointer */ - initial_boot_params = params; + /* Too early to BUG_ON(), do it by hand */ + if (!early_init_dt_verify(params)) + panic("BUG: Failed verifying flat device tree, bad version?"); #ifdef CONFIG_PPC_RTAS /* Some machines might need RTAS info for debugging, grab it now. */ @@ -639,25 +668,16 @@ of_scan_flat_dt(early_init_dt_scan_fw_dump, NULL); #endif - /* Pre-initialize the cmd_line with the content of boot_commmand_line, - * which will be empty except when the content of the variable has - * been overriden by a bootloading mechanism. This happens typically - * with HAL takeover - */ - strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE); - /* Retrieve various informations from the /chosen node of the * device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... */ - of_scan_flat_dt(early_init_dt_scan_chosen_ppc, cmd_line); + of_scan_flat_dt(early_init_dt_scan_chosen_ppc, boot_command_line); /* Scan memory nodes and rebuild MEMBLOCKs */ of_scan_flat_dt(early_init_dt_scan_root, NULL); of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL); - /* Save command line for /proc/cmdline and then parse parameters */ - strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE); parse_early_param(); /* make sure we've parsed cmdline for mem= before this */ @@ -680,10 +700,7 @@ reserve_crashkernel(); early_reserve_mem(); - /* - * Ensure that total memory size is page-aligned, because otherwise - * mark_bootmem() gets upset. - */ + /* Ensure that total memory size is page-aligned. */ limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE); memblock_enforce_memory_limit(limit); @@ -704,6 +721,10 @@ * (altivec support, boot CPU ID, ...) */ of_scan_flat_dt(early_init_dt_scan_cpus, NULL); + if (boot_cpuid < 0) { + printk("Failed to identify boot CPU !\n"); + BUG(); + } #if defined(CONFIG_SMP) && defined(CONFIG_PPC64) /* We'll later wait for secondaries to check in; there are @@ -712,9 +733,38 @@ spinning_secondaries = boot_cpu_count - 1; #endif +#ifdef CONFIG_PPC_POWERNV + /* Scan and build the list of machine check recoverable ranges */ + of_scan_flat_dt(early_init_dt_scan_recoverable_ranges, NULL); +#endif + DBG(" <- early_init_devtree()\n"); } +#ifdef CONFIG_RELOCATABLE +/* + * This function run before early_init_devtree, so we have to init + * initial_boot_params. + */ +void __init early_get_first_memblock_info(void *params, phys_addr_t *size) +{ + /* Setup flat device-tree pointer */ + initial_boot_params = params; + + /* + * Scan the memory nodes and set add_mem_to_memblock to 0 to avoid + * mess the memblock. + */ + add_mem_to_memblock = 0; + of_scan_flat_dt(early_init_dt_scan_root, NULL); + of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL); + add_mem_to_memblock = 1; + + if (size) + *size = first_memblock_size; +} +#endif + /******* * * New implementation of the OF "find" APIs, return a refcounted @@ -727,166 +777,55 @@ *******/ /** - * of_find_next_cache_node - Find a node's subsidiary cache - * @np: node of type "cpu" or "cache" + * of_get_ibm_chip_id - Returns the IBM "chip-id" of a device + * @np: device node of the device * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. Caller should hold a reference - * to np. + * This looks for a property "ibm,chip-id" in the node or any + * of its parents and returns its content, or -1 if it cannot + * be found. */ -struct device_node *of_find_next_cache_node(struct device_node *np) +int of_get_ibm_chip_id(struct device_node *np) { - struct device_node *child; - const phandle *handle; - - handle = of_get_property(np, "l2-cache", NULL); - if (!handle) - handle = of_get_property(np, "next-level-cache", NULL); - - if (handle) - return of_find_node_by_phandle(*handle); - - /* OF on pmac has nodes instead of properties named "l2-cache" - * beneath CPU nodes. - */ - if (!strcmp(np->type, "cpu")) - for_each_child_of_node(np, child) - if (!strcmp(child->type, "cache")) - return child; - - return NULL; -} + of_node_get(np); + while (np) { + u32 chip_id; -#ifdef CONFIG_PPC_PSERIES -/* - * Fix up the uninitialized fields in a new device node: - * name, type and pci-specific fields - */ - -static int of_finish_dynamic_node(struct device_node *node) -{ - struct device_node *parent = of_get_parent(node); - int err = 0; - const phandle *ibm_phandle; - - node->name = of_get_property(node, "name", NULL); - node->type = of_get_property(node, "device_type", NULL); - - if (!node->name) - node->name = "<NULL>"; - if (!node->type) - node->type = "<NULL>"; - - if (!parent) { - err = -ENODEV; - goto out; - } - - /* We don't support that function on PowerMac, at least - * not yet - */ - if (machine_is(powermac)) - return -ENODEV; - - /* fix up new node's phandle field */ - if ((ibm_phandle = of_get_property(node, "ibm,phandle", NULL))) - node->phandle = *ibm_phandle; - -out: - of_node_put(parent); - return err; -} - -static int prom_reconfig_notifier(struct notifier_block *nb, - unsigned long action, void *node) -{ - int err; + /* + * Skiboot may produce memory nodes that contain more than one + * cell in chip-id, we only read the first one here. + */ + if (!of_property_read_u32(np, "ibm,chip-id", &chip_id)) { + of_node_put(np); + return chip_id; + } - switch (action) { - case OF_RECONFIG_ATTACH_NODE: - err = of_finish_dynamic_node(node); - if (err < 0) - printk(KERN_ERR "finish_node returned %d\n", err); - break; - default: - err = 0; - break; + np = of_get_next_parent(np); } - return notifier_from_errno(err); -} - -static struct notifier_block prom_reconfig_nb = { - .notifier_call = prom_reconfig_notifier, - .priority = 10, /* This one needs to run first */ -}; - -static int __init prom_reconfig_setup(void) -{ - return of_reconfig_notifier_register(&prom_reconfig_nb); + return -1; } -__initcall(prom_reconfig_setup); -#endif +EXPORT_SYMBOL(of_get_ibm_chip_id); -/* Find the device node for a given logical cpu number, also returns the cpu - * local thread number (index in ibm,interrupt-server#s) if relevant and - * asked for (non NULL) +/** + * cpu_to_chip_id - Return the cpus chip-id + * @cpu: The logical cpu number. + * + * Return the value of the ibm,chip-id property corresponding to the given + * logical cpu number. If the chip-id can not be found, returns -1. */ -struct device_node *of_get_cpu_node(int cpu, unsigned int *thread) +int cpu_to_chip_id(int cpu) { - int hardid; struct device_node *np; - hardid = get_hard_smp_processor_id(cpu); - - for_each_node_by_type(np, "cpu") { - const u32 *intserv; - unsigned int plen, t; + np = of_get_cpu_node(cpu, NULL); + if (!np) + return -1; - /* Check for ibm,ppc-interrupt-server#s. If it doesn't exist - * fallback to "reg" property and assume no threads - */ - intserv = of_get_property(np, "ibm,ppc-interrupt-server#s", - &plen); - if (intserv == NULL) { - const u32 *reg = of_get_property(np, "reg", NULL); - if (reg == NULL) - continue; - if (*reg == hardid) { - if (thread) - *thread = 0; - return np; - } - } else { - plen /= sizeof(u32); - for (t = 0; t < plen; t++) { - if (hardid == intserv[t]) { - if (thread) - *thread = t; - return np; - } - } - } - } - return NULL; + of_node_put(np); + return of_get_ibm_chip_id(np); } -EXPORT_SYMBOL(of_get_cpu_node); +EXPORT_SYMBOL(cpu_to_chip_id); -#if defined(CONFIG_DEBUG_FS) && defined(DEBUG) -static struct debugfs_blob_wrapper flat_dt_blob; - -static int __init export_flat_device_tree(void) +bool arch_match_cpu_phys_id(int cpu, u64 phys_id) { - struct dentry *d; - - flat_dt_blob.data = initial_boot_params; - flat_dt_blob.size = initial_boot_params->totalsize; - - d = debugfs_create_blob("flat-device-tree", S_IFREG | S_IRUSR, - powerpc_debugfs_root, &flat_dt_blob); - if (!d) - return 1; - - return 0; + return (int)phys_id == get_hard_smp_processor_id(cpu); } -__initcall(export_flat_device_tree); -#endif