--- zzzz-none-000/linux-3.10.107/arch/powerpc/mm/fsl_booke_mmu.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/powerpc/mm/fsl_booke_mmu.c	2021-02-04 17:41:59.000000000 +0000
@@ -52,6 +52,7 @@
 #include <asm/smp.h>
 #include <asm/machdep.h>
 #include <asm/setup.h>
+#include <asm/paca.h>
 
 #include "mmu_decl.h"
 
@@ -66,8 +67,6 @@
 	phys_addr_t phys;
 } tlbcam_addrs[NUM_TLBCAMS];
 
-extern unsigned int tlbcam_index;
-
 unsigned long tlbcam_sz(int idx)
 {
 	return tlbcam_addrs[idx].limit - tlbcam_addrs[idx].start + 1;
@@ -113,7 +112,7 @@
 
 	tsize = __ilog2(size) - 10;
 
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) || defined(CONFIG_PPC_E500MC)
 	if ((flags & _PAGE_NO_CACHE) == 0)
 		flags |= _PAGE_COHERENT;
 #endif
@@ -142,8 +141,6 @@
 	tlbcam_addrs[index].start = virt;
 	tlbcam_addrs[index].limit = virt + size - 1;
 	tlbcam_addrs[index].phys = phys;
-
-	loadcam_entry(index);
 }
 
 unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
@@ -171,11 +168,11 @@
 	return 1UL << camsize;
 }
 
-unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
+static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt,
+					unsigned long ram, int max_cam_idx,
+					bool dryrun)
 {
 	int i;
-	unsigned long virt = PAGE_OFFSET;
-	phys_addr_t phys = memstart_addr;
 	unsigned long amount_mapped = 0;
 
 	/* Calculate CAM values */
@@ -183,18 +180,39 @@
 		unsigned long cam_sz;
 
 		cam_sz = calc_cam_sz(ram, virt, phys);
-		settlbcam(i, virt, phys, cam_sz, PAGE_KERNEL_X, 0);
+		if (!dryrun)
+			settlbcam(i, virt, phys, cam_sz,
+				  pgprot_val(PAGE_KERNEL_X), 0);
 
 		ram -= cam_sz;
 		amount_mapped += cam_sz;
 		virt += cam_sz;
 		phys += cam_sz;
 	}
+
+	if (dryrun)
+		return amount_mapped;
+
+	loadcam_multi(0, i, max_cam_idx);
 	tlbcam_index = i;
 
+#ifdef CONFIG_PPC64
+	get_paca()->tcd.esel_next = i;
+	get_paca()->tcd.esel_max = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY;
+	get_paca()->tcd.esel_first = i;
+#endif
+
 	return amount_mapped;
 }
 
+unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx, bool dryrun)
+{
+	unsigned long virt = PAGE_OFFSET;
+	phys_addr_t phys = memstart_addr;
+
+	return map_mem_in_cams_addr(phys, virt, ram, max_cam_idx, dryrun);
+}
+
 #ifdef CONFIG_PPC32
 
 #if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS)
@@ -222,7 +240,9 @@
 	/* adjust lowmem size to __max_low_memory */
 	ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem);
 
-	__max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM);
+	i = switch_to_as1();
+	__max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM, false);
+	restore_to_as0(i, 0, 0, 1);
 
 	pr_info("Memory CAM mapping: ");
 	for (i = 0; i < tlbcam_index - 1; i++)
@@ -241,4 +261,64 @@
 	/* 64M mapped initially according to head_fsl_booke.S */
 	memblock_set_current_limit(min_t(u64, limit, 0x04000000));
 }
+
+#ifdef CONFIG_RELOCATABLE
+int __initdata is_second_reloc;
+notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start)
+{
+	unsigned long base = KERNELBASE;
+
+	kernstart_addr = start;
+	if (is_second_reloc) {
+		virt_phys_offset = PAGE_OFFSET - memstart_addr;
+		return;
+	}
+
+	/*
+	 * Relocatable kernel support based on processing of dynamic
+	 * relocation entries. Before we get the real memstart_addr,
+	 * We will compute the virt_phys_offset like this:
+	 * virt_phys_offset = stext.run - kernstart_addr
+	 *
+	 * stext.run = (KERNELBASE & ~0x3ffffff) +
+	 *				(kernstart_addr & 0x3ffffff)
+	 * When we relocate, we have :
+	 *
+	 *	(kernstart_addr & 0x3ffffff) = (stext.run & 0x3ffffff)
+	 *
+	 * hence:
+	 *  virt_phys_offset = (KERNELBASE & ~0x3ffffff) -
+	 *                              (kernstart_addr & ~0x3ffffff)
+	 *
+	 */
+	start &= ~0x3ffffff;
+	base &= ~0x3ffffff;
+	virt_phys_offset = base - start;
+	early_get_first_memblock_info(__va(dt_ptr), NULL);
+	/*
+	 * We now get the memstart_addr, then we should check if this
+	 * address is the same as what the PAGE_OFFSET map to now. If
+	 * not we have to change the map of PAGE_OFFSET to memstart_addr
+	 * and do a second relocation.
+	 */
+	if (start != memstart_addr) {
+		int n;
+		long offset = start - memstart_addr;
+
+		is_second_reloc = 1;
+		n = switch_to_as1();
+		/* map a 64M area for the second relocation */
+		if (memstart_addr > start)
+			map_mem_in_cams(0x4000000, CONFIG_LOWMEM_CAM_NUM,
+					false);
+		else
+			map_mem_in_cams_addr(start, PAGE_OFFSET + offset,
+					0x4000000, CONFIG_LOWMEM_CAM_NUM,
+					false);
+		restore_to_as0(n, offset, __va(dt_ptr), 1);
+		/* We should never reach here */
+		panic("Relocation error");
+	}
+}
+#endif
 #endif