--- zzzz-none-000/linux-3.10.107/arch/powerpc/platforms/powermac/feature.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/arch/powerpc/platforms/powermac/feature.c 2021-02-04 17:41:59.000000000 +0000 @@ -158,7 +158,7 @@ return 0; } -#ifndef CONFIG_POWER4 +#ifndef CONFIG_PPC64 static long ohare_htw_scc_enable(struct device_node *node, long param, long value) @@ -1318,7 +1318,7 @@ } -#endif /* CONFIG_POWER4 */ +#endif /* CONFIG_PPC64 */ static long core99_read_gpio(struct device_node *node, long param, long value) @@ -1338,7 +1338,7 @@ return 0; } -#ifdef CONFIG_POWER4 +#ifdef CONFIG_PPC64 static long g5_gmac_enable(struct device_node *node, long param, long value) { struct macio_chip *macio = &macio_chips[0]; @@ -1550,9 +1550,9 @@ if (uninorth_maj == 3) UN_OUT(U3_API_PHY_CONFIG_1, 0); } -#endif /* CONFIG_POWER4 */ +#endif /* CONFIG_PPC64 */ -#ifndef CONFIG_POWER4 +#ifndef CONFIG_PPC64 #ifdef CONFIG_PM @@ -1864,7 +1864,7 @@ return 0; } -#endif /* CONFIG_POWER4 */ +#endif /* CONFIG_PPC64 */ static long generic_dev_can_wake(struct device_node *node, long param, long value) @@ -1906,7 +1906,7 @@ { 0, NULL } }; -#ifndef CONFIG_POWER4 +#ifndef CONFIG_PPC64 /* OHare based motherboards. Currently, we only use these on the * 2400,3400 and 3500 series powerbooks. Some older desktops seem @@ -2056,7 +2056,7 @@ { 0, NULL } }; -#else /* CONFIG_POWER4 */ +#else /* CONFIG_PPC64 */ /* G5 features */ @@ -2074,10 +2074,10 @@ { 0, NULL } }; -#endif /* CONFIG_POWER4 */ +#endif /* CONFIG_PPC64 */ static struct pmac_mb_def pmac_mb_defs[] = { -#ifndef CONFIG_POWER4 +#ifndef CONFIG_PPC64 /* * Desktops */ @@ -2342,7 +2342,7 @@ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, }, -#else /* CONFIG_POWER4 */ +#else /* CONFIG_PPC64 */ { "PowerMac7,2", "PowerMac G5", PMAC_TYPE_POWERMAC_G5, g5_features, 0, @@ -2373,7 +2373,7 @@ 0, }, #endif /* CONFIG_PPC64 */ -#endif /* CONFIG_POWER4 */ +#endif /* CONFIG_PPC64 */ }; /* @@ -2441,7 +2441,7 @@ /* Fallback to selection depending on mac-io chip type */ switch(macio->type) { -#ifndef CONFIG_POWER4 +#ifndef CONFIG_PPC64 case macio_grand_central: pmac_mb.model_id = PMAC_TYPE_PSURGE; pmac_mb.model_name = "Unknown PowerSurge"; @@ -2475,7 +2475,7 @@ pmac_mb.model_name = "Unknown Intrepid-based"; pmac_mb.features = intrepid_features; break; -#else /* CONFIG_POWER4 */ +#else /* CONFIG_PPC64 */ case macio_keylargo2: pmac_mb.model_id = PMAC_TYPE_UNKNOWN_K2; pmac_mb.model_name = "Unknown K2-based"; @@ -2486,13 +2486,13 @@ pmac_mb.model_name = "Unknown Shasta-based"; pmac_mb.features = g5_features; break; -#endif /* CONFIG_POWER4 */ +#endif /* CONFIG_PPC64 */ default: ret = -ENODEV; goto done; } found: -#ifndef CONFIG_POWER4 +#ifndef CONFIG_PPC64 /* Fixup Hooper vs. Comet */ if (pmac_mb.model_id == PMAC_TYPE_HOOPER) { u32 __iomem * mach_id_ptr = ioremap(0xf3000034, 4); @@ -2546,9 +2546,9 @@ */ powersave_lowspeed = 1; -#else /* CONFIG_POWER4 */ +#else /* CONFIG_PPC64 */ powersave_nap = 1; -#endif /* CONFIG_POWER4 */ +#endif /* CONFIG_PPC64 */ /* Check for "mobile" machine */ if (model && (strncmp(model, "PowerBook", 9) == 0 @@ -2786,7 +2786,7 @@ MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); } -#ifdef CONFIG_POWER4 +#ifdef CONFIG_PPC64 if (macio_chips[0].type == macio_keylargo2 || macio_chips[0].type == macio_shasta) { #ifndef CONFIG_SMP @@ -2805,28 +2805,23 @@ /* Enable GMAC for now for PCI probing. It will be disabled * later on after PCI probe */ - np = of_find_node_by_name(NULL, "ethernet"); - while(np) { + for_each_node_by_name(np, "ethernet") if (of_device_is_compatible(np, "K2-GMAC")) g5_gmac_enable(np, 0, 1); - np = of_find_node_by_name(np, "ethernet"); - } /* Enable FW before PCI probe. Will be disabled later on * Note: We should have a batter way to check that we are * dealing with uninorth internal cell and not a PCI cell * on the external PCI. The code below works though. */ - np = of_find_node_by_name(NULL, "firewire"); - while(np) { + for_each_node_by_name(np, "firewire") { if (of_device_is_compatible(np, "pci106b,5811")) { macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED; g5_fw_enable(np, 0, 1); } - np = of_find_node_by_name(np, "firewire"); } } -#else /* CONFIG_POWER4 */ +#else /* CONFIG_PPC64 */ if (macio_chips[0].type == macio_keylargo || macio_chips[0].type == macio_pangea || @@ -2834,13 +2829,11 @@ /* Enable GMAC for now for PCI probing. It will be disabled * later on after PCI probe */ - np = of_find_node_by_name(NULL, "ethernet"); - while(np) { + for_each_node_by_name(np, "ethernet") { if (np->parent && of_device_is_compatible(np->parent, "uni-north") && of_device_is_compatible(np, "gmac")) core99_gmac_enable(np, 0, 1); - np = of_find_node_by_name(np, "ethernet"); } /* Enable FW before PCI probe. Will be disabled later on @@ -2848,8 +2841,7 @@ * dealing with uninorth internal cell and not a PCI cell * on the external PCI. The code below works though. */ - np = of_find_node_by_name(NULL, "firewire"); - while(np) { + for_each_node_by_name(np, "firewire") { if (np->parent && of_device_is_compatible(np->parent, "uni-north") && (of_device_is_compatible(np, "pci106b,18") || @@ -2858,18 +2850,16 @@ macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED; core99_firewire_enable(np, 0, 1); } - np = of_find_node_by_name(np, "firewire"); } /* Enable ATA-100 before PCI probe. */ np = of_find_node_by_name(NULL, "ata-6"); - while(np) { + for_each_node_by_name(np, "ata-6") { if (np->parent && of_device_is_compatible(np->parent, "uni-north") && of_device_is_compatible(np, "kauai-ata")) { core99_ata100_enable(np, 1); } - np = of_find_node_by_name(np, "ata-6"); } /* Switch airport off */ @@ -2895,7 +2885,7 @@ MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N); } -#endif /* CONFIG_POWER4 */ +#endif /* CONFIG_PPC64 */ /* On all machines, switch modem & serial ports off */ for_each_node_by_name(np, "ch-a")