--- zzzz-none-000/linux-3.10.107/arch/powerpc/platforms/pseries/pci_dlpar.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/powerpc/platforms/pseries/pci_dlpar.c	2021-02-04 17:41:59.000000000 +0000
@@ -32,20 +32,22 @@
 #include <asm/firmware.h>
 #include <asm/eeh.h>
 
+#include "pseries.h"
+
 static struct pci_bus *
 find_bus_among_children(struct pci_bus *bus,
                         struct device_node *dn)
 {
 	struct pci_bus *child = NULL;
-	struct list_head *tmp;
+	struct pci_bus *tmp;
 	struct device_node *busdn;
 
 	busdn = pci_bus_to_OF_node(bus);
 	if (busdn == dn)
 		return bus;
 
-	list_for_each(tmp, &bus->children) {
-		child = find_bus_among_children(pci_bus_b(tmp), dn);
+	list_for_each_entry(tmp, &bus->children, node) {
+		child = find_bus_among_children(tmp, dn);
 		if (child)
 			break;
 	};
@@ -64,91 +66,6 @@
 }
 EXPORT_SYMBOL_GPL(pcibios_find_pci_bus);
 
-/**
- * __pcibios_remove_pci_devices - remove all devices under this bus
- * @bus: the indicated PCI bus
- * @purge_pe: destroy the PE on removal of PCI devices
- *
- * Remove all of the PCI devices under this bus both from the
- * linux pci device tree, and from the powerpc EEH address cache.
- * By default, the corresponding PE will be destroied during the
- * normal PCI hotplug path. For PCI hotplug during EEH recovery,
- * the corresponding PE won't be destroied and deallocated.
- */
-void __pcibios_remove_pci_devices(struct pci_bus *bus, int purge_pe)
-{
-	struct pci_dev *dev, *tmp;
-	struct pci_bus *child_bus;
-
-	/* First go down child busses */
-	list_for_each_entry(child_bus, &bus->children, node)
-		__pcibios_remove_pci_devices(child_bus, purge_pe);
-
-	pr_debug("PCI: Removing devices on bus %04x:%02x\n",
-		pci_domain_nr(bus),  bus->number);
-	list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
-		pr_debug("     * Removing %s...\n", pci_name(dev));
-		eeh_remove_bus_device(dev, purge_pe);
-		pci_stop_and_remove_bus_device(dev);
-	}
-}
-
-/**
- * pcibios_remove_pci_devices - remove all devices under this bus
- *
- * Remove all of the PCI devices under this bus both from the
- * linux pci device tree, and from the powerpc EEH address cache.
- */
-void pcibios_remove_pci_devices(struct pci_bus *bus)
-{
-	__pcibios_remove_pci_devices(bus, 1);
-}
-EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices);
-
-/**
- * pcibios_add_pci_devices - adds new pci devices to bus
- *
- * This routine will find and fixup new pci devices under
- * the indicated bus. This routine presumes that there
- * might already be some devices under this bridge, so
- * it carefully tries to add only new devices.  (And that
- * is how this routine differs from other, similar pcibios
- * routines.)
- */
-void pcibios_add_pci_devices(struct pci_bus * bus)
-{
-	int slotno, num, mode, pass, max;
-	struct pci_dev *dev;
-	struct device_node *dn = pci_bus_to_OF_node(bus);
-
-	eeh_add_device_tree_early(dn);
-
-	mode = PCI_PROBE_NORMAL;
-	if (ppc_md.pci_probe_mode)
-		mode = ppc_md.pci_probe_mode(bus);
-
-	if (mode == PCI_PROBE_DEVTREE) {
-		/* use ofdt-based probe */
-		of_rescan_bus(dn, bus);
-	} else if (mode == PCI_PROBE_NORMAL) {
-		/* use legacy probe */
-		slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
-		num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
-		if (!num)
-			return;
-		pcibios_setup_bus_devices(bus);
-		max = bus->busn_res.start;
-		for (pass=0; pass < 2; pass++)
-			list_for_each_entry(dev, &bus->devices, bus_list) {
-			if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
-			    dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
-				max = pci_scan_bridge(bus, dev, max, pass);
-		}
-	}
-	pcibios_finish_adding_to_bus(bus);
-}
-EXPORT_SYMBOL_GPL(pcibios_add_pci_devices);
-
 struct pci_controller *init_phb_dynamic(struct device_node *dn)
 {
 	struct pci_controller *phb;
@@ -160,6 +77,7 @@
 		return NULL;
 	rtas_setup_phb(phb);
 	pci_process_bridge_OF_ranges(phb, dn, 0);
+	phb->controller_ops = pseries_pci_controller_ops;
 
 	pci_devs_phb_init_dynamic(phb);
 
@@ -167,7 +85,7 @@
 	eeh_dev_phb_init_dynamic(phb);
 
 	if (dn->child)
-		eeh_add_device_tree_early(dn);
+		eeh_add_device_tree_early(PCI_DN(dn));
 
 	pcibios_scan_phb(phb);
 	pcibios_finish_adding_to_bus(phb->bus);
@@ -203,10 +121,10 @@
 		}
 	}
 
-	/* Unregister the bridge device from sysfs and remove the PCI bus */
-	device_unregister(b->bridge);
+	/* Remove the PCI bus and unregister the bridge device from sysfs */
 	phb->bus = NULL;
 	pci_remove_bus(b);
+	device_unregister(b->bridge);
 
 	/* Now release the IO resource */
 	if (res->flags & IORESOURCE_IO)