--- zzzz-none-000/linux-3.10.107/arch/x86/kernel/quirks.c	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/arch/x86/kernel/quirks.c	2021-02-04 17:41:59.000000000 +0000
@@ -498,6 +498,24 @@
 }
 
 /*
+ * According to the datasheet e6xx systems have the HPET hardwired to
+ * 0xfed00000
+ */
+static void e6xx_force_enable_hpet(struct pci_dev *dev)
+{
+	if (hpet_address || force_hpet_address)
+		return;
+
+	force_hpet_address = 0xFED00000;
+	force_hpet_resume_type = NONE_FORCE_HPET_RESUME;
+	dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at "
+		"0x%lx\n", force_hpet_address);
+	return;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E6XX_CU,
+			 e6xx_force_enable_hpet);
+
+/*
  * HPET MSI on some boards (ATI SB700/SB800) has side effect on
  * floppy DMA. Disable HPET MSI on such platforms.
  * See erratum #27 (Misinterpreted MSI Requests May Result in
@@ -506,7 +524,7 @@
  */
 static void force_disable_hpet_msi(struct pci_dev *unused)
 {
-	hpet_msi_disable = 1;
+	hpet_msi_disable = true;
 }
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
@@ -571,3 +589,40 @@
 			quirk_amd_nb_node);
 
 #endif
+
+#ifdef CONFIG_PCI
+/*
+ * Processor does not ensure DRAM scrub read/write sequence
+ * is atomic wrt accesses to CC6 save state area. Therefore
+ * if a concurrent scrub read/write access is to same address
+ * the entry may appear as if it is not written. This quirk
+ * applies to Fam16h models 00h-0Fh
+ *
+ * See "Revision Guide" for AMD F16h models 00h-0fh,
+ * document 51810 rev. 3.04, Nov 2013
+ */
+static void amd_disable_seq_and_redirect_scrub(struct pci_dev *dev)
+{
+	u32 val;
+
+	/*
+	 * Suggested workaround:
+	 * set D18F3x58[4:0] = 00h and set D18F3x5C[0] = 0b
+	 */
+	pci_read_config_dword(dev, 0x58, &val);
+	if (val & 0x1F) {
+		val &= ~(0x1F);
+		pci_write_config_dword(dev, 0x58, val);
+	}
+
+	pci_read_config_dword(dev, 0x5C, &val);
+	if (val & BIT(0)) {
+		val &= ~BIT(0);
+		pci_write_config_dword(dev, 0x5c, val);
+	}
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F3,
+			amd_disable_seq_and_redirect_scrub);
+
+#endif