--- zzzz-none-000/linux-3.10.107/arch/x86/kernel/reboot.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/arch/x86/kernel/reboot.c 2021-02-04 17:41:59.000000000 +0000 @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -28,6 +29,7 @@ #include #include #include +#include /* * Power off function, if any @@ -36,22 +38,6 @@ EXPORT_SYMBOL(pm_power_off); static const struct desc_ptr no_idt = {}; -static int reboot_mode; -enum reboot_type reboot_type = BOOT_ACPI; -int reboot_force; - -/* - * This variable is used privately to keep track of whether or not - * reboot_type is still set to its default value (i.e., reboot= hasn't - * been set on the command line). This is needed so that we can - * suppress DMI scanning for reboot quirks. Without it, it's - * impossible to override a faulty reboot quirk without recompiling. - */ -static int reboot_default = 1; - -#ifdef CONFIG_SMP -static int reboot_cpu = -1; -#endif /* * This is set if we need to go through the 'emergency' path. @@ -64,79 +50,6 @@ bool port_cf9_safe = false; /* - * reboot=b[ios] | s[mp] | t[riple] | k[bd] | e[fi] [, [w]arm | [c]old] | p[ci] - * warm Don't set the cold reboot flag - * cold Set the cold reboot flag - * bios Reboot by jumping through the BIOS - * smp Reboot by executing reset on BSP or other CPU - * triple Force a triple fault (init) - * kbd Use the keyboard controller. cold reset (default) - * acpi Use the RESET_REG in the FADT - * efi Use efi reset_system runtime service - * pci Use the so-called "PCI reset register", CF9 - * force Avoid anything that could hang. - */ -static int __init reboot_setup(char *str) -{ - for (;;) { - /* - * Having anything passed on the command line via - * reboot= will cause us to disable DMI checking - * below. - */ - reboot_default = 0; - - switch (*str) { - case 'w': - reboot_mode = 0x1234; - break; - - case 'c': - reboot_mode = 0; - break; - -#ifdef CONFIG_SMP - case 's': - if (isdigit(*(str+1))) { - reboot_cpu = (int) (*(str+1) - '0'); - if (isdigit(*(str+2))) - reboot_cpu = reboot_cpu*10 + (int)(*(str+2) - '0'); - } - /* - * We will leave sorting out the final value - * when we are ready to reboot, since we might not - * have detected BSP APIC ID or smp_num_cpu - */ - break; -#endif /* CONFIG_SMP */ - - case 'b': - case 'a': - case 'k': - case 't': - case 'e': - case 'p': - reboot_type = *str; - break; - - case 'f': - reboot_force = 1; - break; - } - - str = strchr(str, ','); - if (str) - str++; - else - break; - } - return 1; -} - -__setup("reboot=", reboot_setup); - - -/* * Reboot options and system auto-detection code provided by * Dell Inc. so their systems "just work". :-) */ @@ -150,7 +63,7 @@ if (reboot_type != BOOT_BIOS) { reboot_type = BOOT_BIOS; pr_info("%s series board detected. Selecting %s-method for reboots.\n", - "BIOS", d->ident); + d->ident, "BIOS"); } return 0; } @@ -203,10 +116,10 @@ */ static int __init set_pci_reboot(const struct dmi_system_id *d) { - if (reboot_type != BOOT_CF9) { - reboot_type = BOOT_CF9; + if (reboot_type != BOOT_CF9_FORCE) { + reboot_type = BOOT_CF9_FORCE; pr_info("%s series board detected. Selecting %s-method for reboots.\n", - "PCI", d->ident); + d->ident, "PCI"); } return 0; } @@ -216,7 +129,7 @@ if (reboot_type != BOOT_KBD) { reboot_type = BOOT_KBD; pr_info("%s series board detected. Selecting %s-method for reboot.\n", - "KBD", d->ident); + d->ident, "KBD"); } return 0; } @@ -225,263 +138,308 @@ * This is a single dmi_table handling all reboot quirks. */ static struct dmi_system_id __initdata reboot_dmi_table[] = { - { /* Handle problems with rebooting on Dell E520's */ - .callback = set_bios_reboot, - .ident = "Dell E520", + + /* Acer */ + { /* Handle reboot issue on Acer Aspire one */ + .callback = set_kbd_reboot, + .ident = "Acer Aspire One A110", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM061"), + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "AOA110"), }, }, - { /* Handle problems with rebooting on Dell 1300's */ - .callback = set_bios_reboot, - .ident = "Dell PowerEdge 1300", + + /* Apple */ + { /* Handle problems with rebooting on Apple MacBook5 */ + .callback = set_pci_reboot, + .ident = "Apple MacBook5", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1300/"), + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5"), }, }, - { /* Handle problems with rebooting on Dell 300's */ - .callback = set_bios_reboot, - .ident = "Dell PowerEdge 300", + { /* Handle problems with rebooting on Apple MacBookPro5 */ + .callback = set_pci_reboot, + .ident = "Apple MacBookPro5", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 300/"), + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5"), }, }, - { /* Handle problems with rebooting on Dell Optiplex 745's SFF */ - .callback = set_bios_reboot, - .ident = "Dell OptiPlex 745", + { /* Handle problems with rebooting on Apple Macmini3,1 */ + .callback = set_pci_reboot, + .ident = "Apple Macmini3,1", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"), + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Macmini3,1"), }, }, - { /* Handle problems with rebooting on Dell Optiplex 745's DFF */ - .callback = set_bios_reboot, - .ident = "Dell OptiPlex 745", + { /* Handle problems with rebooting on the iMac9,1. */ + .callback = set_pci_reboot, + .ident = "Apple iMac9,1", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"), - DMI_MATCH(DMI_BOARD_NAME, "0MM599"), + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1"), }, }, - { /* Handle problems with rebooting on Dell Optiplex 745 with 0KW626 */ - .callback = set_bios_reboot, - .ident = "Dell OptiPlex 745", + { /* Handle problems with rebooting on the iMac10,1. */ + .callback = set_pci_reboot, + .ident = "Apple iMac10,1", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"), - DMI_MATCH(DMI_BOARD_NAME, "0KW626"), + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "iMac10,1"), }, }, - { /* Handle problems with rebooting on Dell Optiplex 330 with 0KP561 */ + + /* ASRock */ + { /* Handle problems with rebooting on ASRock Q1900DC-ITX */ + .callback = set_pci_reboot, + .ident = "ASRock Q1900DC-ITX", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASRock"), + DMI_MATCH(DMI_BOARD_NAME, "Q1900DC-ITX"), + }, + }, + + /* ASUS */ + { /* Handle problems with rebooting on ASUS P4S800 */ .callback = set_bios_reboot, - .ident = "Dell OptiPlex 330", + .ident = "ASUS P4S800", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 330"), - DMI_MATCH(DMI_BOARD_NAME, "0KP561"), + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "P4S800"), }, }, - { /* Handle problems with rebooting on Dell Optiplex 360 with 0T656F */ + + /* Certec */ + { /* Handle problems with rebooting on Certec BPC600 */ + .callback = set_pci_reboot, + .ident = "Certec BPC600", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Certec"), + DMI_MATCH(DMI_PRODUCT_NAME, "BPC600"), + }, + }, + + /* Dell */ + { /* Handle problems with rebooting on Dell DXP061 */ .callback = set_bios_reboot, - .ident = "Dell OptiPlex 360", + .ident = "Dell DXP061", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 360"), - DMI_MATCH(DMI_BOARD_NAME, "0T656F"), + DMI_MATCH(DMI_PRODUCT_NAME, "Dell DXP061"), }, }, - { /* Handle problems with rebooting on Dell OptiPlex 760 with 0G919G */ + { /* Handle problems with rebooting on Dell E520's */ .callback = set_bios_reboot, - .ident = "Dell OptiPlex 760", + .ident = "Dell E520", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 760"), - DMI_MATCH(DMI_BOARD_NAME, "0G919G"), + DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM061"), }, }, - { /* Handle problems with rebooting on Dell 2400's */ - .callback = set_bios_reboot, - .ident = "Dell PowerEdge 2400", + { /* Handle problems with rebooting on the Latitude E5410. */ + .callback = set_pci_reboot, + .ident = "Dell Latitude E5410", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"), + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E5410"), }, }, - { /* Handle problems with rebooting on Dell T5400's */ - .callback = set_bios_reboot, - .ident = "Dell Precision T5400", + { /* Handle problems with rebooting on the Latitude E5420. */ + .callback = set_pci_reboot, + .ident = "Dell Latitude E5420", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T5400"), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E5420"), }, }, - { /* Handle problems with rebooting on Dell T7400's */ - .callback = set_bios_reboot, - .ident = "Dell Precision T7400", + { /* Handle problems with rebooting on the Latitude E6320. */ + .callback = set_pci_reboot, + .ident = "Dell Latitude E6320", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T7400"), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6320"), }, }, - { /* Handle problems with rebooting on HP laptops */ - .callback = set_bios_reboot, - .ident = "HP Compaq Laptop", + { /* Handle problems with rebooting on the Latitude E6420. */ + .callback = set_pci_reboot, + .ident = "Dell Latitude E6420", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq"), + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6420"), }, }, - { /* Handle problems with rebooting on Dell XPS710 */ + { /* Handle problems with rebooting on Dell Optiplex 330 with 0KP561 */ .callback = set_bios_reboot, - .ident = "Dell XPS710", + .ident = "Dell OptiPlex 330", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Dell XPS710"), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 330"), + DMI_MATCH(DMI_BOARD_NAME, "0KP561"), }, }, - { /* Handle problems with rebooting on Dell DXP061 */ + { /* Handle problems with rebooting on Dell Optiplex 360 with 0T656F */ .callback = set_bios_reboot, - .ident = "Dell DXP061", + .ident = "Dell OptiPlex 360", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Dell DXP061"), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 360"), + DMI_MATCH(DMI_BOARD_NAME, "0T656F"), }, }, - { /* Handle problems with rebooting on Sony VGN-Z540N */ + { /* Handle problems with rebooting on Dell Optiplex 745's SFF */ .callback = set_bios_reboot, - .ident = "Sony VGN-Z540N", + .ident = "Dell OptiPlex 745", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"), + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"), }, }, - { /* Handle problems with rebooting on ASUS P4S800 */ + { /* Handle problems with rebooting on Dell Optiplex 745's DFF */ .callback = set_bios_reboot, - .ident = "ASUS P4S800", + .ident = "Dell OptiPlex 745", .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "P4S800"), + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"), + DMI_MATCH(DMI_BOARD_NAME, "0MM599"), }, }, - { /* Handle problems with rebooting on the iMac10,1. */ - .callback = set_pci_reboot, - .ident = "Apple iMac10,1", + { /* Handle problems with rebooting on Dell Optiplex 745 with 0KW626 */ + .callback = set_bios_reboot, + .ident = "Dell OptiPlex 745", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "iMac10,1"), + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"), + DMI_MATCH(DMI_BOARD_NAME, "0KW626"), }, }, - - { /* Handle reboot issue on Acer Aspire one */ - .callback = set_kbd_reboot, - .ident = "Acer Aspire One A110", + { /* Handle problems with rebooting on Dell OptiPlex 760 with 0G919G */ + .callback = set_bios_reboot, + .ident = "Dell OptiPlex 760", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Acer"), - DMI_MATCH(DMI_PRODUCT_NAME, "AOA110"), + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 760"), + DMI_MATCH(DMI_BOARD_NAME, "0G919G"), }, }, - { /* Handle problems with rebooting on Apple MacBook5 */ + { /* Handle problems with rebooting on the OptiPlex 990. */ .callback = set_pci_reboot, - .ident = "Apple MacBook5", + .ident = "Dell OptiPlex 990", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5"), + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"), }, }, - { /* Handle problems with rebooting on Apple MacBookPro5 */ - .callback = set_pci_reboot, - .ident = "Apple MacBookPro5", + { /* Handle problems with rebooting on Dell 300's */ + .callback = set_bios_reboot, + .ident = "Dell PowerEdge 300", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5"), + DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 300/"), }, }, - { /* Handle problems with rebooting on Apple Macmini3,1 */ - .callback = set_pci_reboot, - .ident = "Apple Macmini3,1", + { /* Handle problems with rebooting on Dell 1300's */ + .callback = set_bios_reboot, + .ident = "Dell PowerEdge 1300", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Macmini3,1"), + DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1300/"), }, }, - { /* Handle problems with rebooting on the iMac9,1. */ - .callback = set_pci_reboot, - .ident = "Apple iMac9,1", + { /* Handle problems with rebooting on Dell 2400's */ + .callback = set_bios_reboot, + .ident = "Dell PowerEdge 2400", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1"), + DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"), }, }, - { /* Handle problems with rebooting on the Latitude E6320. */ + { /* Handle problems with rebooting on the Dell PowerEdge C6100. */ .callback = set_pci_reboot, - .ident = "Dell Latitude E6320", + .ident = "Dell PowerEdge C6100", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6320"), + DMI_MATCH(DMI_SYS_VENDOR, "Dell"), + DMI_MATCH(DMI_PRODUCT_NAME, "C6100"), }, }, - { /* Handle problems with rebooting on the Latitude E5420. */ + { /* Handle problems with rebooting on the Precision M6600. */ .callback = set_pci_reboot, - .ident = "Dell Latitude E5420", + .ident = "Dell Precision M6600", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E5420"), + DMI_MATCH(DMI_PRODUCT_NAME, "Precision M6600"), }, }, - { /* Handle problems with rebooting on the Latitude E6420. */ - .callback = set_pci_reboot, - .ident = "Dell Latitude E6420", + { /* Handle problems with rebooting on Dell T5400's */ + .callback = set_bios_reboot, + .ident = "Dell Precision T5400", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6420"), + DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T5400"), }, }, - { /* Handle problems with rebooting on the OptiPlex 990. */ - .callback = set_pci_reboot, - .ident = "Dell OptiPlex 990", + { /* Handle problems with rebooting on Dell T7400's */ + .callback = set_bios_reboot, + .ident = "Dell Precision T7400", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"), + DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T7400"), }, }, - { /* Handle problems with rebooting on the Precision M6600. */ - .callback = set_pci_reboot, - .ident = "Dell OptiPlex 990", + { /* Handle problems with rebooting on Dell XPS710 */ + .callback = set_bios_reboot, + .ident = "Dell XPS710", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Precision M6600"), + DMI_MATCH(DMI_PRODUCT_NAME, "Dell XPS710"), }, }, - { /* Handle problems with rebooting on the Dell PowerEdge C6100. */ - .callback = set_pci_reboot, - .ident = "Dell PowerEdge C6100", + + /* Hewlett-Packard */ + { /* Handle problems with rebooting on HP laptops */ + .callback = set_bios_reboot, + .ident = "HP Compaq Laptop", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "C6100"), + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq"), }, }, - { /* Some C6100 machines were shipped with vendor being 'Dell'. */ - .callback = set_pci_reboot, - .ident = "Dell PowerEdge C6100", + + /* Sony */ + { /* Handle problems with rebooting on Sony VGN-Z540N */ + .callback = set_bios_reboot, + .ident = "Sony VGN-Z540N", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell"), - DMI_MATCH(DMI_PRODUCT_NAME, "C6100"), + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"), }, }, + { } }; static int __init reboot_init(void) { + int rv; + /* * Only do the DMI check if reboot_type hasn't been overridden * on the command line */ - if (reboot_default) - dmi_check_system(reboot_dmi_table); + if (!reboot_default) + return 0; + + /* + * The DMI quirks table takes precedence. If no quirks entry + * matches and the ACPI Hardware Reduced bit is set, force EFI + * reboot. + */ + rv = dmi_check_system(reboot_dmi_table); + + if (!rv && efi_reboot_required()) + reboot_type = BOOT_EFI; + return 0; } core_initcall(reboot_init); @@ -543,23 +501,30 @@ } /* - * Windows compatible x86 hardware expects the following on reboot: + * To the best of our knowledge Windows compatible x86 hardware expects + * the following on reboot: * * 1) If the FADT has the ACPI reboot register flag set, try it * 2) If still alive, write to the keyboard controller * 3) If still alive, write to the ACPI reboot register again * 4) If still alive, write to the keyboard controller again + * 5) If still alive, call the EFI runtime service to reboot + * 6) If no EFI runtime service, call the BIOS to do a reboot + * + * We default to following the same pattern. We also have + * two other reboot methods: 'triple fault' and 'PCI', which + * can be triggered via the reboot= kernel boot option or + * via quirks. * - * If the machine is still alive at this stage, it gives up. We default to - * following the same pattern, except that if we're still alive after (4) we'll - * try to force a triple fault and then cycle between hitting the keyboard - * controller and doing that + * This means that this function can never return, it can misbehave + * by not rebooting properly and hanging. */ static void native_machine_emergency_restart(void) { int i; int attempt = 0; int orig_reboot_type = reboot_type; + unsigned short mode; if (reboot_emergency) emergency_vmx_disable_all(); @@ -567,11 +532,17 @@ tboot_shutdown(TB_SHUTDOWN_REBOOT); /* Tell the BIOS if we want cold or warm reboot */ - *((unsigned short *)__va(0x472)) = reboot_mode; + mode = reboot_mode == REBOOT_WARM ? 0x1234 : 0; + *((unsigned short *)__va(0x472)) = mode; for (;;) { /* Could also try the reset bit in the Hammer NB */ switch (reboot_type) { + case BOOT_ACPI: + acpi_reboot(); + reboot_type = BOOT_KBD; + break; + case BOOT_KBD: mach_reboot_fixups(); /* For board specific fixups */ @@ -585,49 +556,44 @@ attempt = 1; reboot_type = BOOT_ACPI; } else { - reboot_type = BOOT_TRIPLE; + reboot_type = BOOT_EFI; } break; - case BOOT_TRIPLE: - load_idt(&no_idt); - __asm__ __volatile__("int3"); - - reboot_type = BOOT_KBD; + case BOOT_EFI: + efi_reboot(reboot_mode, NULL); + reboot_type = BOOT_BIOS; break; case BOOT_BIOS: machine_real_restart(MRR_BIOS); - reboot_type = BOOT_KBD; + /* We're probably dead after this, but... */ + reboot_type = BOOT_CF9_SAFE; break; - case BOOT_ACPI: - acpi_reboot(); - reboot_type = BOOT_KBD; - break; - - case BOOT_EFI: - if (efi_enabled(EFI_RUNTIME_SERVICES)) - efi.reset_system(reboot_mode ? - EFI_RESET_WARM : - EFI_RESET_COLD, - EFI_SUCCESS, 0, NULL); - reboot_type = BOOT_KBD; - break; - - case BOOT_CF9: + case BOOT_CF9_FORCE: port_cf9_safe = true; /* Fall through */ - case BOOT_CF9_COND: + case BOOT_CF9_SAFE: if (port_cf9_safe) { - u8 cf9 = inb(0xcf9) & ~6; + u8 reboot_code = reboot_mode == REBOOT_WARM ? 0x06 : 0x0E; + u8 cf9 = inb(0xcf9) & ~reboot_code; outb(cf9|2, 0xcf9); /* Request hard reset */ udelay(50); - outb(cf9|6, 0xcf9); /* Actually do the reset */ + /* Actually do the reset */ + outb(cf9|reboot_code, 0xcf9); udelay(50); } + reboot_type = BOOT_TRIPLE; + break; + + case BOOT_TRIPLE: + load_idt(&no_idt); + __asm__ __volatile__("int3"); + + /* We're probably dead after this, but... */ reboot_type = BOOT_KBD; break; } @@ -637,27 +603,26 @@ void native_machine_shutdown(void) { /* Stop the cpus and apics */ -#ifdef CONFIG_SMP - - /* The boot cpu is always logical cpu 0 */ - int reboot_cpu_id = 0; - - /* See if there has been given a command line override */ - if ((reboot_cpu != -1) && (reboot_cpu < nr_cpu_ids) && - cpu_online(reboot_cpu)) - reboot_cpu_id = reboot_cpu; - - /* Make certain the cpu I'm about to reboot on is online */ - if (!cpu_online(reboot_cpu_id)) - reboot_cpu_id = smp_processor_id(); - - /* Make certain I only run on the appropriate processor */ - set_cpus_allowed_ptr(current, cpumask_of(reboot_cpu_id)); +#ifdef CONFIG_X86_IO_APIC + /* + * Disabling IO APIC before local APIC is a workaround for + * erratum AVR31 in "Intel Atom Processor C2000 Product Family + * Specification Update". In this situation, interrupts that target + * a Logical Processor whose Local APIC is either in the process of + * being hardware disabled or software disabled are neither delivered + * nor discarded. When this erratum occurs, the processor may hang. + * + * Even without the erratum, it still makes sense to quiet IO APIC + * before disabling Local APIC. + */ + disable_IO_APIC(); +#endif +#ifdef CONFIG_SMP /* - * O.K Now that I'm on the appropriate processor, stop all of the - * others. Also disable the local irq to not receive the per-cpu - * timer interrupt which may trigger scheduler's load balance. + * Stop all of the others. Also disable the local irq to + * not receive the per-cpu timer interrupt which may trigger + * scheduler's load balance. */ local_irq_disable(); stop_other_cpus(); @@ -665,10 +630,6 @@ lapic_shutdown(); -#ifdef CONFIG_X86_IO_APIC - disable_IO_APIC(); -#endif - #ifdef CONFIG_HPET_TIMER hpet_disable(); #endif @@ -720,7 +681,7 @@ .emergency_restart = native_machine_emergency_restart, .restart = native_machine_restart, .halt = native_machine_halt, -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE .crash_shutdown = native_machine_crash_shutdown, #endif }; @@ -750,7 +711,7 @@ machine_ops.halt(); } -#ifdef CONFIG_KEXEC +#ifdef CONFIG_KEXEC_CORE void machine_crash_shutdown(struct pt_regs *regs) { machine_ops.crash_shutdown(regs);