--- zzzz-none-000/linux-3.10.107/drivers/acpi/acpica/nseval.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/acpi/acpica/nseval.c 2021-02-04 17:41:59.000000000 +0000 @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2013, Intel Corp. + * Copyright (C) 2000 - 2015, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -59,15 +59,14 @@ * * FUNCTION: acpi_ns_evaluate * - * PARAMETERS: info - Evaluation info block, contains: + * PARAMETERS: info - Evaluation info block, contains these fields + * and more: * prefix_node - Prefix or Method/Object Node to execute - * pathname - Name of method to execute, If NULL, the + * relative_path - Name of method to execute, If NULL, the * Node is the object to execute * parameters - List of parameters to pass to the method, * terminated by NULL. Params itself may be * NULL if no parameters are being passed. - * return_object - Where to put method's return value (if - * any). If NULL, no value is returned. * parameter_type - Type of Parameter list * return_object - Where to put method's return value (if * any). If NULL, no value is returned. @@ -82,10 +81,9 @@ * ******************************************************************************/ -acpi_status acpi_ns_evaluate(struct acpi_evaluate_info * info) +acpi_status acpi_ns_evaluate(struct acpi_evaluate_info *info) { acpi_status status; - struct acpi_namespace_node *node; ACPI_FUNCTION_TRACE(ns_evaluate); @@ -93,83 +91,138 @@ return_ACPI_STATUS(AE_BAD_PARAMETER); } - /* Initialize the return value to an invalid object */ - - info->return_object = NULL; - info->param_count = 0; - - if (!info->resolved_node) { + if (!info->node) { /* - * Get the actual namespace node for the target object if we need to. - * Handles these cases: + * Get the actual namespace node for the target object if we + * need to. Handles these cases: * - * 1) Null node, Pathname (absolute path) - * 2) Node, Pathname (path relative to Node) - * 3) Node, Null Pathname + * 1) Null node, valid pathname from root (absolute path) + * 2) Node and valid pathname (path relative to Node) + * 3) Node, Null pathname */ - status = acpi_ns_get_node(info->prefix_node, info->pathname, - ACPI_NS_NO_UPSEARCH, - &info->resolved_node); + status = + acpi_ns_get_node(info->prefix_node, info->relative_pathname, + ACPI_NS_NO_UPSEARCH, &info->node); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } } /* - * For a method alias, we must grab the actual method node so that proper - * scoping context will be established before execution. + * For a method alias, we must grab the actual method node so that + * proper scoping context will be established before execution. */ - if (acpi_ns_get_type(info->resolved_node) == - ACPI_TYPE_LOCAL_METHOD_ALIAS) { - info->resolved_node = + if (acpi_ns_get_type(info->node) == ACPI_TYPE_LOCAL_METHOD_ALIAS) { + info->node = ACPI_CAST_PTR(struct acpi_namespace_node, - info->resolved_node->object); + info->node->object); + } + + /* Complete the info block initialization */ + + info->return_object = NULL; + info->node_flags = info->node->flags; + info->obj_desc = acpi_ns_get_attached_object(info->node); + + ACPI_DEBUG_PRINT((ACPI_DB_NAMES, "%s [%p] Value %p\n", + info->relative_pathname, info->node, + acpi_ns_get_attached_object(info->node))); + + /* Get info if we have a predefined name (_HID, etc.) */ + + info->predefined = + acpi_ut_match_predefined_method(info->node->name.ascii); + + /* Get the full pathname to the object, for use in warning messages */ + + info->full_pathname = acpi_ns_get_external_pathname(info->node); + if (!info->full_pathname) { + return_ACPI_STATUS(AE_NO_MEMORY); } - ACPI_DEBUG_PRINT((ACPI_DB_NAMES, "%s [%p] Value %p\n", info->pathname, - info->resolved_node, - acpi_ns_get_attached_object(info->resolved_node))); + /* Count the number of arguments being passed in */ + + info->param_count = 0; + if (info->parameters) { + while (info->parameters[info->param_count]) { + info->param_count++; + } + + /* Warn on impossible argument count */ + + if (info->param_count > ACPI_METHOD_NUM_ARGS) { + ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname, + ACPI_WARN_ALWAYS, + "Excess arguments (%u) - using only %u", + info->param_count, + ACPI_METHOD_NUM_ARGS)); - node = info->resolved_node; + info->param_count = ACPI_METHOD_NUM_ARGS; + } + } /* - * Two major cases here: + * For predefined names: Check that the declared argument count + * matches the ACPI spec -- otherwise this is a BIOS error. + */ + acpi_ns_check_acpi_compliance(info->full_pathname, info->node, + info->predefined); + + /* + * For all names: Check that the incoming argument count for + * this method/object matches the actual ASL/AML definition. + */ + acpi_ns_check_argument_count(info->full_pathname, info->node, + info->param_count, info->predefined); + + /* For predefined names: Typecheck all incoming arguments */ + + acpi_ns_check_argument_types(info); + + /* + * Three major evaluation cases: * - * 1) The object is a control method -- execute it - * 2) The object is not a method -- just return it's current value + * 1) Object types that cannot be evaluated by definition + * 2) The object is a control method -- execute it + * 3) The object is not a method -- just return it's current value */ - if (acpi_ns_get_type(info->resolved_node) == ACPI_TYPE_METHOD) { + switch (acpi_ns_get_type(info->node)) { + case ACPI_TYPE_DEVICE: + case ACPI_TYPE_EVENT: + case ACPI_TYPE_MUTEX: + case ACPI_TYPE_REGION: + case ACPI_TYPE_THERMAL: + case ACPI_TYPE_LOCAL_SCOPE: + /* + * 1) Disallow evaluation of certain object types. For these, + * object evaluation is undefined and not supported. + */ + ACPI_ERROR((AE_INFO, + "%s: Evaluation of object type [%s] is not supported", + info->full_pathname, + acpi_ut_get_type_name(info->node->type))); + + status = AE_TYPE; + goto cleanup; + + case ACPI_TYPE_METHOD: /* - * 1) Object is a control method - execute it + * 2) Object is a control method - execute it */ /* Verify that there is a method object associated with this node */ - info->obj_desc = - acpi_ns_get_attached_object(info->resolved_node); if (!info->obj_desc) { ACPI_ERROR((AE_INFO, - "Control method has no attached sub-object")); - return_ACPI_STATUS(AE_NULL_OBJECT); + "%s: Method has no attached sub-object", + info->full_pathname)); + status = AE_NULL_OBJECT; + goto cleanup; } - /* Count the number of arguments being passed to the method */ - - if (info->parameters) { - while (info->parameters[info->param_count]) { - if (info->param_count > ACPI_METHOD_MAX_ARG) { - return_ACPI_STATUS(AE_LIMIT); - } - info->param_count++; - } - } - - - ACPI_DUMP_PATHNAME(info->resolved_node, "ACPI: Execute Method", - ACPI_LV_INFO, _COMPONENT); - ACPI_DEBUG_PRINT((ACPI_DB_EXEC, - "Method at AML address %p Length %X\n", + "**** Execute method [%s] at AML address %p length %X\n", + info->full_pathname, info->obj_desc->method.aml_start + 1, info->obj_desc->method.aml_length - 1)); @@ -184,81 +237,62 @@ acpi_ex_enter_interpreter(); status = acpi_ps_execute_method(info); acpi_ex_exit_interpreter(); - } else { + break; + + default: /* - * 2) Object is not a method, return its current value - * - * Disallow certain object types. For these, "evaluation" is undefined. + * 3) All other non-method objects -- get the current object value */ - switch (info->resolved_node->type) { - case ACPI_TYPE_DEVICE: - case ACPI_TYPE_EVENT: - case ACPI_TYPE_MUTEX: - case ACPI_TYPE_REGION: - case ACPI_TYPE_THERMAL: - case ACPI_TYPE_LOCAL_SCOPE: - - ACPI_ERROR((AE_INFO, - "[%4.4s] Evaluation of object type [%s] is not supported", - info->resolved_node->name.ascii, - acpi_ut_get_type_name(info->resolved_node-> - type))); - - return_ACPI_STATUS(AE_TYPE); - - default: - break; - } /* - * Objects require additional resolution steps (e.g., the Node may be - * a field that must be read, etc.) -- we can't just grab the object - * out of the node. + * Some objects require additional resolution steps (e.g., the Node + * may be a field that must be read, etc.) -- we can't just grab + * the object out of the node. * * Use resolve_node_to_value() to get the associated value. * * NOTE: we can get away with passing in NULL for a walk state because - * resolved_node is guaranteed to not be a reference to either a method + * the Node is guaranteed to not be a reference to either a method * local or a method argument (because this interface is never called * from a running method.) * * Even though we do not directly invoke the interpreter for object - * resolution, we must lock it because we could access an opregion. - * The opregion access code assumes that the interpreter is locked. + * resolution, we must lock it because we could access an op_region. + * The op_region access code assumes that the interpreter is locked. */ acpi_ex_enter_interpreter(); - /* Function has a strange interface */ + /* TBD: resolve_node_to_value has a strange interface, fix */ + + info->return_object = + ACPI_CAST_PTR(union acpi_operand_object, info->node); status = - acpi_ex_resolve_node_to_value(&info->resolved_node, NULL); + acpi_ex_resolve_node_to_value(ACPI_CAST_INDIRECT_PTR + (struct acpi_namespace_node, + &info->return_object), NULL); acpi_ex_exit_interpreter(); - /* - * If acpi_ex_resolve_node_to_value() succeeded, the return value was placed - * in resolved_node. - */ - if (ACPI_SUCCESS(status)) { - status = AE_CTRL_RETURN_VALUE; - info->return_object = - ACPI_CAST_PTR(union acpi_operand_object, - info->resolved_node); - - ACPI_DEBUG_PRINT((ACPI_DB_NAMES, - "Returning object %p [%s]\n", - info->return_object, - acpi_ut_get_object_type_name(info-> - return_object))); + if (ACPI_FAILURE(status)) { + info->return_object = NULL; + goto cleanup; } + + ACPI_DEBUG_PRINT((ACPI_DB_NAMES, "Returned object %p [%s]\n", + info->return_object, + acpi_ut_get_object_type_name(info-> + return_object))); + + status = AE_CTRL_RETURN_VALUE; /* Always has a "return value" */ + break; } /* - * Check input argument count against the ASL-defined count for a method. - * Also check predefined names: argument count and return value against - * the ACPI specification. Some incorrect return value types are repaired. + * For predefined names, check the return value against the ACPI + * specification. Some incorrect return value types are repaired. */ - (void)acpi_ns_check_predefined_names(node, info->param_count, - status, &info->return_object); + (void)acpi_ns_check_return_value(info->node, info, info->param_count, + status, &info->return_object); /* Check if there is a return value that must be dealt with */ @@ -278,12 +312,15 @@ ACPI_DEBUG_PRINT((ACPI_DB_NAMES, "*** Completed evaluation of object %s ***\n", - info->pathname)); + info->relative_pathname)); +cleanup: /* * Namespace was unlocked by the handling acpi_ns* function, so we - * just return + * just free the pathname and return */ + ACPI_FREE(info->full_pathname); + info->full_pathname = NULL; return_ACPI_STATUS(status); } @@ -403,7 +440,7 @@ /* Initialize the evaluation information block */ - ACPI_MEMSET(info, 0, sizeof(struct acpi_evaluate_info)); + memset(info, 0, sizeof(struct acpi_evaluate_info)); info->prefix_node = parent_node; /* @@ -428,7 +465,8 @@ status = acpi_ns_evaluate(info); - ACPI_DEBUG_PRINT((ACPI_DB_INIT, "Executed module-level code at %p\n", + ACPI_DEBUG_PRINT((ACPI_DB_INIT_NAMES, + "Executed module-level code at %p\n", method_obj->method.aml_start)); /* Delete a possible implicit return value (in slack mode) */ @@ -449,7 +487,7 @@ parent_node->type = (u8)type; } - exit: +exit: if (parent_obj) { acpi_ut_remove_reference(parent_obj); }