--- zzzz-none-000/linux-3.10.107/drivers/acpi/acpica/utstring.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/acpi/acpica/utstring.c 2021-02-04 17:41:59.000000000 +0000 @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2013, Intel Corp. + * Copyright (C) 2000 - 2015, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -48,289 +48,13 @@ #define _COMPONENT ACPI_UTILITIES ACPI_MODULE_NAME("utstring") -/* - * Non-ANSI C library functions - strlwr, strupr, stricmp, and a 64-bit - * version of strtoul. - */ -#ifdef ACPI_ASL_COMPILER -/******************************************************************************* - * - * FUNCTION: acpi_ut_strlwr (strlwr) - * - * PARAMETERS: src_string - The source string to convert - * - * RETURN: None - * - * DESCRIPTION: Convert string to lowercase - * - * NOTE: This is not a POSIX function, so it appears here, not in utclib.c - * - ******************************************************************************/ -void acpi_ut_strlwr(char *src_string) -{ - char *string; - - ACPI_FUNCTION_ENTRY(); - - if (!src_string) { - return; - } - - /* Walk entire string, lowercasing the letters */ - - for (string = src_string; *string; string++) { - *string = (char)ACPI_TOLOWER(*string); - } - - return; -} - -/****************************************************************************** - * - * FUNCTION: acpi_ut_stricmp (stricmp) - * - * PARAMETERS: string1 - first string to compare - * string2 - second string to compare - * - * RETURN: int that signifies string relationship. Zero means strings - * are equal. - * - * DESCRIPTION: Implementation of the non-ANSI stricmp function (compare - * strings with no case sensitivity) - * - ******************************************************************************/ - -int acpi_ut_stricmp(char *string1, char *string2) -{ - int c1; - int c2; - - do { - c1 = tolower((int)*string1); - c2 = tolower((int)*string2); - - string1++; - string2++; - } - while ((c1 == c2) && (c1)); - - return (c1 - c2); -} -#endif - -/******************************************************************************* - * - * FUNCTION: acpi_ut_strupr (strupr) - * - * PARAMETERS: src_string - The source string to convert - * - * RETURN: None - * - * DESCRIPTION: Convert string to uppercase - * - * NOTE: This is not a POSIX function, so it appears here, not in utclib.c - * - ******************************************************************************/ - -void acpi_ut_strupr(char *src_string) -{ - char *string; - - ACPI_FUNCTION_ENTRY(); - - if (!src_string) { - return; - } - - /* Walk entire string, uppercasing the letters */ - - for (string = src_string; *string; string++) { - *string = (char)ACPI_TOUPPER(*string); - } - - return; -} - -/******************************************************************************* - * - * FUNCTION: acpi_ut_strtoul64 - * - * PARAMETERS: string - Null terminated string - * base - Radix of the string: 16 or ACPI_ANY_BASE; - * ACPI_ANY_BASE means 'in behalf of to_integer' - * ret_integer - Where the converted integer is returned - * - * RETURN: Status and Converted value - * - * DESCRIPTION: Convert a string into an unsigned value. Performs either a - * 32-bit or 64-bit conversion, depending on the current mode - * of the interpreter. - * NOTE: Does not support Octal strings, not needed. - * - ******************************************************************************/ - -acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer) -{ - u32 this_digit = 0; - u64 return_value = 0; - u64 quotient; - u64 dividend; - u32 to_integer_op = (base == ACPI_ANY_BASE); - u32 mode32 = (acpi_gbl_integer_byte_width == 4); - u8 valid_digits = 0; - u8 sign_of0x = 0; - u8 term = 0; - - ACPI_FUNCTION_TRACE_STR(ut_stroul64, string); - - switch (base) { - case ACPI_ANY_BASE: - case 16: - break; - - default: - /* Invalid Base */ - return_ACPI_STATUS(AE_BAD_PARAMETER); - } - - if (!string) { - goto error_exit; - } - - /* Skip over any white space in the buffer */ - - while ((*string) && (ACPI_IS_SPACE(*string) || *string == '\t')) { - string++; - } - - if (to_integer_op) { - /* - * Base equal to ACPI_ANY_BASE means 'ToInteger operation case'. - * We need to determine if it is decimal or hexadecimal. - */ - if ((*string == '0') && (ACPI_TOLOWER(*(string + 1)) == 'x')) { - sign_of0x = 1; - base = 16; - - /* Skip over the leading '0x' */ - string += 2; - } else { - base = 10; - } - } - - /* Any string left? Check that '0x' is not followed by white space. */ - - if (!(*string) || ACPI_IS_SPACE(*string) || *string == '\t') { - if (to_integer_op) { - goto error_exit; - } else { - goto all_done; - } - } - - /* - * Perform a 32-bit or 64-bit conversion, depending upon the current - * execution mode of the interpreter - */ - dividend = (mode32) ? ACPI_UINT32_MAX : ACPI_UINT64_MAX; - - /* Main loop: convert the string to a 32- or 64-bit integer */ - - while (*string) { - if (ACPI_IS_DIGIT(*string)) { - - /* Convert ASCII 0-9 to Decimal value */ - - this_digit = ((u8)*string) - '0'; - } else if (base == 10) { - - /* Digit is out of range; possible in to_integer case only */ - - term = 1; - } else { - this_digit = (u8)ACPI_TOUPPER(*string); - if (ACPI_IS_XDIGIT((char)this_digit)) { - - /* Convert ASCII Hex char to value */ - - this_digit = this_digit - 'A' + 10; - } else { - term = 1; - } - } - - if (term) { - if (to_integer_op) { - goto error_exit; - } else { - break; - } - } else if ((valid_digits == 0) && (this_digit == 0) - && !sign_of0x) { - - /* Skip zeros */ - string++; - continue; - } - - valid_digits++; - - if (sign_of0x - && ((valid_digits > 16) - || ((valid_digits > 8) && mode32))) { - /* - * This is to_integer operation case. - * No any restrictions for string-to-integer conversion, - * see ACPI spec. - */ - goto error_exit; - } - - /* Divide the digit into the correct position */ - - (void)acpi_ut_short_divide((dividend - (u64)this_digit), - base, "ient, NULL); - - if (return_value > quotient) { - if (to_integer_op) { - goto error_exit; - } else { - break; - } - } - - return_value *= base; - return_value += this_digit; - string++; - } - - /* All done, normal exit */ - - all_done: - - ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n", - ACPI_FORMAT_UINT64(return_value))); - - *ret_integer = return_value; - return_ACPI_STATUS(AE_OK); - - error_exit: - /* Base was set/validated above */ - - if (base == 10) { - return_ACPI_STATUS(AE_BAD_DECIMAL_CONSTANT); - } else { - return_ACPI_STATUS(AE_BAD_HEX_CONSTANT); - } -} - /******************************************************************************* * * FUNCTION: acpi_ut_print_string * * PARAMETERS: string - Null terminated ASCII string - * max_length - Maximum output length + * max_length - Maximum output length. Used to constrain the + * length of strings during debug output only. * * RETURN: None * @@ -338,8 +62,7 @@ * sequences. * ******************************************************************************/ - -void acpi_ut_print_string(char *string, u8 max_length) +void acpi_ut_print_string(char *string, u16 max_length) { u32 i; @@ -355,36 +78,44 @@ switch (string[i]) { case 0x07: + acpi_os_printf("\\a"); /* BELL */ break; case 0x08: + acpi_os_printf("\\b"); /* BACKSPACE */ break; case 0x0C: + acpi_os_printf("\\f"); /* FORMFEED */ break; case 0x0A: + acpi_os_printf("\\n"); /* LINEFEED */ break; case 0x0D: + acpi_os_printf("\\r"); /* CARRIAGE RETURN */ break; case 0x09: + acpi_os_printf("\\t"); /* HORIZONTAL TAB */ break; case 0x0B: + acpi_os_printf("\\v"); /* VERTICAL TAB */ break; case '\'': /* Single Quote */ case '\"': /* Double Quote */ case '\\': /* Backslash */ + acpi_os_printf("\\%c", (int)string[i]); break; @@ -392,7 +123,7 @@ /* Check for printable character or hex escape */ - if (ACPI_IS_PRINT(string[i])) { + if (isprint((int)string[i])) { /* This is a normal character */ acpi_os_printf("%c", (int)string[i]); @@ -451,7 +182,8 @@ * * FUNCTION: acpi_ut_valid_acpi_name * - * PARAMETERS: name - The name to be examined + * PARAMETERS: name - The name to be examined. Does not have to + * be NULL terminated string. * * RETURN: TRUE if the name is valid, FALSE otherwise * @@ -462,15 +194,14 @@ * ******************************************************************************/ -u8 acpi_ut_valid_acpi_name(u32 name) +u8 acpi_ut_valid_acpi_name(char *name) { u32 i; ACPI_FUNCTION_ENTRY(); for (i = 0; i < ACPI_NAME_SIZE; i++) { - if (!acpi_ut_valid_acpi_char - ((ACPI_CAST_PTR(char, &name))[i], i)) { + if (!acpi_ut_valid_acpi_char(name[i], i)) { return (FALSE); } }