--- zzzz-none-000/linux-3.10.107/drivers/ata/Kconfig	2017-06-27 09:49:32.000000000 +0000
+++ scorpion-7490-727/linux-3.10.107/drivers/ata/Kconfig	2021-02-04 17:41:59.000000000 +0000
@@ -11,13 +11,14 @@
 	  to update the PATA_PLATFORM entry.
 
 menuconfig ATA
-	tristate "Serial ATA and Parallel ATA drivers"
+	tristate "Serial ATA and Parallel ATA drivers (libata)"
 	depends on HAS_IOMEM
 	depends on BLOCK
 	depends on !(M32R || M68K || S390) || BROKEN
 	select SCSI
+	select GLOB
 	---help---
-	  If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
+	  If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
 	  any other ATA device under Linux, say Y and make sure that you know
 	  the name of your ATA host adapter (the card inside your computer
 	  that "speaks" the ATA protocol, also called ATA controller),
@@ -45,9 +46,25 @@
 
 	  If unsure, say Y.
 
+config ARCH_WANT_LIBATA_LEDS
+	bool
+
+config ATA_LEDS
+	bool "support ATA port LED triggers"
+	depends on ARCH_WANT_LIBATA_LEDS
+	select NEW_LEDS
+	select LEDS_CLASS
+	select LEDS_TRIGGERS
+	default y
+	help
+	  This option adds a LED trigger for each registered ATA port.
+	  It is used to drive disk activity leds connected via GPIO.
+
+	  If unsure, say N.
+
 config ATA_ACPI
 	bool "ATA ACPI Support"
-	depends on ACPI && PCI
+	depends on ACPI
 	default y
 	help
 	  This option adds support for ATA-related ACPI objects.
@@ -60,7 +77,7 @@
 
 config SATA_ZPODD
 	bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
-	depends on ATA_ACPI
+	depends on ATA_ACPI && PM
 	default n
 	help
 	  This option adds support for SATA Zero Power Optical Disc
@@ -97,6 +114,100 @@
 
 	  If unsure, say N.
 
+config AHCI_BRCMSTB
+	tristate "Broadcom STB AHCI SATA support"
+	depends on ARCH_BRCMSTB
+	help
+	  This option enables support for the AHCI SATA3 controller found on
+	  STB SoC's.
+
+	  If unsure, say N.
+
+config AHCI_DA850
+	tristate "DaVinci DA850 AHCI SATA support"
+	depends on ARCH_DAVINCI_DA850
+	help
+	  This option enables support for the DaVinci DA850 SoC's
+	  onboard AHCI SATA.
+
+	  If unsure, say N.
+
+config AHCI_ST
+	tristate "ST AHCI SATA support"
+	depends on ARCH_STI
+	help
+	  This option enables support for ST AHCI SATA controller.
+
+	  If unsure, say N.
+
+config AHCI_IMX
+	tristate "Freescale i.MX AHCI SATA support"
+	depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
+	help
+	  This option enables support for the Freescale i.MX SoC's
+	  onboard AHCI SATA.
+
+	  If unsure, say N.
+
+config AHCI_IPQ
+	tristate "Qualcomm Atheros IPQ806X AHCI SATA support"
+	help
+	  This option enables support for the IPQ806X SoC's
+	  onboard AHCI SATA.
+
+	  If unsure, say N.
+
+config AHCI_CEVA
+	tristate "CEVA AHCI SATA support"
+	depends on OF
+	help
+	  This option enables support for the CEVA AHCI SATA.
+	  It can be found on the Xilinx Zynq UltraScale+ MPSoC.
+
+	  If unsure, say N.
+
+config AHCI_MVEBU
+	tristate "Marvell EBU AHCI SATA support"
+	depends on ARCH_MVEBU
+	help
+	  This option enables support for the Marvebu EBU SoC's
+	  onboard AHCI SATA.
+
+	  If unsure, say N.
+
+config AHCI_SUNXI
+	tristate "Allwinner sunxi AHCI SATA support"
+	depends on ARCH_SUNXI
+	help
+	  This option enables support for the Allwinner sunxi SoC's
+	  onboard AHCI SATA.
+
+	  If unsure, say N.
+
+config AHCI_TEGRA
+	tristate "NVIDIA Tegra124 AHCI SATA support"
+	depends on ARCH_TEGRA
+	help
+	  This option enables support for the NVIDIA Tegra124 SoC's
+	  onboard AHCI SATA.
+
+	  If unsure, say N.
+
+config AHCI_XGENE
+	tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
+	depends on PHY_XGENE
+	help
+	 This option enables support for APM X-Gene SoC SATA host controller.
+
+config AHCI_QORIQ
+	tristate "Freescale QorIQ AHCI SATA support"
+	depends on OF
+	help
+	  This option enables support for the Freescale QorIQ AHCI SoC's
+	  onboard AHCI SATA.
+
+	  If unsure, say N.
+
 config SATA_FSL
 	tristate "Freescale 3.0Gbps SATA support"
 	depends on FSL_SOC
@@ -160,7 +271,7 @@
 
 config PATA_OCTEON_CF
 	tristate "OCTEON Boot Bus Compact Flash support"
-	depends on CPU_CAVIUM_OCTEON
+	depends on CAVIUM_OCTEON_SOC
 	help
 	  This option enables a polled compact flash driver for use with
 	  compact flash cards attached to the OCTEON boot bus.
@@ -210,6 +321,7 @@
 config SATA_DWC
 	tristate "DesignWare Cores SATA support"
 	depends on 460EX
+	select DW_DMAC
 	help
 	  This option enables support for the on-chip SATA controller of the
 	  AppliedMicro processor 460EX.
@@ -230,6 +342,7 @@
 
 config SATA_HIGHBANK
 	tristate "Calxeda Highbank SATA support"
+	depends on ARCH_HIGHBANK || COMPILE_TEST
 	help
 	  This option enables support for the Calxeda Highbank SoC's
 	  onboard SATA.
@@ -238,6 +351,9 @@
 
 config SATA_MV
 	tristate "Marvell SATA support"
+	depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
+		   ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
+	select GENERIC_PHY
 	help
 	  This option enables support for the Marvell Serial ATA family.
 	  Currently supports 88SX[56]0[48][01] PCI(-X) chips,
@@ -263,7 +379,7 @@
 
 config SATA_RCAR
 	tristate "Renesas R-Car SATA support"
-	depends on ARCH_SHMOBILE && ARCH_R8A7779
+	depends on ARCH_SHMOBILE || COMPILE_TEST
 	help
 	  This option enables support for Renesas R-Car Serial ATA.
 
@@ -343,6 +459,7 @@
 
 config PATA_ARASAN_CF
 	tristate "ARASAN CompactFlash PATA Controller Support"
+	depends on ARCH_SPEAR13XX || COMPILE_TEST
 	depends on DMADEVICES
 	select DMA_ENGINE
 	help
@@ -394,7 +511,7 @@
 
 config PATA_CS5520
 	tristate "CS5510/5520 PATA support"
-	depends on PCI
+	depends on PCI && (X86_32 || COMPILE_TEST)
 	help
 	  This option enables support for the Cyrix 5510/5520
 	  companion chip used with the MediaGX/Geode processor family.
@@ -403,7 +520,7 @@
 
 config PATA_CS5530
 	tristate "CS5530 PATA support"
-	depends on PCI
+	depends on PCI && (X86_32 || COMPILE_TEST)
 	help
 	  This option enables support for the Cyrix/NatSemi/AMD CS5530
 	  companion chip used with the MediaGX/Geode processor family.
@@ -412,7 +529,7 @@
 
 config PATA_CS5535
 	tristate "CS5535 PATA support (Experimental)"
-	depends on PCI && X86 && !X86_64
+	depends on PCI && X86_32
 	help
 	  This option enables support for the NatSemi/AMD CS5535
 	  companion chip used with the Geode processor family.
@@ -421,7 +538,7 @@
 
 config PATA_CS5536
 	tristate "CS5536 PATA support"
-	depends on PCI
+	depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
 	help
 	  This option enables support for the AMD CS5536
 	  companion chip used with the Geode LX processor family.
@@ -657,22 +774,13 @@
 
 config PATA_SC1200
 	tristate "SC1200 PATA support"
-	depends on PCI
+	depends on PCI && (X86_32 || COMPILE_TEST)
 	help
 	  This option enables support for the NatSemi/AMD SC1200 SoC
 	  companion chip used with the Geode processor family.
 
 	  If unsure, say N.
 
-config PATA_SCC
-	tristate "Toshiba's Cell Reference Set IDE support"
-	depends on PCI && PPC_CELLEB
-	help
-	  This option enables support for the built-in IDE controller on
-	  Toshiba Cell Reference Board.
-
-	  If unsure, say N.
-
 config PATA_SCH
 	tristate "Intel SCH PATA support"
 	depends on PCI
@@ -769,7 +877,7 @@
 
 config PATA_AT91
 	tristate "PATA support for AT91SAM9260"
-	depends on ARM && ARCH_AT91
+	depends on ARM && SOC_AT91SAM9
 	help
 	  This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.