--- zzzz-none-000/linux-3.10.107/drivers/ata/ahci.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/ata/ahci.c 2021-02-04 17:41:59.000000000 +0000 @@ -35,7 +35,6 @@ #include #include #include -#include #include #include #include @@ -43,6 +42,7 @@ #include #include #include +#include #include #include #include @@ -53,6 +53,7 @@ enum { AHCI_PCI_BAR_STA2X11 = 0, + AHCI_PCI_BAR_CAVIUM = 0, AHCI_PCI_BAR_ENMOTUS = 2, AHCI_PCI_BAR_STANDARD = 5, }; @@ -67,6 +68,7 @@ board_ahci_yes_fbs, /* board IDs for specific chipsets in alphabetical order */ + board_ahci_avn, board_ahci_mcp65, board_ahci_mcp77, board_ahci_mcp89, @@ -85,6 +87,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); +static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static void ahci_mcp89_apple_enable(struct pci_dev *pdev); +static bool is_mcp89_apple(struct pci_dev *pdev); static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); #ifdef CONFIG_PM @@ -106,6 +112,11 @@ .hardreset = ahci_p5wdh_hardreset, }; +static struct ata_port_operations ahci_avn_ops = { + .inherits = &ahci_ops, + .hardreset = ahci_avn_hardreset, +}; + static const struct ata_port_info ahci_port_info[] = { /* by features */ [board_ahci] = { @@ -150,6 +161,12 @@ .port_ops = &ahci_ops, }, /* by chipsets */ + [board_ahci_avn] = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_avn_ops, + }, [board_ahci_mcp65] = { AHCI_HFLAGS (AHCI_HFLAG_NO_FPDMA_AA | AHCI_HFLAG_NO_PMP | AHCI_HFLAG_YES_NCQ), @@ -309,14 +326,14 @@ { PCI_VDEVICE(INTEL, 0x1f27), board_ahci }, /* Avoton RAID */ { PCI_VDEVICE(INTEL, 0x1f2e), board_ahci }, /* Avoton RAID */ { PCI_VDEVICE(INTEL, 0x1f2f), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f32), board_ahci }, /* Avoton AHCI */ - { PCI_VDEVICE(INTEL, 0x1f33), board_ahci }, /* Avoton AHCI */ - { PCI_VDEVICE(INTEL, 0x1f34), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f35), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f36), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f37), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f3e), board_ahci }, /* Avoton RAID */ - { PCI_VDEVICE(INTEL, 0x1f3f), board_ahci }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f32), board_ahci_avn }, /* Avoton AHCI */ + { PCI_VDEVICE(INTEL, 0x1f33), board_ahci_avn }, /* Avoton AHCI */ + { PCI_VDEVICE(INTEL, 0x1f34), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f35), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f36), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f37), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f3e), board_ahci_avn }, /* Avoton RAID */ + { PCI_VDEVICE(INTEL, 0x1f3f), board_ahci_avn }, /* Avoton RAID */ { PCI_VDEVICE(INTEL, 0x2823), board_ahci }, /* Wellsburg RAID */ { PCI_VDEVICE(INTEL, 0x2827), board_ahci }, /* Wellsburg RAID */ { PCI_VDEVICE(INTEL, 0x8d02), board_ahci }, /* Wellsburg AHCI */ @@ -343,11 +360,28 @@ { PCI_VDEVICE(INTEL, 0x9d03), board_ahci }, /* Sunrise Point-LP AHCI */ { PCI_VDEVICE(INTEL, 0x9d05), board_ahci }, /* Sunrise Point-LP RAID */ { PCI_VDEVICE(INTEL, 0x9d07), board_ahci }, /* Sunrise Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0xa102), board_ahci }, /* Sunrise Point-H AHCI */ { PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H AHCI */ - { PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H RAID */ { PCI_VDEVICE(INTEL, 0xa105), board_ahci }, /* Sunrise Point-H RAID */ + { PCI_VDEVICE(INTEL, 0xa106), board_ahci }, /* Sunrise Point-H RAID */ { PCI_VDEVICE(INTEL, 0xa107), board_ahci }, /* Sunrise Point-H RAID */ { PCI_VDEVICE(INTEL, 0xa10f), board_ahci }, /* Sunrise Point-H RAID */ + { PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0x2823), board_ahci }, /* Lewisburg AHCI*/ + { PCI_VDEVICE(INTEL, 0x2826), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0x2827), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0xa182), board_ahci }, /* Lewisburg AHCI*/ + { PCI_VDEVICE(INTEL, 0xa184), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0xa186), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0xa18e), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0xa1d2), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0xa1d6), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0xa202), board_ahci }, /* Lewisburg AHCI*/ + { PCI_VDEVICE(INTEL, 0xa204), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0xa206), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0xa20e), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0xa252), board_ahci }, /* Lewisburg RAID*/ + { PCI_VDEVICE(INTEL, 0xa256), board_ahci }, /* Lewisburg RAID*/ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, @@ -355,6 +389,7 @@ /* JMicron 362B and 362C have an AHCI function with IDE class code */ { PCI_VDEVICE(JMICRON, 0x2362), board_ahci_ign_iferr }, { PCI_VDEVICE(JMICRON, 0x236f), board_ahci_ign_iferr }, + /* May need to update quirk_jmicron_async_suspend() for additions */ /* ATI */ { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */ @@ -492,6 +527,8 @@ .driver_data = board_ahci_yes_fbs }, /* 88se9172 on some Gigabyte */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0), .driver_data = board_ahci_yes_fbs }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a2), /* 88se91a2 */ + .driver_data = board_ahci_yes_fbs }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a3), .driver_data = board_ahci_yes_fbs }, { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230), @@ -550,12 +587,9 @@ static void ahci_pci_save_initial_config(struct pci_dev *pdev, struct ahci_host_priv *hpriv) { - unsigned int force_port_map = 0; - unsigned int mask_port_map = 0; - if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) { dev_info(&pdev->dev, "JMB361 has only one port\n"); - force_port_map = 1; + hpriv->force_port_map = 1; } /* @@ -565,15 +599,14 @@ */ if (hpriv->flags & AHCI_HFLAG_MV_PATA) { if (pdev->device == 0x6121) - mask_port_map = 0x3; + hpriv->mask_port_map = 0x3; else - mask_port_map = 0xf; + hpriv->mask_port_map = 0xf; dev_info(&pdev->dev, "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n"); } - ahci_save_initial_config(&pdev->dev, hpriv, force_port_map, - mask_port_map); + ahci_save_initial_config(&pdev->dev, hpriv); } static int ahci_pci_reset_controller(struct ata_host *host) @@ -628,6 +661,7 @@ unsigned long deadline) { struct ata_port *ap = link->ap; + struct ahci_host_priv *hpriv = ap->host->private_data; bool online; int rc; @@ -638,7 +672,7 @@ rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context), deadline, &online, NULL); - ahci_start_engine(ap); + hpriv->start_engine(ap); DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); @@ -653,6 +687,7 @@ { struct ata_port *ap = link->ap; struct ahci_port_priv *pp = ap->private_data; + struct ahci_host_priv *hpriv = ap->host->private_data; u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; struct ata_taskfile tf; bool online; @@ -662,13 +697,13 @@ /* clear D2H reception area to properly wait for D2H FIS */ ata_tf_init(link->device, &tf); - tf.command = 0x80; + tf.command = ATA_BUSY; ata_tf_to_fis(&tf, 0, 0, d2h_fis); rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context), deadline, &online, NULL); - ahci_start_engine(ap); + hpriv->start_engine(ap); /* The pseudo configuration device on SIMG4726 attached to * ASUS P5W-DH Deluxe doesn't send signature FIS after @@ -692,10 +727,83 @@ return rc; } +/* + * ahci_avn_hardreset - attempt more aggressive recovery of Avoton ports. + * + * It has been observed with some SSDs that the timing of events in the + * link synchronization phase can leave the port in a state that can not + * be recovered by a SATA-hard-reset alone. The failing signature is + * SStatus.DET stuck at 1 ("Device presence detected but Phy + * communication not established"). It was found that unloading and + * reloading the driver when this problem occurs allows the drive + * connection to be recovered (DET advanced to 0x3). The critical + * component of reloading the driver is that the port state machines are + * reset by bouncing "port enable" in the AHCI PCS configuration + * register. So, reproduce that effect by bouncing a port whenever we + * see DET==1 after a reset. + */ +static int ahci_avn_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_host_priv *hpriv = ap->host->private_data; + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + unsigned long tmo = deadline - jiffies; + struct ata_taskfile tf; + bool online; + int rc, i; + + DPRINTK("ENTER\n"); + + ahci_stop_engine(ap); + + for (i = 0; i < 2; i++) { + u16 val; + u32 sstatus; + int port = ap->port_no; + struct ata_host *host = ap->host; + struct pci_dev *pdev = to_pci_dev(host->dev); + + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); + tf.command = ATA_BUSY; + ata_tf_to_fis(&tf, 0, 0, d2h_fis); + + rc = sata_link_hardreset(link, timing, deadline, &online, + ahci_check_ready); + + if (sata_scr_read(link, SCR_STATUS, &sstatus) != 0 || + (sstatus & 0xf) != 1) + break; + + ata_link_printk(link, KERN_INFO, "avn bounce port%d\n", + port); + + pci_read_config_word(pdev, 0x92, &val); + val &= ~(1 << port); + pci_write_config_word(pdev, 0x92, val); + ata_msleep(ap, 1000); + val |= 1 << port; + pci_write_config_word(pdev, 0x92, val); + deadline += tmo; + } + + hpriv->start_engine(ap); + + if (online) + *class = ahci_dev_classify(ap); + + DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); + return rc; +} + + #ifdef CONFIG_PM static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) { - struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct ata_host *host = pci_get_drvdata(pdev); struct ahci_host_priv *hpriv = host->private_data; void __iomem *mmio = hpriv->mmio; u32 ctl; @@ -723,13 +831,17 @@ static int ahci_pci_device_resume(struct pci_dev *pdev) { - struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct ata_host *host = pci_get_drvdata(pdev); int rc; rc = ata_pci_device_do_resume(pdev); if (rc) return rc; + /* Apple BIOS helpfully mangles the registers on resume */ + if (is_mcp89_apple(pdev)) + ahci_mcp89_apple_enable(pdev); + if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { rc = ahci_pci_reset_controller(host); if (rc) @@ -756,10 +868,10 @@ return 0; if (using_dac && - !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { - rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); + !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) { + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); if (rc) { - rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (rc) { dev_err(&pdev->dev, "64-bit DMA enable failed\n"); @@ -767,12 +879,12 @@ } } } else { - rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); if (rc) { dev_err(&pdev->dev, "32-bit DMA enable failed\n"); return rc; } - rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (rc) { dev_err(&pdev->dev, "32-bit consistent DMA enable failed\n"); @@ -821,7 +933,7 @@ */ static void ahci_p5wdh_workaround(struct ata_host *host) { - static struct dmi_system_id sysids[] = { + static const struct dmi_system_id sysids[] = { { .ident = "P5W DH Deluxe", .matches = { @@ -846,6 +958,48 @@ } } +/* + * Macbook7,1 firmware forcibly disables MCP89 AHCI and changes PCI ID when + * booting in BIOS compatibility mode. We restore the registers but not ID. + */ +static void ahci_mcp89_apple_enable(struct pci_dev *pdev) +{ + u32 val; + + printk(KERN_INFO "ahci: enabling MCP89 AHCI mode\n"); + + pci_read_config_dword(pdev, 0xf8, &val); + val |= 1 << 0x1b; + /* the following changes the device ID, but appears not to affect function */ + /* val = (val & ~0xf0000000) | 0x80000000; */ + pci_write_config_dword(pdev, 0xf8, val); + + pci_read_config_dword(pdev, 0x54c, &val); + val |= 1 << 0xc; + pci_write_config_dword(pdev, 0x54c, val); + + pci_read_config_dword(pdev, 0x4a4, &val); + val &= 0xff; + val |= 0x01060100; + pci_write_config_dword(pdev, 0x4a4, val); + + pci_read_config_dword(pdev, 0x54c, &val); + val &= ~(1 << 0xc); + pci_write_config_dword(pdev, 0x54c, val); + + pci_read_config_dword(pdev, 0xf8, &val); + val &= ~(1 << 0x1b); + pci_write_config_dword(pdev, 0xf8, val); +} + +static bool is_mcp89_apple(struct pci_dev *pdev) +{ + return pdev->vendor == PCI_VENDOR_ID_NVIDIA && + pdev->device == PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA && + pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE && + pdev->subsystem_device == 0xcb89; +} + /* only some SB600 ahci controllers can do 64bit DMA */ static bool ahci_sb600_enable_64bit(struct pci_dev *pdev) { @@ -1118,6 +1272,17 @@ return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff); } +static bool ahci_broken_devslp(struct pci_dev *pdev) +{ + /* device with broken DEVSLP but still showing SDS capability */ + static const struct pci_device_id ids[] = { + { PCI_VDEVICE(INTEL, 0x0f23)}, /* Valleyview SoC */ + {} + }; + + return pci_match_id(ids, pdev); +} + #ifdef CONFIG_ATA_ACPI static void ahci_gtf_filter_workaround(struct ata_host *host) { @@ -1166,84 +1331,122 @@ {} #endif -int ahci_init_interrupts(struct pci_dev *pdev, struct ahci_host_priv *hpriv) +/* + * ahci_init_msix() only implements single MSI-X support, not multiple + * MSI-X per-port interrupts. This is needed for host controllers that only + * have MSI-X support implemented, but no MSI or intx. + */ +static int ahci_init_msix(struct pci_dev *pdev, unsigned int n_ports, + struct ahci_host_priv *hpriv) { - int rc; - unsigned int maxvec; + int rc, nvec; + struct msix_entry entry = {}; - if (!(hpriv->flags & AHCI_HFLAG_NO_MSI)) { - rc = pci_enable_msi_block_auto(pdev, &maxvec); - if (rc > 0) { - if ((rc == maxvec) || (rc == 1)) - return rc; - /* - * Assume that advantage of multipe MSIs is negated, - * so fallback to single MSI mode to save resources - */ - pci_disable_msi(pdev); - if (!pci_enable_msi(pdev)) - return 1; - } + /* Do not init MSI-X if MSI is disabled for the device */ + if (hpriv->flags & AHCI_HFLAG_NO_MSI) + return -ENODEV; + + nvec = pci_msix_vec_count(pdev); + if (nvec < 0) + return nvec; + + if (!nvec) { + rc = -ENODEV; + goto fail; } - pci_intx(pdev, 1); - return 0; + /* + * There can be more than one vector (e.g. for error detection or + * hdd hotplug). Only the first vector (entry.entry = 0) is used. + */ + rc = pci_enable_msix_exact(pdev, &entry, 1); + if (rc < 0) + goto fail; + + hpriv->irq = entry.vector; + + return 1; +fail: + dev_err(&pdev->dev, + "failed to enable MSI-X with error %d, # of vectors: %d\n", + rc, nvec); + + return rc; } -/** - * ahci_host_activate - start AHCI host, request IRQs and register it - * @host: target ATA host - * @irq: base IRQ number to request - * @n_msis: number of MSIs allocated for this host - * @irq_handler: irq_handler used when requesting IRQs - * @irq_flags: irq_flags used when requesting IRQs - * - * Similar to ata_host_activate, but requests IRQs according to AHCI-1.1 - * when multiple MSIs were allocated. That is one MSI per port, starting - * from @irq. - * - * LOCKING: - * Inherited from calling layer (may sleep). - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int ahci_host_activate(struct ata_host *host, int irq, unsigned int n_msis) +static int ahci_init_msi(struct pci_dev *pdev, unsigned int n_ports, + struct ahci_host_priv *hpriv) { - int i, rc; + int rc, nvec; - /* Sharing Last Message among several ports is not supported */ - if (n_msis < host->n_ports) - return -EINVAL; + if (hpriv->flags & AHCI_HFLAG_NO_MSI) + return -ENODEV; - rc = ata_host_start(host); - if (rc) + nvec = pci_msi_vec_count(pdev); + if (nvec < 0) + return nvec; + + /* + * If number of MSIs is less than number of ports then Sharing Last + * Message mode could be enforced. In this case assume that advantage + * of multipe MSIs is negated and use single MSI mode instead. + */ + if (nvec < n_ports) + goto single_msi; + + rc = pci_enable_msi_exact(pdev, nvec); + if (rc == -ENOSPC) + goto single_msi; + if (rc < 0) return rc; - for (i = 0; i < host->n_ports; i++) { - rc = devm_request_threaded_irq(host->dev, - irq + i, ahci_hw_interrupt, ahci_thread_fn, IRQF_SHARED, - dev_driver_string(host->dev), host->ports[i]); - if (rc) - goto out_free_irqs; + /* fallback to single MSI mode if the controller enforced MRSM mode */ + if (readl(hpriv->mmio + HOST_CTL) & HOST_MRSM) { + pci_disable_msi(pdev); + printk(KERN_INFO "ahci: MRSM is on, fallback to single MSI\n"); + goto single_msi; } - for (i = 0; i < host->n_ports; i++) - ata_port_desc(host->ports[i], "irq %d", irq + i); + if (nvec > 1) + hpriv->flags |= AHCI_HFLAG_MULTI_MSI; - rc = ata_host_register(host, &ahci_sht); - if (rc) - goto out_free_all_irqs; + goto out; - return 0; +single_msi: + nvec = 1; -out_free_all_irqs: - i = host->n_ports; -out_free_irqs: - for (i--; i >= 0; i--) - devm_free_irq(host->dev, irq + i, host->ports[i]); + rc = pci_enable_msi(pdev); + if (rc < 0) + return rc; +out: + hpriv->irq = pdev->irq; - return rc; + return nvec; +} + +static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports, + struct ahci_host_priv *hpriv) +{ + int nvec; + + nvec = ahci_init_msi(pdev, n_ports, hpriv); + if (nvec >= 0) + return nvec; + + /* + * Currently, MSI-X support only implements single IRQ mode and + * exists for controllers which can't do other types of IRQ. Only + * set it up if MSI fails. + */ + nvec = ahci_init_msix(pdev, n_ports, hpriv); + if (nvec >= 0) + return nvec; + + /* lagacy intx interrupts */ + pci_intx(pdev, 1); + hpriv->irq = pdev->irq; + + return 0; } static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) @@ -1254,7 +1457,7 @@ struct device *dev = &pdev->dev; struct ahci_host_priv *hpriv; struct ata_host *host; - int n_ports, n_msis, i, rc; + int n_ports, i, rc; int ahci_pci_bar = AHCI_PCI_BAR_STANDARD; VPRINTK("ENTER\n"); @@ -1269,15 +1472,9 @@ if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable) return -ENODEV; - /* - * For some reason, MCP89 on MacBook 7,1 doesn't work with - * ahci, use ata_generic instead. - */ - if (pdev->vendor == PCI_VENDOR_ID_NVIDIA && - pdev->device == PCI_DEVICE_ID_NVIDIA_NFORCE_MCP89_SATA && - pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE && - pdev->subsystem_device == 0xcb89) - return -ENODEV; + /* Apple BIOS on MCP89 prevents us using AHCI */ + if (is_mcp89_apple(pdev)) + ahci_mcp89_apple_enable(pdev); /* Promise's PDC42819 is a SAS/SATA controller that has an AHCI mode. * At the moment, we can only use the AHCI mode. Let the users know @@ -1287,26 +1484,19 @@ dev_info(&pdev->dev, "PDC42819 can only drive SATA devices with this driver\n"); - /* Both Connext and Enmotus devices use non-standard BARs */ + /* Some devices use non-standard BARs */ if (pdev->vendor == PCI_VENDOR_ID_STMICRO && pdev->device == 0xCC06) ahci_pci_bar = AHCI_PCI_BAR_STA2X11; else if (pdev->vendor == 0x1c44 && pdev->device == 0x8000) ahci_pci_bar = AHCI_PCI_BAR_ENMOTUS; + else if (pdev->vendor == 0x177d && pdev->device == 0xa01c) + ahci_pci_bar = AHCI_PCI_BAR_CAVIUM; /* acquire resources */ rc = pcim_enable_device(pdev); if (rc) return rc; - /* AHCI controllers often implement SFF compatible interface. - * Grab all PCI BARs just in case. - */ - rc = pcim_iomap_regions_request_all(pdev, 1 << ahci_pci_bar, DRV_NAME); - if (rc == -EBUSY) - pcim_pin_device(pdev); - if (rc) - return rc; - if (pdev->vendor == PCI_VENDOR_ID_INTEL && (pdev->device == 0x2652 || pdev->device == 0x2653)) { u8 map; @@ -1323,6 +1513,15 @@ } } + /* AHCI controllers often implement SFF compatible interface. + * Grab all PCI BARs just in case. + */ + rc = pcim_iomap_regions_request_all(pdev, 1 << ahci_pci_bar, DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(pdev); + if (rc) + return rc; + hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); if (!hpriv) return -ENOMEM; @@ -1343,9 +1542,9 @@ hpriv->mmio = pcim_iomap_table(pdev)[ahci_pci_bar]; - n_msis = ahci_init_interrupts(pdev, hpriv); - if (n_msis > 1) - hpriv->flags |= AHCI_HFLAG_MULTI_MSI; + /* must set flag prior to save config in order to take effect */ + if (ahci_broken_devslp(pdev)) + hpriv->flags |= AHCI_HFLAG_NO_DEVSLP; /* save initial config */ ahci_pci_save_initial_config(pdev, hpriv); @@ -1361,6 +1560,14 @@ */ if (!(hpriv->flags & AHCI_HFLAG_NO_FPDMA_AA)) pi.flags |= ATA_FLAG_FPDMA_AA; + + /* + * All AHCI controllers should be forward-compatible + * with the new auxiliary field. This code should be + * conditionalized if any buggy AHCI controllers are + * encountered. + */ + pi.flags |= ATA_FLAG_FPDMA_AUX; } if (hpriv->cap & HOST_CAP_PMP) @@ -1398,10 +1605,12 @@ return -ENOMEM; host->private_data = hpriv; + ahci_init_interrupts(pdev, n_ports, hpriv); + if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) host->flags |= ATA_HOST_PARALLEL_SCAN; else - printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n"); + dev_info(&pdev->dev, "SSS flag set, parallel bus scan disabled\n"); if (pi.flags & ATA_FLAG_EM) ahci_reset_em(host); @@ -1443,11 +1652,7 @@ pci_set_master(pdev); - if (hpriv->flags & AHCI_HFLAG_MULTI_MSI) - return ahci_host_activate(host, pdev->irq, n_msis); - - return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED, - &ahci_sht); + return ahci_host_activate(host, &ahci_sht); } module_pci_driver(ahci_pci_driver);