--- zzzz-none-000/linux-3.10.107/drivers/bcma/driver_chipcommon_pmu.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/bcma/driver_chipcommon_pmu.c 2021-02-04 17:41:59.000000000 +0000 @@ -56,6 +56,109 @@ } EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset); +static u32 bcma_pmu_xtalfreq(struct bcma_drv_cc *cc) +{ + u32 ilp_ctl, alp_hz; + + if (!(bcma_cc_read32(cc, BCMA_CC_PMU_STAT) & + BCMA_CC_PMU_STAT_EXT_LPO_AVAIL)) + return 0; + + bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, + BIT(BCMA_CC_PMU_XTAL_FREQ_MEASURE_SHIFT)); + usleep_range(1000, 2000); + + ilp_ctl = bcma_cc_read32(cc, BCMA_CC_PMU_XTAL_FREQ); + ilp_ctl &= BCMA_CC_PMU_XTAL_FREQ_ILPCTL_MASK; + + bcma_cc_write32(cc, BCMA_CC_PMU_XTAL_FREQ, 0); + + alp_hz = ilp_ctl * 32768 / 4; + return (alp_hz + 50000) / 100000 * 100; +} + +static void bcma_pmu2_pll_init0(struct bcma_drv_cc *cc, u32 xtalfreq) +{ + struct bcma_bus *bus = cc->core->bus; + u32 freq_tgt_target = 0, freq_tgt_current; + u32 pll0, mask; + + switch (bus->chipinfo.id) { + case BCMA_CHIP_ID_BCM43142: + /* pmu2_xtaltab0_adfll_485 */ + switch (xtalfreq) { + case 12000: + freq_tgt_target = 0x50D52; + break; + case 20000: + freq_tgt_target = 0x307FE; + break; + case 26000: + freq_tgt_target = 0x254EA; + break; + case 37400: + freq_tgt_target = 0x19EF8; + break; + case 52000: + freq_tgt_target = 0x12A75; + break; + } + break; + } + + if (!freq_tgt_target) { + bcma_err(bus, "Unknown TGT frequency for xtalfreq %d\n", + xtalfreq); + return; + } + + pll0 = bcma_chipco_pll_read(cc, BCMA_CC_PMU15_PLL_PLLCTL0); + freq_tgt_current = (pll0 & BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK) >> + BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT; + + if (freq_tgt_current == freq_tgt_target) { + bcma_debug(bus, "Target TGT frequency already set\n"); + return; + } + + /* Turn off PLL */ + switch (bus->chipinfo.id) { + case BCMA_CHIP_ID_BCM43142: + mask = (u32)~(BCMA_RES_4314_HT_AVAIL | + BCMA_RES_4314_MACPHY_CLK_AVAIL); + + bcma_cc_mask32(cc, BCMA_CC_PMU_MINRES_MSK, mask); + bcma_cc_mask32(cc, BCMA_CC_PMU_MAXRES_MSK, mask); + bcma_wait_value(cc->core, BCMA_CLKCTLST, + BCMA_CLKCTLST_HAVEHT, 0, 20000); + break; + } + + pll0 &= ~BCMA_CC_PMU15_PLL_PC0_FREQTGT_MASK; + pll0 |= freq_tgt_target << BCMA_CC_PMU15_PLL_PC0_FREQTGT_SHIFT; + bcma_chipco_pll_write(cc, BCMA_CC_PMU15_PLL_PLLCTL0, pll0); + + /* Flush */ + if (cc->pmu.rev >= 2) + bcma_cc_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD); + + /* TODO: Do we need to update OTP? */ +} + +static void bcma_pmu_pll_init(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; + u32 xtalfreq = bcma_pmu_xtalfreq(cc); + + switch (bus->chipinfo.id) { + case BCMA_CHIP_ID_BCM43142: + if (xtalfreq == 0) + xtalfreq = 20000; + bcma_pmu2_pll_init0(cc, xtalfreq); + break; + } +} + static void bcma_pmu_resources_init(struct bcma_drv_cc *cc) { struct bcma_bus *bus = cc->core->bus; @@ -66,6 +169,25 @@ min_msk = 0x200D; max_msk = 0xFFFF; break; + case BCMA_CHIP_ID_BCM43142: + min_msk = BCMA_RES_4314_LPLDO_PU | + BCMA_RES_4314_PMU_SLEEP_DIS | + BCMA_RES_4314_PMU_BG_PU | + BCMA_RES_4314_CBUCK_LPOM_PU | + BCMA_RES_4314_CBUCK_PFM_PU | + BCMA_RES_4314_CLDO_PU | + BCMA_RES_4314_LPLDO2_LVM | + BCMA_RES_4314_WL_PMU_PU | + BCMA_RES_4314_LDO3P3_PU | + BCMA_RES_4314_OTP_PU | + BCMA_RES_4314_WL_PWRSW_PU | + BCMA_RES_4314_LQ_AVAIL | + BCMA_RES_4314_LOGIC_RET | + BCMA_RES_4314_MEM_SLEEP | + BCMA_RES_4314_MACPHY_RET | + BCMA_RES_4314_WL_CORE_READY; + max_msk = 0x3FFFFFFF; + break; default: bcma_debug(bus, "PMU resource config unknown or not needed for device 0x%04X\n", bus->chipinfo.id); @@ -165,6 +287,7 @@ bcma_cc_set32(cc, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_NOILPONW); + bcma_pmu_pll_init(cc); bcma_pmu_resources_init(cc); bcma_pmu_workarounds(cc); } @@ -480,6 +603,8 @@ tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW; break; + case BCMA_CHIP_ID_BCM43131: + case BCMA_CHIP_ID_BCM43217: case BCMA_CHIP_ID_BCM43227: case BCMA_CHIP_ID_BCM43228: case BCMA_CHIP_ID_BCM43428: