--- zzzz-none-000/linux-3.10.107/drivers/bcma/host_pci.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/bcma/host_pci.c 2021-02-04 17:41:59.000000000 +0000 @@ -13,10 +13,12 @@ static void bcma_host_pci_switch_core(struct bcma_device *core) { + int win2 = core->bus->host_is_pcie2 ? + BCMA_PCIE2_BAR0_WIN2 : BCMA_PCI_BAR0_WIN2; + pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN, core->addr); - pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN2, - core->wrap); + pci_write_config_dword(core->bus->host_pci, win2, core->wrap); core->bus->mapped_core = core; bcma_debug(core->bus, "Switched to core: 0x%X\n", core->id.id); } @@ -188,8 +190,11 @@ pci_write_config_dword(dev, 0x40, val & 0xffff00ff); /* SSB needed additional powering up, do we have any AMBA PCI cards? */ - if (!pci_is_pcie(dev)) - bcma_err(bus, "PCI card detected, report problems.\n"); + if (!pci_is_pcie(dev)) { + bcma_err(bus, "PCI card detected, they are not supported.\n"); + err = -ENXIO; + goto err_pci_release_regions; + } /* Map MMIO */ err = -ENOMEM; @@ -205,16 +210,29 @@ bus->boardinfo.vendor = bus->host_pci->subsystem_vendor; bus->boardinfo.type = bus->host_pci->subsystem_device; + /* Initialize struct, detect chip */ + bcma_init_bus(bus); + + /* Scan bus to find out generation of PCIe core */ + err = bcma_bus_scan(bus); + if (err) + goto err_pci_unmap_mmio; + + if (bcma_find_core(bus, BCMA_CORE_PCIE2)) + bus->host_is_pcie2 = true; + /* Register */ err = bcma_bus_register(bus); if (err) - goto err_pci_unmap_mmio; + goto err_unregister_cores; pci_set_drvdata(dev, bus); out: return err; +err_unregister_cores: + bcma_unregister_cores(bus); err_pci_unmap_mmio: pci_iounmap(dev, bus->mmio); err_pci_release_regions: @@ -235,7 +253,6 @@ pci_release_regions(dev); pci_disable_device(dev); kfree(bus); - pci_set_drvdata(dev, NULL); } #ifdef CONFIG_PM_SLEEP @@ -267,15 +284,24 @@ #endif /* CONFIG_PM_SLEEP */ -static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { +static const struct pci_device_id bcma_pci_bridge_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4313) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) }, /* 0xa8d8 */ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4360) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4365) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a0) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43b1) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43227) }, /* 0xa8db, BCM43217 (sic!) */ + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43228) }, /* 0xa8dc */ { 0, }, }; MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl); @@ -297,3 +323,65 @@ { pci_unregister_driver(&bcma_pci_bridge_driver); } + +/************************************************** + * Runtime ops for drivers. + **************************************************/ + +/* See also pcicore_up */ +void bcma_host_pci_up(struct bcma_bus *bus) +{ + if (bus->hosttype != BCMA_HOSTTYPE_PCI) + return; + + if (bus->host_is_pcie2) + bcma_core_pcie2_up(&bus->drv_pcie2); + else + bcma_core_pci_up(&bus->drv_pci[0]); +} +EXPORT_SYMBOL_GPL(bcma_host_pci_up); + +/* See also pcicore_down */ +void bcma_host_pci_down(struct bcma_bus *bus) +{ + if (bus->hosttype != BCMA_HOSTTYPE_PCI) + return; + + if (!bus->host_is_pcie2) + bcma_core_pci_down(&bus->drv_pci[0]); +} +EXPORT_SYMBOL_GPL(bcma_host_pci_down); + +/* See also si_pci_setup */ +int bcma_host_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core, + bool enable) +{ + struct pci_dev *pdev; + u32 coremask, tmp; + int err = 0; + + if (bus->hosttype != BCMA_HOSTTYPE_PCI) { + /* This bcma device is not on a PCI host-bus. So the IRQs are + * not routed through the PCI core. + * So we must not enable routing through the PCI core. */ + goto out; + } + + pdev = bus->host_pci; + + err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); + if (err) + goto out; + + coremask = BIT(core->core_index) << 8; + if (enable) + tmp |= coremask; + else + tmp &= ~coremask; + + err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp); + +out: + return err; +} +EXPORT_SYMBOL_GPL(bcma_host_pci_irq_ctl);