--- zzzz-none-000/linux-3.10.107/drivers/char/agp/ati-agp.c 2017-06-27 09:49:32.000000000 +0000 +++ scorpion-7490-727/linux-3.10.107/drivers/char/agp/ati-agp.c 2021-02-04 17:41:59.000000000 +0000 @@ -12,7 +12,7 @@ #include #include "agp.h" -#define ATI_GART_MMBASE_ADDR 0x14 +#define ATI_GART_MMBASE_BAR 1 #define ATI_RS100_APSIZE 0xac #define ATI_RS100_IG_AGPMODE 0xb0 #define ATI_RS300_APSIZE 0xf8 @@ -196,12 +196,12 @@ static int ati_configure(void) { + phys_addr_t reg; u32 temp; /* Get the memory mapped registers */ - pci_read_config_dword(agp_bridge->dev, ATI_GART_MMBASE_ADDR, &temp); - temp = (temp & 0xfffff000); - ati_generic_private.registers = (volatile u8 __iomem *) ioremap(temp, 4096); + reg = pci_resource_start(agp_bridge->dev, ATI_GART_MMBASE_BAR); + ati_generic_private.registers = (volatile u8 __iomem *) ioremap(reg, 4096); if (!ati_generic_private.registers) return -ENOMEM; @@ -211,18 +211,18 @@ else pci_write_config_dword(agp_bridge->dev, ATI_RS300_IG_AGPMODE, 0x20000); - /* address to map too */ + /* address to map to */ /* - pci_read_config_dword(agp_bridge.dev, AGP_APBASE, &temp); - agp_bridge.gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK); + agp_bridge.gart_bus_addr = pci_bus_address(agp_bridge.dev, + AGP_APERTURE_BAR); printk(KERN_INFO PFX "IGP320 gart_bus_addr: %x\n", agp_bridge.gart_bus_addr); */ writel(0x60000, ati_generic_private.registers+ATI_GART_FEATURE_ID); readl(ati_generic_private.registers+ATI_GART_FEATURE_ID); /* PCI Posting.*/ /* SIGNALED_SYSTEM_ERROR @ NB_STATUS */ - pci_read_config_dword(agp_bridge->dev, 4, &temp); - pci_write_config_dword(agp_bridge->dev, 4, temp | (1<<14)); + pci_read_config_dword(agp_bridge->dev, PCI_COMMAND, &temp); + pci_write_config_dword(agp_bridge->dev, PCI_COMMAND, temp | (1<<14)); /* Write out the address of the gatt table */ writel(agp_bridge->gatt_bus_addr, ati_generic_private.registers+ATI_GART_BASE); @@ -236,14 +236,14 @@ static int agp_ati_suspend(struct pci_dev *dev, pm_message_t state) { pci_save_state(dev); - pci_set_power_state(dev, 3); + pci_set_power_state(dev, PCI_D3hot); return 0; } static int agp_ati_resume(struct pci_dev *dev) { - pci_set_power_state(dev, 0); + pci_set_power_state(dev, PCI_D0); pci_restore_state(dev); return ati_configure(); @@ -385,8 +385,7 @@ * This is a bus address even on the alpha, b/c its * used to program the agp master not the cpu */ - pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &temp); - addr = (temp & PCI_BASE_ADDRESS_MEM_MASK); + addr = pci_bus_address(agp_bridge->dev, AGP_APERTURE_BAR); agp_bridge->gart_bus_addr = addr; /* Calculate the agp offset */ @@ -580,6 +579,6 @@ module_init(agp_ati_init); module_exit(agp_ati_cleanup); -MODULE_AUTHOR("Dave Jones "); +MODULE_AUTHOR("Dave Jones"); MODULE_LICENSE("GPL and additional rights");